<HTML><HEAD>
<META http-equiv=Content-Type content="text/html; charset=utf-8">
<META content="MSHTML 6.00.5730.13" name=GENERATOR></HEAD>
<BODY style="MARGIN: 4px 4px 1px; FONT: 10pt Tahoma">
<DIV>Hi </DIV>
<DIV> </DIV>
<DIV>I am trying to get back into setting up my home test lab. Currently I have a 1760 and a 2621, one has a PSTN connection and CME4 with two cisco phones, the other has 2 analouge phones. I even have E&M between the two as a failover... This all works as expected. </DIV>
<DIV> </DIV>
<DIV>What I have never got working is using the 1760 as a gateway router for CUCM6 virtualised on VMWARE. I have tried a basic gateway setup in CUCM with the route pattern set to phones on the gateway router. and vice versa phone on the router with dial peers set to cucm. </DIV>
<DIV> </DIV>
<DIV>BUt calls never complete, they wait and then get the fast busy tone.</DIV>
<DIV> </DIV>
<DIV>I am sure I am probably doing something silly but can't work it out. IT's been a few months since I last tried..</DIV>
<DIV> </DIV>
<DIV> </DIV>
<DIV>Has anyone got a rough and ready guide to gateway configuration between CUCM6 and a Router running IPVoice? I have scoured the internet many times but never found a simple guide.</DIV>
<DIV> </DIV>
<DIV>Cheers</DIV>
<DIV> </DIV>
<DIV>Rob</DIV>
<DIV> </DIV>
<DIV> </DIV>===============================<BR>Robin Clayton<BR>Network Manager <BR>Tel: 01228822075 </BODY></HTML>