<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
<html>
<head>
<meta content="text/html; charset=UTF-8" http-equiv="Content-Type">
</head>
<body bgcolor="#ffffff" text="#000000">
Thanks Kapil,<br>
<br>
I got everything clearly.<br>
<br>
But just one thing: My gateway is configured as a normal H323 gateway
and registers to CUCM. (provides SRST as call-manager-fallback). Do I
need to configure anything special on the CUCM GW settings?<br>
<br>
Regards,<br>
<br>
<pre class="moz-signature" cols="72">--
Dew Swen
CCVP, CCNP</pre>
<br>
23.06.2010 11:53, kapil atrish yazmış:
<blockquote cite="mid:900586.37504.qm@web55005.mail.re4.yahoo.com"
type="cite">
<table border="0" cellpadding="0" cellspacing="0">
<tbody>
<tr>
<td
style="font-family: inherit; font-style: inherit; font-variant: inherit; font-weight: inherit; font-size: inherit; line-height: inherit; font-size-adjust: inherit; font-stretch: inherit; -x-system-font: none;"
valign="top">
<div>If everything is on LAN, you may send G.711 call from CUCM
to GW, play the prompt via TCL and send it back to CUCM (Pointing to
Unity Pilot). Unity does support G.711 and G.729 simultaneously, in
case you wish to send G.729 from CUCM to GW, play the prompt and send
it back to Unity (G.729) then definately you need Xcoder.</div>
<div> </div>
<div>You need to configure your router as CME and register
Xcoder to this in case you are doing G729-G711. You won't need
additional MTP. </div>
<div> </div>
<div><br>
<br>
--- On <b>Wed, 6/23/10, Dew Swen <i><a class="moz-txt-link-rfc2396E" href="mailto:dew.swen@gmail.com"><dew.swen@gmail.com></a></i></b>
wrote:<br>
</div>
<blockquote
style="border-left: 2px solid rgb(16, 16, 255); padding-left: 5px; margin-left: 5px;"><br>
From: Dew Swen <a class="moz-txt-link-rfc2396E" href="mailto:dew.swen@gmail.com"><dew.swen@gmail.com></a><br>
Subject: Re: [cisco-voip] sending calls form a voip dialpeer to another
dialpeer<br>
To: "kapil atrish" <a class="moz-txt-link-rfc2396E" href="mailto:nice_chatin@yahoo.com"><nice_chatin@yahoo.com></a><br>
Cc: "Mac GroupStudy" <a class="moz-txt-link-rfc2396E" href="mailto:mac.groupstudy@gmail.com"><mac.groupstudy@gmail.com></a>,
<a class="moz-txt-link-rfc2396E" href="mailto:cisco-voip@puck.nether.net">"cisco-voip@puck.nether.net"</a> <a class="moz-txt-link-rfc2396E" href="mailto:cisco-voip@puck.nether.net"><cisco-voip@puck.nether.net></a><br>
Date: Wednesday, June 23, 2010, 2:15 PM<br>
<br>
<div id="yiv3546935"><br>
Yes Kapil, I am playing a prompt and that forward call to Unity. I play
the prompt in g711 as you said.<br>
<br>
Do I need to send call to CUCM (Unity's hunt pilot number) in a g729
format? Unity talks g729. If it is like that I need xcoder.<br>
<br>
What about MTP?<br>
<br>
Regards,<br>
<pre class="moz-signature">--
Dew Swen
CCVP, CCNP</pre>
<br>
<br>
23.06.2010 11:02, kapil atrish yazmış:
<blockquote type="cite">
<table border="0" cellpadding="0" cellspacing="0">
<tbody>
<tr>
<td
style="font-family: inherit; font-size-adjust: inherit; font-stretch: inherit;"
valign="top">
<div><br>
Are you playing any prompts via TCL, it supports only G.711 for voice
prompts. Depending upon requirements you may need Xcoder on GW to get
it working. </div>
<div> </div>
<div><br>
--- On <b>Wed, 6/23/10, Dew Swen <i><a moz-do-not-send="true"
class="moz-txt-link-rfc2396E"
href="http://us.mc550.mail.yahoo.com/mc/compose?to=dew.swen@gmail.com"
target="_blank" rel="nofollow" ymailto="mailto:dew.swen@gmail.com"><dew.swen@gmail.com></a></i></b>
wrote:<br>
</div>
<blockquote
style="border-left: 2px solid rgb(16, 16, 255); padding-left: 5px; margin-left: 5px;"><br>
From: Dew Swen <a moz-do-not-send="true" class="moz-txt-link-rfc2396E"
href="http://us.mc550.mail.yahoo.com/mc/compose?to=dew.swen@gmail.com"
target="_blank" rel="nofollow" ymailto="mailto:dew.swen@gmail.com"><dew.swen@gmail.com></a><br>
Subject: Re: [cisco-voip] sending calls form a voip dialpeer to another
dialpeer<br>
To: "Mac GroupStudy" <a moz-do-not-send="true"
class="moz-txt-link-rfc2396E"
href="http://us.mc550.mail.yahoo.com/mc/compose?to=mac.groupstudy@gmail.com"
target="_blank" rel="nofollow"
ymailto="mailto:mac.groupstudy@gmail.com"><mac.groupstudy@gmail.com></a><br>
Cc: <a moz-do-not-send="true" class="moz-txt-link-rfc2396E"
href="http://us.mc550.mail.yahoo.com/mc/compose?to=cisco-voip@puck.nether.net"
target="_blank" rel="nofollow"
