<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
<html>
<head>
<meta content="text/html; charset=ISO-8859-1"
http-equiv="Content-Type">
<title></title>
</head>
<body bgcolor="#ffffff" text="#000000">
Hi Mac,<br>
<br>
Yes this command works for my 2821 router.<br>
<br>
I need to send call to Unity with a tcl script. I got the call from
CUCM (by using a translation pattern) with a voip dial-peer; after that
I need to send this call to Unity with a voip dial-peer. That's why I
need 2 voip dialpeer.<br>
<br>
The main question is this?<br>
<br>
"What else I need? MTP? Or any other tricks that I must do?"<br>
<br>
Waiting for your suggestions.<br>
<br>
Regards,<br>
<br>
<pre class="moz-signature" cols="72">--
Dew Swen
CCVP, CCNP</pre>
<br>
<br>
23.06.2010 01:35, Mac GroupStudy yazmış:
<blockquote
cite="mid:AANLkTin32QHmfcsUcHLnvfszgossyIl0Yx33PnCvAv7d@mail.gmail.com"
type="cite">If your router supports the command you don't even need a
CUBE. Try the command I referenced to see if it is supported first.
Also consider why you need to route from one VOIP DP to another. A true
CUBE solution maybe your best bet.<br>
<br>
<div class="gmail_quote">On Tue, Jun 22, 2010 at 4:02 PM, Dew Swen <span
dir="ltr"><<a moz-do-not-send="true"
href="mailto:dew.swen@gmail.com">dew.swen@gmail.com</a>></span>
wrote:<br>
<blockquote class="gmail_quote"
style="border-left: 1px solid rgb(204, 204, 204); margin: 0pt 0pt 0pt 0.8ex; padding-left: 1ex;">
<div bgcolor="#FFFFFF">
<div>Other than cube what is needed?</div>
<div><br>
</div>
<div>Regards,</div>
<div><br>
</div>
<font color="#888888">
<div>--</div>
<div>Dew Swen</div>
<div>CCVP, CCNP</div>
</font>
<div>
<div class="h5">
<div><br>
<br>
<br>
</div>
<div><br>
On 22.Haz.2010, at 16:32, Mac GroupStudy <<a moz-do-not-send="true"
href="mailto:mac.groupstudy@gmail.com" target="_blank">mac.groupstudy@gmail.com</a>>
wrote:<br>
<br>
</div>
<blockquote type="cite">
<div>Prior to CUBE there was a concept of an IP-IP Gateway. It
and CUBE requires something similar to this:
<div>config)# voice service voip</div>
<div># allow-connections h323 to h323</div>
<div><br>
<br>
<div class="gmail_quote">On Tue, Jun 22, 2010 at 8:41 AM, Dew
Swen <span dir="ltr"><<a moz-do-not-send="true"
href="mailto:dew.swen@gmail.com" target="_blank">dew.swen@gmail.com</a>></span>
wrote:<br>
<blockquote class="gmail_quote"
style="border-left: 1px solid rgb(204, 204, 204); margin: 0pt 0pt 0pt 0.8ex; padding-left: 1ex;">Could
anyone shed on some light about:<br>
<br>
"What is needed for sending calls from a voip dial-peer to voip
dial-peer in a h323 gw?"<br>
<br>
AFAIK,<br>
- CUBE functions must be enabled<br>
- MTP must be configured on both CUCM and IOS<br>
- Have to do something in CUCM Gateway configuration??<br>
<br>
Any help or document will be appriciated.<br>
<br>
Kind regards,<br>
<br>
-- <br>
Dew Swen<br>
CCVP, CCNP<br>
<br>
<br>
_______________________________________________<br>
cisco-voip mailing list<br>
<a moz-do-not-send="true"
href="mailto:cisco-voip@puck.nether.net" target="_blank">cisco-voip@puck.nether.net</a><br>
<a moz-do-not-send="true"
href="https://puck.nether.net/mailman/listinfo/cisco-voip"
target="_blank">https://puck.nether.net/mailman/listinfo/cisco-voip</a><br>
</blockquote>
</div>
<br>
</div>
</div>
</blockquote>
</div>
</div>
</div>
</blockquote>
</div>
<br>
</blockquote>
<br>
</body>
</html>