<font size=2 face="sans-serif">Dana,</font>
<br>
<br><font size=2 face="sans-serif">Add these to the dialpeer for calls
from pabx to voip</font>
<br>
<br><font size=3> progress_ind alert enable 8</font>
<br><font size=3>progress_ind connect enable 8</font>
<br>
<br>
<br>
<br><font size=2 face="Verdana">Regards,<br>
<b><br>
John Van Laecke </b></font><font size=2 color=#5f5f5f face="Verdana"><b><br>
Network Administrator </b></font><font size=1 color=#5f5f5f face="Verdana"><b><br>
</b></font><font size=2 color=#0060a0 face="Verdana"><b><br>
GHD</b></font><font size=1 color=#0060a0 face="Verdana"><b>
</b></font><font size=1 face="Verdana"><b>Accomplish </b></font><font size=1 color=#0060a0 face="Verdana"><b>More</b></font><font size=1 face="Verdana"><b>
Together</b></font><font size=1 color=#5f5f5f face="Verdana"><br>
T: 61 7 3316 4456 | M:0427 015 232 | V: 414456 | E: John.vanlaecke@ghd.com</font><font size=1 color=#808080 face="Verdana"><br>
</font><font size=1 color=#808080 face="Arial">Level 2, 201 Charlotte Street
QLD AUSTRALIA</font><font size=1 color=#808080 face="Verdana"> | </font><a href=http://www.ghd.com.au/_><font size=1 color=#808080 face="Verdana"><u>www.ghd.com.au</u></font></a>
<p><a href=http://www.ghd.com/sectors/water/><font size=1 color=#0060a0 face="Verdana"><u>Water</u></font></a><font size=1 color=#0060a0 face="Verdana">
| </font><a href="http://www.ghd.com/global/sectors/energy--resources/"><font size=1 color=#0060a0 face="Verdana"><u>Energy
& Resources</u></font></a><font size=1 color=#0060a0 face="Verdana">
| </font><a href=http://www.ghd.com/sectors/environment/><font size=1 color=#0060a0 face="Verdana"><u>Environment</u></font></a><font size=1 color=#0060a0 face="Verdana">
| </font><a href="http://www.ghd.com/global/sectors/property--buildings/"><font size=1 color=#0060a0 face="Verdana"><u>Property
& Buildings</u></font></a><font size=1 color=#0060a0 face="Verdana">
| </font><a href=http://www.ghd.com/global/sectors/transportation/><font size=1 color=#0060a0 face="Verdana"><u>Transportation</u></font></a><font size=1 color=#0060a0 face="Verdana"><br>
</font><font size=1 color=#008000 face="Verdana"><br>
Please consider the environment before printing this email</font><font size=1 face="Verdana">
</font>
<br>
<br>
<br>
<table width=100%>
<tr valign=top>
<td><font size=1 color=#5f5f5f face="sans-serif">From:</font>
<td><font size=1 face="sans-serif">"Dana Tong" <Dana.Tong@ivision.com.au></font>
<tr valign=top>
<td><font size=1 color=#5f5f5f face="sans-serif">To:</font>
<td><font size=1 face="sans-serif"><cisco-voip@puck.nether.net></font>
<tr valign=top>
<td><font size=1 color=#5f5f5f face="sans-serif">Date:</font>
<td><font size=1 face="sans-serif">29/07/2010 01:20 PM</font>
<tr valign=top>
<td><font size=1 color=#5f5f5f face="sans-serif">Subject:</font>
<td><font size=1 face="sans-serif">[cisco-voip] Ringback tone to from Ericsson
MD110 ( PRI H323
integration)</font>
<tr valign=top>
<td><font size=1 color=#5f5f5f face="sans-serif">Sent by:</font>
<td><font size=1 face="sans-serif">cisco-voip-bounces@puck.nether.net</font></table>
