<html><head><style type='text/css'>p { margin: 0; }</style></head><body><div style='font-family: Verdana; font-size: 10pt; color: #000000'>Ed,<br>I have the variables as stated, but the strange thing is when I select the service I get:<br>ID<br>Password<br>Extension<br><span><br><div><div><div>Tried to use this in the service definition, but no success<br><font color="#009900"></font></div></div></div><br></span><br>----- Oorspronkelijk bericht -----<br>Van: "Ed Leatherman" <ealeatherman@gmail.com><br>Aan: "Marty van de Veerdonk" <marty@voiceidentity.nl><br>Cc: "cisco-voip" <cisco-voip@puck.nether.net><br>Verzonden: Vrijdag 23 juli 2010 14:41:33<br>Onderwerp: Re: [cisco-voip] Auto login IP Phone Agent<br><br>I have used this with UCCX 4 up to 7 so far with no problems.<br><br>Make sure the ID, Ext, Pwd variables are exactly how they appear in<br>the doc, I think they might be case sensitive.Might just have one of<br>them off and so it re-prompts for the login.<br><br>If you want to really make it easy for them and have enough buttons,<br>you can also setup service buttons for "ready" etc as well. they are<br>just calls to URL with different parameters.<br><br>On Fri, Jul 23, 2010 at 7:51 AM, Marty van de Veerdonk<br><marty@voiceidentity.nl> wrote:<br>> Hello,<br>> i'm using IP phone agent on CCM6 to contact to ICM 7.<br>> The service url works, but I would like to make login procedure<br>> automatically.<br>><br>> Used this manual, but still I need to enter the ID, ext and password<br>> http://www.cisco.com/en/US/products/sw/custcosw/ps1846/products_tech_note09186a008029e6d5.shtml#procConfiguring<br>><br>> Any ideas?<br>><br>><br>><br>> _______________________________________________<br>> cisco-voip mailing list<br>> cisco-voip@puck.nether.net<br>> https://puck.nether.net/mailman/listinfo/cisco-voip<br>><br>><br><br><br><br>-- <br>Ed Leatherman<br></div></body></html>