<table cellspacing="0" cellpadding="0" border="0" ><tr><td valign="top" style="font: inherit;"><DIV>If everything is on LAN, you may send G.711 call from CUCM to GW, play the prompt via TCL and send it back to CUCM (Pointing to Unity Pilot). Unity does support G.711 and G.729 simultaneously, in case you wish to send G.729 from CUCM to GW, play the prompt and send it back to Unity (G.729) then definately you need Xcoder.</DIV>
<DIV> </DIV>
<DIV>You need to configure your router as CME and register Xcoder to this in case you are doing G729-G711. You won't need additional MTP. </DIV>
<DIV> </DIV>
<DIV><BR><BR>--- On <B>Wed, 6/23/10, Dew Swen <I><dew.swen@gmail.com></I></B> wrote:<BR></DIV>
<BLOCKQUOTE style="PADDING-LEFT: 5px; MARGIN-LEFT: 5px; BORDER-LEFT: rgb(16,16,255) 2px solid"><BR>From: Dew Swen <dew.swen@gmail.com><BR>Subject: Re: [cisco-voip] sending calls form a voip dialpeer to another dialpeer<BR>To: "kapil atrish" <nice_chatin@yahoo.com><BR>Cc: "Mac GroupStudy" <mac.groupstudy@gmail.com>, "cisco-voip@puck.nether.net" <cisco-voip@puck.nether.net><BR>Date: Wednesday, June 23, 2010, 2:15 PM<BR><BR>
<DIV id=yiv3546935><BR>Yes Kapil, I am playing a prompt and that forward call to Unity. I play the prompt in g711 as you said.<BR><BR>Do I need to send call to CUCM (Unity's hunt pilot number) in a g729 format? Unity talks g729. If it is like that I need xcoder.<BR><BR>What about MTP?<BR><BR>Regards,<BR><PRE class=moz-signature>--
Dew Swen
CCVP, CCNP</PRE><BR><BR>23.06.2010 11:02, kapil atrish yazmış:
<BLOCKQUOTE type="cite">
<TABLE cellSpacing=0 cellPadding=0 border=0>
<TBODY>
<TR>
<TD style="FONT-FAMILY: inherit; font-size-adjust: inherit; font-stretch: inherit" vAlign=top>
<DIV><BR>Are you playing any prompts via TCL, it supports only G.711 for voice prompts. Depending upon requirements you may need Xcoder on GW to get it working. </DIV>
<DIV> </DIV>
<DIV><BR>--- On <B>Wed, 6/23/10, Dew Swen <I><A class=moz-txt-link-rfc2396E href="http://us.mc550.mail.yahoo.com/mc/compose?to=dew.swen@gmail.com" target=_blank rel=nofollow ymailto="mailto:dew.swen@gmail.com"><dew.swen@gmail.com></A></I></B> wrote:<BR></DIV>
<BLOCKQUOTE style="PADDING-LEFT: 5px; MARGIN-LEFT: 5px; BORDER-LEFT: rgb(16,16,255) 2px solid"><BR>From: Dew Swen <A class=moz-txt-link-rfc2396E href="http://us.mc550.mail.yahoo.com/mc/compose?to=dew.swen@gmail.com" target=_blank rel=nofollow ymailto="mailto:dew.swen@gmail.com"><dew.swen@gmail.com></A><BR>Subject: Re: [cisco-voip] sending calls form a voip dialpeer to another dialpeer<BR>To: "Mac GroupStudy" <A class=moz-txt-link-rfc2396E href="http://us.mc550.mail.yahoo.com/mc/compose?to=mac.groupstudy@gmail.com" target=_blank rel=nofollow ymailto="mailto:mac.groupstudy@gmail.com"><mac.groupstudy@gmail.com></A><BR>Cc: <A class=moz-txt-link-rfc2396E href="http://us.mc550.mail.yahoo.com/mc/compose?to=cisco-voip@puck.nether.net" target=_blank rel=nofollow ymailto="mailto:cisco-voip@puck.nether.net">"cisco-voip@puck.nether.net"</A> <A class=moz-txt-link-rfc2396E href="http://us.mc550.mail.yahoo.com/mc/compose?to=cisco-voip@puck.nether.net"
target=_blank rel=nofollow ymailto="mailto:cisco-voip@puck.nether.net"><cisco-voip@puck.nether.net></A><BR>Date: Wednesday, June 23, 2010, 12:34 PM<BR><BR>
