<html><head><style type='text/css'>p { margin: 0; }</style></head><body><div style='font-family: Verdana; font-size: 10pt; color: #000000'>Hello,<br>I have a CME and Asterisk PBX which i want to connect to a CUBE. <br>The CUBE will be the interconnect to my ITSP.<br><br>Currently I get issues with registering both PBX's to the CUBE.<br>Can somebody assist?<br><br>regards, Marty<br><span><br></span><br>----- Oorspronkelijk bericht -----<br>Van: "Bill Riley" <bill@hitechconnection.net><br>Aan: "Nick Matthews" <matthnick@gmail.com><br>Cc: "cisco-voip" <cisco-voip@puck.nether.net><br>Verzonden: Maandag 13 september 2010 02:00:57<br>Onderwerp: Re: [cisco-voip] CME to CUBE config<br><br>
<style>
<!--
/* Font Definitions */
@font-face
{font-family:Calibri;
panose-1:2 15 5 2 2 2 4 3 2 4;}
@font-face
{font-family:Tahoma;
panose-1:2 11 6 4 3 5 4 4 2 4;}
/* Style Definitions */
p.MsoNormal, li.MsoNormal, div.MsoNormal
{margin:0in;
margin-bottom:.0001pt;
font-size:12.0pt;
font-family:"Times New Roman","serif";}
a:link, span.MsoHyperlink
{mso-style-priority:99;
color:blue;
text-decoration:underline;}
a:visited, span.MsoHyperlinkFollowed
{mso-style-priority:99;
color:purple;
text-decoration:underline;}
p
{mso-style-priority:99;
mso-margin-top-alt:auto;
margin-right:0in;
mso-margin-bottom-alt:auto;
margin-left:0in;
font-size:12.0pt;
font-family:"Times New Roman","serif";}
span.EmailStyle18
{mso-style-type:personal-reply;
font-family:"Calibri","sans-serif";
color:#1F497D;}
.MsoChpDefault
{mso-style-type:export-only;}
@page WordSection1
{size:8.5in 11.0in;
margin:1.0in 1.0in 1.0in 1.0in;}
div.WordSection1
{page:WordSection1;}
-->
</style>
<!--[if gte mso 9]><xml>
<o:shapedefaults v:ext="edit" spidmax="1026" />
</xml><![endif]--><!--[if gte mso 9]><xml>
<o:shapelayout v:ext="edit">
<o:idmap v:ext="edit" data="1" />
</o:shapelayout></xml><![endif]-->
<div class="WordSection1">
<p class="MsoNormal"><span style="font-size: 11pt; font-family: "Calibri","sans-serif"; color: rgb(31, 73, 125);">Correct. I think we are all on the same page. If both call legs
are VOIP then you need a CUBE or IP-IP GW license. If one end of the call is POTS
and the other is VOIP, including a SIP dial-peer to a CUCM SIP trunk, then you
don’t need a CUBE license. If you are getting your PSTN connectivity from a
SIP Trunk then both ends are VOIP and you need the CUBE License. </span></p>
<p class="MsoNormal"><span style="font-size: 11pt; font-family: "Calibri","sans-serif"; color: rgb(31, 73, 125);"> </span></p>
<div style="border-style: solid none none; border-color: rgb(181, 196, 223) -moz-use-text-color -moz-use-text-color; border-width: 1pt medium medium; padding: 3pt 0in 0in;">
<p class="MsoNormal"><b><span style="font-size: 10pt; font-family: "Tahoma","sans-serif";">From:</span></b><span style="font-size: 10pt; font-family: "Tahoma","sans-serif";"> matthn@gmail.com
[mailto:matthn@gmail.com] <b>On Behalf Of </b>Nick Matthews<br>
<b>Sent:</b> Sunday, September 12, 2010 5:20 PM<br>
<b>To:</b> Bill Riley<br>
<b>Cc:</b> James Buchanan; cisco-voip<br>
<b>Subject:</b> Re: [cisco-voip] CME to CUBE config</span></p>
</div>
<p class="MsoNormal"> </p>
<p class="MsoNormal" style="margin-bottom: 12pt;">This is more of a terminology
thing. When I refer to a SIP trunk I was referring to a SIP
provider. Using a SIP gateway (TDM-SIP) doesn't require a license.
