Get yourself a T1/E1 cross-over cable first. here is the PIN config:<br><br>END 1<br>PIN 1 ORANGE/WHITE<br>PIN 2 ORANGE<br>PIN 4 BLUE<br>PIN 5 BLUE/WHITE<br><br>END 2<br>PIN 1 BLUE/WHITE<br>PIN 2 BLUE<br>PIN 4 ORANGE<br>PIN 5 ORANGE/WHITE<br>
<br>1 and 2 = Receive<br>4 and 5 = Transmit<br><br><div class="gmail_quote">On Sun, Jul 25, 2010 at 10:16 AM, itservices88 <span dir="ltr"><<a href="mailto:itservices88@gmail.com">itservices88@gmail.com</a>></span> wrote:<br>
<blockquote class="gmail_quote" style="margin: 0pt 0pt 0pt 0.8ex; border-left: 1px solid rgb(204, 204, 204); padding-left: 1ex;"><div>Hi,</div>
<div> </div>
<div>I am testing in lab a Cisco router connected back to back with Digium T1/E1 card.</div>
<div> </div>
<div>Since this is my first time, so i need some suggestions on how to connect them in different configurations e.g. ISDN PRI, inidividuals DS0 channels or channel-groups and how to design a dial-peer ... any links or sample configurations will be appreciated.</div>
<div> </div>
<div>-dani</div>
<div> </div>
<br>_______________________________________________<br>
cisco-voip mailing list<br>
<a href="mailto:cisco-voip@puck.nether.net">cisco-voip@puck.nether.net</a><br>
<a href="https://puck.nether.net/mailman/listinfo/cisco-voip" target="_blank">https://puck.nether.net/mailman/listinfo/cisco-voip</a><br>
<br></blockquote></div><br><br clear="all"><br>-- <br>Thanks,<br>Syed Khalid Ali<br><br>