<br>
<hr noshade>
<br>
<br>
<br><tt><font size=2>Hi all,<br>
<br>
Having some problems with a PABX integration for a customer. The Ericsson
MD110 is a straight PRI connection with H323 dial peers (no QSIG) and from
what I understand QSIG is not an option.<br>
<br>
The system is setup like so:<br>
<br>
ISDN --- H323 GW --- CUCM 8.0(2C)<br>
|<br>
|_____ Ericsson MD110<br>
<br>
<br>
<br>
All inbound calls in a 200 number DID are routed to CUCM. There is a route
pattern in CUCM to send unknown numbers back to the H323 gw with a steering
code which then routes via POTS dialpeer to the PABX.<br>
<br>
Calls from external to IP phones has ringback tone<br>
Calls from external to PABX phones has ringback tone<br>
<br>
Call from IP phones to PABX phones do not have any tone.<br>
<br>
<br>
<br>
I've tried a number of different combinations of progress-ind alert, setup,
progress, connect etc and "tone ringback alert-no-pi" as well
as some of the CUCM service parameters such as:<br>
<br>
Send H225 User Info Message - Use ANN for Ringback<br>
<br>
Check Progress Indicator Before Establishing Media - True<br>
<br>
<br>
but no such luck...<br>
<br>
Does anyone know what I might be able to do to achieve a ringback tone?<br>
<br>
Thanks<br>
Dana<br>
<br>
<br>
<br>
<br>
Debug for the call from IP phone to PABX phone:<br>
<br>
033613: Jul 29 13:14:30: ISDN Se0/3/1:15 Q931: TX -> SETUP pd = 8 callref
= 0x2A6A <br>
Sending Complete <br>
Bearer Capability i = 0x8090A3 <br>
Standard = CCITT
<br>
Transfer Capability
= Speech <br>
Transfer Mode =
Circuit <br>
Transfer Rate =
64 kbit/s <br>
Channel ID i = 0xA98381 <br>
Exclusive, Channel
1 <br>
Progress Ind i = 0x8181 - Call not end-to-end
ISDN, may have in-band info <br>
Calling Party Number i = 0x4181, 'xxxx7900'
<br>
Plan:ISDN, Type:Subscriber(local)
<br>
Called Party Number i = 0xC1, 'xxxx8899' <br>
Plan:ISDN, Type:Subscriber(local)<br>
033614: Jul 29 13:14:30: ISDN Se0/3/1:15 Q931: RX <- CALL_PROC pd =
8 callref = 0xAA6A <br>
Channel ID i = 0xA98381 <br>
Exclusive, Channel
1<br>
033615: Jul 29 13:14:30: ISDN Se0/3/1:15 Q931: RX <- ALERTING pd = 8
callref = 0xAA6A <br>
Progress Ind i = 0x8182 - Destination address
is non-ISDN <br>
swanbnk-3825-r01#<br>
swanbnk-3825-r01#<br>
swanbnk-3825-r01#<br>
033616: Jul 29 13:14:33: ISDN Se0/3/1:15 Q931: TX -> DISCONNECT pd =
8 callref = 0x2A6A <br>
Cause i = 0x8290 - Normal call clearing<br>
<br>
<br>
<br>
<br>
<br>
<br>
<br>
<br>
Debug for the working external call:<br>
<br>
<br>
033619: Jul 29 13:15:18: ISDN Se0/3/0:15 Q931: RX <- SETUP pd = 8 callref
= 0x003C <br>
Sending Complete <br>
Bearer Capability i = 0x8090A3 <br>
Standard = CCITT
<br>
Transfer Capability
= Speech <br>
Transfer Mode =
Circuit <br>
Transfer Rate =
64 kbit/s <br>
Channel ID i = 0xA1838B <br>
Preferred, Channel
11 <br>
Called Party Number i = 0xC1, 'xxxx8899' <br>
Plan:ISDN, Type:Subscriber(local)<br>
033620: Jul 29 13:15:18: ISDN Se0/3/0:15 Q931: Received SETUP callref
= 0x803C callID = 0x285E switch = primary-net5 interface = User <br>
033621: Jul 29 13:15:18: ISDN Se0/3/0:15 Q931: TX -> CALL_PROC pd =