ymailto="mailto:cisco-voip@puck.nether.net">"cisco-voip@puck.nether.net"</a>
<a moz-do-not-send="true"
class="moz-txt-link-rfc2396E"
href="http://us.mc550.mail.yahoo.com/mc/compose?to=cisco-voip@puck.nether.net"
target="_blank" rel="nofollow"
ymailto="mailto:cisco-voip@puck.nether.net"><cisco-voip@puck.nether.net></a><br>
Date: Wednesday, June 23, 2010, 12:34 PM<br>
<br>
<div id="yiv1723373413">Hi Mac,<br>
<br>
Yes this command works for my 2821 router.<br>
<br>
I need to send call to Unity with a tcl script. I got the call from
CUCM (by using a translation pattern) with a voip dial-peer; after that
I need to send this call to Unity with a voip dial-peer. That's why I
need 2 voip dialpeer.<br>
<br>
The main question is this?<br>
<br>
"What else I need? MTP? Or any other tricks that I must do?"<br>
<br>
Waiting for your suggestions.<br>
<br>
Regards,<br>
<br>
<pre class="moz-signature">--
Dew Swen
CCVP, CCNP</pre>
<br>
<br>
23.06.2010 01:35, Mac GroupStudy yazmış:
<blockquote type="cite">If your router supports the
command you don't even need a CUBE. Try the command I referenced to see
if it is supported first. Also consider why you need to route from one
VOIP DP to another. A true CUBE solution maybe your best bet.<br>
<br>
<div class="gmail_quote">On Tue, Jun 22, 2010 at
4:02 PM, Dew Swen <span dir="ltr"><<a moz-do-not-send="true"
href="http://us.mc550.mail.yahoo.com/mc/compose?to=dew.swen@gmail.com"
target="_blank" rel="nofollow">dew.swen@gmail.com</a>></span> wrote:<br>
<blockquote class="gmail_quote"
style="border-left: 1px solid rgb(204, 204, 204); margin: 0pt 0pt 0pt 0.8ex; padding-left: 1ex;">
<div>
<div>Other than cube what is needed?</div>
<div><br>
</div>
<div>Regards,</div>
<div><br>
</div>
<font color="#888888">
<div>--</div>
<div>Dew Swen</div>
<div>CCVP, CCNP</div>
</font>
<div>
<div class="h5">
<div><br>
<br>
<br>
</div>
<div><br>
On 22.Haz.2010, at 16:32, Mac GroupStudy <<a moz-do-not-send="true"
href="http://us.mc550.mail.yahoo.com/mc/compose?to=mac.groupstudy@gmail.com"
target="_blank" rel="nofollow">mac.groupstudy@gmail.com</a>> wrote:<br>
<br>
</div>
<blockquote type="cite">
<div>Prior to CUBE there was a concept of an
IP-IP Gateway. It and CUBE requires something similar to this:
<div>config)# voice service voip</div>
<div># allow-connections h323 to h323</div>
<div><br>
<br>
<div class="gmail_quote">On Tue, Jun 22, 2010
at 8:41 AM, Dew Swen <span dir="ltr"><<a moz-do-not-send="true"
href="http://us.mc550.mail.yahoo.com/mc/compose?to=dew.swen@gmail.com"
target="_blank" rel="nofollow">dew.swen@gmail.com</a>></span> wrote:<br>
<blockquote class="gmail_quote"
style="border-left: 1px solid rgb(204, 204, 204); margin: 0pt 0pt 0pt 0.8ex; padding-left: 1ex;">Could
anyone shed on some light about:<br>
<br>
"What is needed for sending calls from a voip dial-peer to voip
dial-peer in a h323 gw?"<br>
<br>
AFAIK,<br>
- CUBE functions must be enabled<br>
- MTP must be configured on both CUCM and IOS<br>
- Have to do something in CUCM Gateway configuration??<br>
<br>
Any help or document will be appriciated.<br>
<br>
Kind regards,<br>
<br>
-- <br>
Dew Swen<br>
CCVP, CCNP<br>
<br>
<br>
_______________________________________________<br>
cisco-voip mailing list<br>
<a moz-do-not-send="true"
href="http://us.mc550.mail.yahoo.com/mc/compose?to=cisco-voip@puck.nether.net"
target="_blank" rel="nofollow">cisco-voip@puck.nether.net</a><br>
<a moz-do-not-send="true"
href="https://puck.nether.net/mailman/listinfo/cisco-voip"
target="_blank" rel="nofollow">https://puck.nether.net/mailman/listinfo/cisco-voip</a><br>
</blockquote>
</div>
<br>
</div>
</div>
</blockquote>
</div>
</div>
</div>
</blockquote>
</div>
<br>
</blockquote>
<br>
</div>
<br>
-----Inline Attachment Follows-----<br>
<br>
<div class="plainMail">_______________________________________________<br>
cisco-voip mailing list<br>
<a moz-do-not-send="true"
href="http://us.mc550.mail.yahoo.com/mc/compose?to=cisco-voip@puck.nether.net"
target="_blank" rel="nofollow">cisco-voip@puck.nether.net</a><br>
<a moz-do-not-send="true"
href="https://puck.nether.net/mailman/listinfo/cisco-voip"
target="_blank" rel="nofollow">https://puck.nether.net/mailman/listinfo/cisco-voip</a><br>
</div>
</blockquote>
</td>
</tr>
</tbody>
</table>
<br>
</blockquote>
<br>
<br>
</div>
</blockquote>
</td>
</tr>
</tbody>
</table>
<br>
</blockquote>
<br>
</body>
</html>