<DIV id=yiv1723373413>Hi Mac,<BR><BR>Yes this command works for my 2821 router.<BR><BR>I need to send call to Unity with a tcl script. I got the call from CUCM (by using a translation pattern) with a voip dial-peer; after that I need to send this call to Unity with a voip dial-peer. That's why I need 2 voip dialpeer.<BR><BR>The main question is this?<BR><BR>"What else I need? MTP? Or any other tricks that I must do?"<BR><BR>Waiting for your suggestions.<BR><BR>Regards,<BR><BR><PRE class=moz-signature>--
Dew Swen
CCVP, CCNP</PRE><BR><BR>23.06.2010 01:35, Mac GroupStudy yazmış:
<BLOCKQUOTE type="cite">If your router supports the command you don't even need a CUBE. Try the command I referenced to see if it is supported first. Also consider why you need to route from one VOIP DP to another. A true CUBE solution maybe your best bet.<BR><BR>
<DIV class=gmail_quote>On Tue, Jun 22, 2010 at 4:02 PM, Dew Swen <SPAN dir=ltr><<A href="http://us.mc550.mail.yahoo.com/mc/compose?to=dew.swen@gmail.com" target=_blank rel=nofollow>dew.swen@gmail.com</A>></SPAN> wrote:<BR>
<BLOCKQUOTE class=gmail_quote style="PADDING-LEFT: 1ex; MARGIN: 0pt 0pt 0pt 0.8ex; BORDER-LEFT: rgb(204,204,204) 1px solid">
<DIV>
<DIV>Other than cube what is needed?</DIV>
<DIV><BR></DIV>
<DIV>Regards,</DIV>
<DIV><BR></DIV><FONT color=#888888>
<DIV>--</DIV>
<DIV>Dew Swen</DIV>
<DIV>CCVP, CCNP</DIV></FONT>
<DIV>
<DIV class=h5>
<DIV><BR><BR><BR></DIV>
<DIV><BR>On 22.Haz.2010, at 16:32, Mac GroupStudy <<A href="http://us.mc550.mail.yahoo.com/mc/compose?to=mac.groupstudy@gmail.com" target=_blank rel=nofollow>mac.groupstudy@gmail.com</A>> wrote:<BR><BR></DIV>
<BLOCKQUOTE type="cite">
<DIV>Prior to CUBE there was a concept of an IP-IP Gateway. It and CUBE requires something similar to this:
<DIV>config)# voice service voip</DIV>
<DIV># allow-connections h323 to h323</DIV>
<DIV><BR><BR>
<DIV class=gmail_quote>On Tue, Jun 22, 2010 at 8:41 AM, Dew Swen <SPAN dir=ltr><<A href="http://us.mc550.mail.yahoo.com/mc/compose?to=dew.swen@gmail.com" target=_blank rel=nofollow>dew.swen@gmail.com</A>></SPAN> wrote:<BR>
<BLOCKQUOTE class=gmail_quote style="PADDING-LEFT: 1ex; MARGIN: 0pt 0pt 0pt 0.8ex; BORDER-LEFT: rgb(204,204,204) 1px solid">Could anyone shed on some light about:<BR><BR>"What is needed for sending calls from a voip dial-peer to voip dial-peer in a h323 gw?"<BR><BR>AFAIK,<BR>- CUBE functions must be enabled<BR>- MTP must be configured on both CUCM and IOS<BR>- Have to do something in CUCM Gateway configuration??<BR><BR>Any help or document will be appriciated.<BR><BR>Kind regards,<BR><BR>-- <BR>Dew Swen<BR>CCVP, CCNP<BR><BR><BR>_______________________________________________<BR>cisco-voip mailing list<BR><A href="http://us.mc550.mail.yahoo.com/mc/compose?to=cisco-voip@puck.nether.net" target=_blank rel=nofollow>cisco-voip@puck.nether.net</A><BR><A href="https://puck.nether.net/mailman/listinfo/cisco-voip" target=_blank
rel=nofollow>https://puck.nether.net/mailman/listinfo/cisco-voip</A><BR></BLOCKQUOTE></DIV><BR></DIV></DIV></BLOCKQUOTE></DIV></DIV></DIV></BLOCKQUOTE></DIV><BR></BLOCKQUOTE><BR></DIV><BR>-----Inline Attachment Follows-----<BR><BR>
<DIV class=plainMail>_______________________________________________<BR>cisco-voip mailing list<BR><A href="http://us.mc550.mail.yahoo.com/mc/compose?to=cisco-voip@puck.nether.net" target=_blank rel=nofollow>cisco-voip@puck.nether.net</A><BR><A href="https://puck.nether.net/mailman/listinfo/cisco-voip" target=_blank rel=nofollow>https://puck.nether.net/mailman/listinfo/cisco-voip</A><BR></DIV></BLOCKQUOTE></TD></TR></TBODY></TABLE><BR></BLOCKQUOTE><BR><BR></DIV></BLOCKQUOTE></td></tr></table><br>