Your PBX is emulating ISDN network but your router is providing clock? I would double check that. Typically and logically both functions are performed by the same device, its not required but it makes sense. <div>Also as mentioned above....</div>
<div>network-clock-select 1 E1 0/1/0</div><div><br></div><div><br><br><div class="gmail_quote">On Mon, Aug 9, 2010 at 10:37 AM, Guilherme Loch Waltrick Góes <span dir="ltr"><<a href="mailto:glwgoes@gmail.com">glwgoes@gmail.com</a>></span> wrote:<br>
<blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex;">It's a simple voice gateway, there is no CCM.<br>
<br>
I'll try to upgrade to 15.0M3 and will report the status.<br>
<br>
Thanks for your help.<br>
<br>
Regards,<br>
<font color="#888888"><br>
Guilherme Loch Góes<br>
</font><div><div></div><div class="h5"><br>
<br>
<br>
<br>
On Mon, Aug 9, 2010 at 11:11 AM, Burak Dag <<a href="mailto:burdag@gmail.com">burdag@gmail.com</a>> wrote:<br>
> Hi,<br>
><br>
> can you check the region on ccm and the codecs??<br>
><br>
> Thanks<br>
><br>
><br>
> 2010/8/9 Guilherme Loch Waltrick Góes <<a href="mailto:glwgoes@gmail.com">glwgoes@gmail.com</a>><br>
>><br>
>> Hi guys,<br>
>><br>
>> We just upgraded a site that was running a 2801 with a ISDN PRI link<br>
>> to a PBX to a 2911 with the exact same setup. The setup with the 2801<br>
>> was running just fine. The problem is, running with the same config on<br>
>> the 2911 we keep getting MANY Line Code Violations and other assorted<br>
>> errors, the calls are very noisy and sometimes we can't place the<br>
>> calls from this site to the other sites.<br>
>><br>
>> Did anyone experienced the same situation? How can a solve this problem?<br>
>><br>
>> Bellow is some info about this router:<br>
>><br>
>> #sh controllers e1 0/1/0<br>
>> E1 0/1/0 is up.<br>
>> Applique type is Channelized E1 - balanced<br>
>> Description: Enlace E1 com o PABX<br>
>> No alarms detected.<br>
>> alarm-trigger is not set<br>
>> Version info Firmware: 20090408, FPGA: 13, spm_count = 0<br>
>> Framing is NO-CRC4, Line Code is HDB3, Clock Source is Internal.<br>
>> Data in current interval (38 seconds elapsed):<br>
>> 20724 Line Code Violations, 170 Path Code Violations<br>
>> 1 Slip Secs, 0 Fr Loss Secs, 38 Line Err Secs, 0 Degraded Mins<br>
>> 38 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs, 0 Unavail<br>
>> Secs<br>
>> Data in Interval 1:<br>
>> 415943 Line Code Violations, 4586 Path Code Violations<br>
>> 6 Slip Secs, 0 Fr Loss Secs, 900 Line Err Secs, 15 Degraded Mins<br>
>> 900 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs, 0 Unavail<br>
>> Secs<br>
>> Total Data (last 1 15 minute intervals):<br>
>> 415943 Line Code Violations, 4586 Path Code Violations,<br>
>> 6 Slip Secs, 0 Fr Loss Secs, 900 Line Err Secs, 15 Degraded Mins,<br>
>> 900 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs, 0 Unavail<br>
>> Secs<br>
>><br>
>> #sh ver<br>
>> Cisco IOS Software, C2900 Software (C2900-UNIVERSALK9-M), Version<br>
>> 15.0(1)M1, RELEASE SOFTWARE (fc1)<br>
>><br>
>> #sh run<br>
>> -- some output ommited --<br>
>> network-clock-participate wic 1<br>
>><br>
>> isdn switch-type primary-qsig<br>
>> isdn gateway-max-interworking<br>
>><br>
>> voice-card 0<br>
>> dsp services dspfarm<br>
>> !<br>
>> !<br>
>> !<br>
>> voice class codec 1<br>
>> codec preference 1 g729br8<br>
>> codec preference 2 g729r8<br>
>> !<br>
>> !<br>
>> controller E1 0/1/0<br>
>> framing NO-CRC4<br>
>> clock source internal<br>
>> pri-group timeslots 1-12,16<br>
>> description Enlace E1 com o PABX<br>
>> !<br>
>> interface GigabitEthernet0/0<br>
>> description LAN<br>
>> bandwidth 1000000<br>
>> ip address 172.26.130.2 255.255.255.192<br>
>> ip wccp 61 redirect in<br>
>> ip flow ingress<br>
>> ip flow egress<br>
>> duplex auto<br>
>> speed auto<br>
>> h323-gateway voip interface<br>
>> h323-gateway voip id GK_SEDE_1 ipaddr 172.254.1.3 1719<br>
>> h323-gateway voip id GK_SEDE_2 ipaddr 172.254.1.2 1719<br>
>> h323-gateway voip h323-id GW_XXXX<br>
>> h323-gateway voip tech-prefix 1#<br>
>> h323-gateway voip bind srcaddr 172.26.130.2<br>
>> service-policy input MARKQoSOUT<br>
>><br>
>> !<br>
>> interface Serial0/1/0:15<br>
>> no ip address<br>
>> encapsulation hdlc<br>
>> isdn switch-type primary-qsig<br>
>> isdn overlap-receiving<br>
>> isdn incoming-voice voice<br>
>> isdn contiguous-bchan<br>
>> no cdp enable<br>
>> !<br>
>> voice-port 0/1/0:15<br>
>> cptone BR<br>
>> !<br>
>> dial-peer voice 5 pots<br>
>> description Internal Extensions to the PBX<br>
>> destination-pattern 3396....<br>
>> direct-inward-dial<br>
>> port 0/1/0:15<br>
>> forward-digits 4<br>
>> no register e164<br>
>> !<br>
>> dial-peer voice 13 voip<br>
>> description Output dial-peer<br>
>> destination-pattern 3.......<br>
>> session target ras<br>
>> voice-class codec 1<br>
>> !<br>
>> !<br>
>> gateway<br>
>> !<br>
>> !<br>
>> !<br>
>> gatekeeper<br>
>> shutdown<br>
>><br>
>> Guilherme Loch Góes<br>
>><br>
>> _______________________________________________<br>
>> cisco-voip mailing list<br>
>> <a href="mailto:cisco-voip@puck.nether.net">cisco-voip@puck.nether.net</a><br>
>> <a href="https://puck.nether.net/mailman/listinfo/cisco-voip" target="_blank">https://puck.nether.net/mailman/listinfo/cisco-voip</a><br>
><br>
><br>
<br>
_______________________________________________<br>
cisco-voip mailing list<br>
<a href="mailto:cisco-voip@puck.nether.net">cisco-voip@puck.nether.net</a><br>
<a href="https://puck.nether.net/mailman/listinfo/cisco-voip" target="_blank">https://puck.nether.net/mailman/listinfo/cisco-voip</a><br>
</div></div></blockquote></div><br></div>