<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
<html>
<head>
<meta content="text/html; charset=UTF-8" http-equiv="Content-Type">
</head>
<body bgcolor="#ffffff" text="#000000">
Hi Craig,<br>
<br>
But Unity talks g729 ?<br>
<pre class="moz-signature" cols="72">--
Dew Swen
CCVP, CCNP</pre>
<br>
<br>
28.05.2010 14:11, Craig Staffin yazmış:
<blockquote cite="mid:EBE4844E-A3B7-4245-8873-88C2CC3A8151@gmail.com"
type="cite">
<div><br>
Voip dialpeers are g729 by default</div>
<div><br>
</div>
<div>Add codec g711 under the unity one. </div>
<div><br>
Craig Staffin
<div>Lead voice consulting engineer - CCNA, CCVP, CCIE# 25802 (Voice)</div>
<div>Core BTS</div>
<div>+1 262 754 2634</div>
<div><a moz-do-not-send="true" href="mailto:craig.staffin@corebts.com">craig.staffin@corebts.com</a></div>
</div>
<div><br>
On May 28, 2010, at 5:47 AM, Dew Swen <<a moz-do-not-send="true"
href="mailto:dew.swen@gmail.com">dew.swen@gmail.com</a>> wrote:<br>
<br>
</div>
<blockquote type="cite">
<div>The flow is something like that:<br>
<br>
I forwarded the call after 15 secs to a route pattern (666669999) from
extention's line settings. Route pattern directs call to gateway.<br>
<br>
I created this dial-peer in order to trigger the tcl script:<br>
<br>
dial-peer voice 1111 voip<br>
service unity<br>
codec g711ulaw <br>
incoming called-number 666669999<br>
<br>
After that, in order to sent call to Unity's pilot number (5000) I
created this dial-peer:<br>
<br>
dial-peer voice 1112 voip<br>
destination-pattern 5000<br>
session target ipv4:10.10.10.11<br>
<br>
10.10.10.11 is the CUCM's IP address.<br>
<br>
<br>
Do I need a xcoder?<br>
<br>
Because when I directs call to another extention or PSTN number, it
works fine.<br>
<br clear="all">
-<br>
Dew Swen<br>
CCVP, CCNP<br>
<br>
<br>
<div class="gmail_quote">2010/5/28 Dew Swen <span dir="ltr"><<a
moz-do-not-send="true" href="mailto:dew.swen@gmail.com">dew.swen@gmail.com</a>></span><br>
<blockquote class="gmail_quote"
style="border-left: 1px solid rgb(204, 204, 204); margin: 0pt 0pt 0pt 0.8ex; padding-left: 1ex;">Hi
there,<br>
<br>
I want to direct call to Unity with a TCL script on a Cisco router.
Script works fine when I direct call to another extention or PSTN
number. But when I forward the call to Unity's pilot number, the call
stays in suspense and hangs up.<br>
<br>
The script is attached. First it plays a message then directs it to
Unity.<br>
<br>
Is there anything related codec issue? Any thoughts will be helpful.<br>
<br>
Regards,<br>
<font color="#888888"><br>
-- <br>
Dew Swen<br>
CCVP, CCNP<br>
<br>
</font></blockquote>
</div>
<br>
</div>
</blockquote>
<blockquote type="cite">
<div><span>_______________________________________________</span><br>
<span>cisco-voip mailing list</span><br>
<span><a moz-do-not-send="true"
href="mailto:cisco-voip@puck.nether.net">cisco-voip@puck.nether.net</a></span><br>
<span><a moz-do-not-send="true"
href="https://puck.nether.net/mailman/listinfo/cisco-voip">https://puck.nether.net/mailman/listinfo/cisco-voip</a></span><br>
</div>
</blockquote>
</blockquote>
<br>
<br>
</body>
</html>