<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2//EN">
<HTML>
<HEAD>
<META HTTP-EQUIV="Content-Type" CONTENT="text/html; charset=us-ascii">
<META NAME="Generator" CONTENT="MS Exchange Server version 6.5.7651.59">
<TITLE>CME and Linksys (Sippura) SPA-3000</TITLE>
</HEAD>
<BODY>
<!-- Converted from text/rtf format -->
<P><FONT SIZE=2 FACE="Arial"> </FONT>
</P>
<P><FONT SIZE=2 FACE="Arial">OK --</FONT>
</P>
<P><FONT SIZE=2 FACE="Arial">So tell me if this is entirely the wrong forum to ask in, but...</FONT>
</P>
<P><FONT SIZE=2 FACE="Arial">I want to connect a CME 4.1 to a SPA3000 </FONT>
<BR><FONT SIZE=2 FACE="Arial">so that the SPA3000 is an FXO connection to the PSTN.</FONT>
</P>
<P><FONT SIZE=2 FACE="Arial">I've got this much done:</FONT>
</P>
<P><FONT SIZE=2 FACE="Arial">"</FONT>
<BR><B><FONT SIZE=2 FACE="Arial">dial-peer voice 2 voip</FONT></B>
<BR><B><FONT SIZE=2 FACE="Arial"> description **Outgoing call to SIP trunk**</FONT></B>
<BR><B><FONT SIZE=2 FACE="Arial"> destination-pattern .T</FONT></B>
<BR><B><FONT SIZE=2 FACE="Arial"> voice-class codec 1</FONT></B>
<BR><B><FONT SIZE=2 FACE="Arial"> voice-class sip dtmf-relay force rtp-nte</FONT></B>
<BR><B><FONT SIZE=2 FACE="Arial"> session protocol sipv2</FONT></B>
<BR><B><FONT SIZE=2 FACE="Arial"> session target ipv4:XXX.YYY.ZZZ.ZZZ:5060</FONT></B>
<BR><B><FONT SIZE=2 FACE="Arial"> dtmf-relay rtp-nte</FONT></B>
<BR><B><FONT SIZE=2 FACE="Arial"> no vad</FONT></B>
<BR><B><FONT SIZE=2 FACE="Arial">!</FONT></B>
<BR><B><FONT SIZE=2 FACE="Arial">dial-peer voice 1 voip</FONT></B>
<BR><B><FONT SIZE=2 FACE="Arial"> description **Incoming call from SIP trunk**</FONT></B>
<BR><B><FONT SIZE=2 FACE="Arial"> max-conn 1</FONT></B>
<BR><B><FONT SIZE=2 FACE="Arial"> destination-pattern 3701</FONT></B>
<BR><B><FONT SIZE=2 FACE="Arial"> voice-class codec 1</FONT></B>
<BR><B><FONT SIZE=2 FACE="Arial"> voice-class sip dtmf-relay force rtp-nte</FONT></B>
<BR><B><FONT SIZE=2 FACE="Arial"> session protocol sipv2</FONT></B>
<BR><B><FONT SIZE=2 FACE="Arial"> session target sip-server</FONT></B>
<BR><B><FONT SIZE=2 FACE="Arial"> incoming called-number .</FONT></B>
<BR><B><FONT SIZE=2 FACE="Arial"> dtmf-relay rtp-nte</FONT></B>
<BR><B><FONT SIZE=2 FACE="Arial"> no vad</FONT></B>
<BR><FONT SIZE=2 FACE="Arial">"</FONT>
</P>
<P><FONT SIZE=2 FACE="Arial">I think that's all that might be needed on the CME side</FONT>
</P>
<P><FONT SIZE=2 FACE="Arial">I was wondering what, if any of you know, must be done on the web interface for the Sippura 3000?</FONT>
</P>
<BR>
<P><FONT SIZE=2 FACE="Arial">Or -- am I barking up entirely the wrong tree, and I cannot use an SPA3000 to be a SIP trunk connecting to the PSTN.</FONT>
</P>
<P><FONT SIZE=2 FACE="Arial">I see lots of discussion of SIP providers like Broadvoice being connected to the Sippura/Linksys devices, but not much discussion of what I'm trying to do.</FONT></P>
<P><FONT SIZE=2 FACE="Arial">(which could mean I'm trying to use a 2x4 to clean windows with...)</FONT>
</P>
<BR>
<P><FONT SIZE=2 FACE="Arial">Tim Reimers</FONT>
<BR><FONT SIZE=2 FACE="Arial">Systems Analyst II</FONT>
<BR><FONT SIZE=2 FACE="Arial">Information Technology Services</FONT>
<BR><FONT SIZE=2 FACE="Arial">City of Asheville</FONT>
<BR><FONT SIZE=2 FACE="Arial">70 Court Plaza</FONT>
<BR><FONT SIZE=2 FACE="Arial">Asheville, NC 28801</FONT>
<BR><FONT SIZE=2 FACE="Arial">phone - 828-259-5512</FONT>
<BR><A HREF="mailto:timreimers@ashevillenc.gov"><U><FONT COLOR="#0000FF" SIZE=2 FACE="Arial">treimers@ashevillenc.gov</FONT></U></A>
</P>
</BODY>
</HTML>