8 callref = 0x803C <br>
Channel ID i = 0xA9838B <br>
Exclusive, Channel
11<br>
033622: Jul 29 13:15:18: ISDN Se0/3/1:15 Q931: Sending SETUP callref
= 0x2A6B callID = 0xA9EC switch = primary-net5 interface = Network <br>
033623: Jul 29 13:15:18: ISDN Se0/3/1:15 Q931: TX -> SETUP pd = 8 callref
= 0x2A6B <br>
Sending Complete <br>
Bearer Capability i = 0x8090A3 <br>
Standard = CCITT
<br>
Transfer Capability
= Speech <br>
Transfer Mode =
Circuit <br>
Transfer Rate =
64 kbit/s <br>
Channel ID i = 0xA98381 <br>
Exclusive, Channel
1 <br>
Progress Ind i = 0x8181 - Call not end-to-end
ISDN, may have in-band info <br>
Called Party Number i = 0xC1, xxxx8899' <br>
Plan:ISDN, Type:Subscriber(local)<br>
033624: Jul 29 13:15:19: ISDN Se0/3/1:15 Q931: RX <- CALL_PROC pd =
8 callref = 0xAA6B <br>
Channel ID i = 0xA98381 <br>
Exclusive, Channel
1<br>
033625: Jul 29 13:15:19: ISDN Se0/3/1:15 Q931: RX <- ALERTING pd = 8
callref = 0xAA6B <br>
Progress Ind i = 0x8182 - Destination address
is non-ISDN <br>
033626: Jul 29 13:15:19: ISDN Se0/3/0:15 Q931: TX -> ALERTING pd = 8
callref = 0x803C <br>
Progress Ind i = 0x8182 - Destination address
is non-ISDN <br>
swanbnk-3825-r01#<br>
swanbnk-3825-r01#<br>
swanbnk-3825-r01#un al<br>
033627: Jul 29 13:15:21: ISDN Se0/3/0:15 Q931: RX <- DISCONNECT pd =
8 callref = 0x003C <br>
Cause i = 0x8090 - Normal call clearing<br>
033628: Jul 29 13:15:21: ISDN Se0/3/0:15 Q931: TX -> RELEASE pd = 8
callref = 0x803C<br>
033629: Jul 29 13:15:21: ISDN Se0/3/0:15 Q931: RX <- RELEASE_COMP pd
= 8 callref = 0x003C<br>
033630: Jul 29 13:15:21: ISDN Se0/3/1:15 Q931: TX -> DISCONNECT pd =
8 callref = 0x2A6B <br>
Cause i = 0x8290 - Normal call clearing<br>
033631: Jul 29 13:15:21: ISDN Se0/3/1:15 Q931: RX <- RELEASE pd = 8
callref = 0xAA6B <br>
Cause i = 0x8190 - Normal call clearing<br>
033632: Jul 29 13:15:21: ISDN Se0/3/1:15 Q931: TX -> RELEASE_COMP pd
= 8 callref = 0x2A6Bl<br>
<br>
<br>
<br>
<br>
<br>
<br>
______________________________________________________________________<br>
This email has been scanned by the MessageLabs Email Security System.<br>
For more information please visit </font></tt><a href=http://www.messagelabs.com/email><tt><font size=2>http://www.messagelabs.com/email</font></tt></a><tt><font size=2>
<br>
______________________________________________________________________<br>
<br>
_______________________________________________<br>
cisco-voip mailing list<br>
cisco-voip@puck.nether.net<br>
</font></tt><a href="https://puck.nether.net/mailman/listinfo/cisco-voip"><tt><font size=2>https://puck.nether.net/mailman/listinfo/cisco-voip</font></tt></a><tt><font size=2><br>
<br>
_____________________ <br>
This e-mail has been scanned for viruses by MessageLabs.<br>
</font></tt>
<br>
<BR>
_____________________ <BR>
This email and all attachments are confidential. For further important information about emails sent to or from GHD or if you have received this email in error, please refer to http://www.ghd.com/emaildisclaimer.html .<BR>
_____________________ <BR>
This e-mail has been scanned for viruses by MessageLabs.<BR>