<html><head><style type='text/css'>p { margin: 0; }</style></head><body><div style='font-family: Verdana; font-size: 10pt; color: #000000'><span>Hello,<br>I have an issue with a hunt pilot which works perfectly when I dail it internal, but when I dail it via its DDI it acts strange. <br>The Hunt Pilot is used behind a basic IVR menu. After the selection in the IVR menu the call rings at deskphone A, after 12 seconds mobile B is ringing. But then the calls goes back again to deskphone A, mobile B etc etc<br><br>When I cal the hunt pilot directly internal the flow works perfect. Desk A -> mobile B -> mobile C.<br><br>I thought it was a timing issue, therefor I set the maximum hunt timer to 240 seconds. This doesn't do the tric.<br>What can be the problem?<br><br><strong># SETTINGS ###############################</strong><br>User A = deskphone<br>User B = Remote destion profile with mobile number<br>User C = remote destination profile with mobile number<br><br><u>Parameters Huntpilot A:</u><br>Hunt Pilot = 83111222<br>Hunt list = huntlist_A<br>Maximum hunt timer = 240<br><br><span style="text-decoration: underline;">Parameters Line group A:</span><br>RNA reversion timeout = 12<br>Distribution algorithm = Top Down<br>No Answer = Try next member, but do not go to next group<br>Busy = Try next member, but do not go to next group<br>Not available = Try next member, but do not go to next group<br>Line Group members = <br>11111<br>22222<br>33333<br><br><br>Regards, Marty<br><br></span></div></body></html>