SIP is tricky business :)<br>
<br>
If you want to have an exact definition it's something more-or-less like
this: A CUBE is a router that is doing IP-IP between systems. This
can be a mixture of H.323, SIP, and SCCP. Any time you do that, you need
a CUBE license. The exception is something like two CMEs networked
together with a CUE involved, where you do actually use H.323-SIP or
SIP-SIP. The reason I include SCCP in the list of protocols for CUBE is
for the CME case, where you're doing SCCP-SIP. Even then, if you are
doing something like a SCCP controlled FXS port with CUCM using SIP to a
gateway, you wouldn't need a CUBE license. This is why I used a 'basic
guideline' in my original post, because it's often misconceived because of
these details.<br>
<br>
-nick</p>
<div>
<p class="MsoNormal">On Sun, Sep 12, 2010 at 5:32 PM, Bill Riley <<a href="mailto:bill@hitechconnection.net" target="_blank">bill@hitechconnection.net</a>>
wrote:</p>
<div>
<div>
<p class="MsoNormal" style=""><span style="font-size: 11pt; color: rgb(31, 73, 125);">I don’t think you need a cube license if
you are setting your dial-peer to use SIP and have it terminate on CUCM. If you
are getting the original calling leg from a TDM interface and sending it via
SIP to CUCM I don’t think you need the CUBE license. IT is only if both call
legs on the router come in as VOIP, as long as one is a POTS leg you are fine. </span></p>
<p class="MsoNormal" style=""><span style="font-size: 11pt; color: rgb(31, 73, 125);"> </span></p>
<p class="MsoNormal" style=""><span style="font-size: 11pt; color: rgb(31, 73, 125);"> </span></p>
<div style="border-style: solid none none; border-color: -moz-use-text-color; border-width: 1pt medium medium; padding: 3pt 0in 0in;">
<p class="MsoNormal" style=""><b><span style="font-size: 10pt;">From:</span></b><span style="font-size: 10pt;"> <a href="mailto:cisco-voip-bounces@puck.nether.net" target="_blank">cisco-voip-bounces@puck.nether.net</a>
[mailto:<a href="mailto:cisco-voip-bounces@puck.nether.net" target="_blank">cisco-voip-bounces@puck.nether.net</a>]
<b>On Behalf Of </b>Nick Matthews<br>
<b>Sent:</b> Sunday, September 12, 2010 3:54 PM<br>
<b>To:</b> James Buchanan</span></p>
<div>
<div>
<p class="MsoNormal"><span style="font-size: 10pt;"><br>
<b>Cc:</b> cisco-voip<br>
<b>Subject:</b> Re: [cisco-voip] CME to CUBE config</span></p>
</div>
</div>
</div>
<div>
<div>
<p class="MsoNormal" style=""> </p>
<p class="MsoNormal" style="margin-bottom: 12pt;">Some of
this is true, some not.<br>
<br>
Basic guideline - any time you have a SIP trunk you need a CUBE. This
includes CME, CUCM, CUCM-SME, etc.<br>
<br>
Any time you have a CUBE (CME, 2800/3800, 2900/3900, ASR) you need licensing.<br>
<br>
The licensing is not enforced on any platform, but there are plans. CUSP
is licensed and enforced however.<br>
<br>
-nick</p>
<div>
<p class="MsoNormal" style="">2010/9/12
James Buchanan <<a href="mailto:jbuchanan@ctiusa.com" target="_blank">jbuchanan@ctiusa.com</a>></p>
<div>
<div>
<p class="MsoNormal" style=""><span style="font-size: 11pt; color: rgb(31, 73, 125);">That’s not the case. CME even with the
2900s has the license needed to do SIP trunks to the PSTN.</span></p>
<p class="MsoNormal" style=""><span style="font-size: 11pt; color: rgb(31, 73, 125);"> </span></p>
<p class="MsoNormal" style=""><b><span style="font-size: 7pt; color: rgb(127, 127, 127);">James Buchanan </span></b><span style="font-size: 7pt; color: rgb(126, 126, 126);">|</span><b><span style="font-size: 7pt; color: rgb(127, 127, 127);"> Senior Network Engineer </span></b><span style="font-size: 7pt; color: rgb(126, 126, 126);">|</span><span style="font-size: 7pt; color: rgb(127, 127, 127);"> <b>South
Region </b></span><span style="font-size: 7pt; color: rgb(126, 126, 126);">|</span><b><span style="font-size: 7pt; color: rgb(127, 127, 127);"> Presidio Networked Solutions <br>
12 Cadillac Dr, Suite 130, Brentwood, TN 37027 </span></b><span style="font-size: 7pt; color: rgb(126, 126, 126);">|</span><b><span style="font-size: 7pt; color: rgb(127, 127, 127);"> </span></b><b><span style="font-size: 7pt; color: rgb(126, 126, 126);"><a href="mailto:jbuchanan@ctiusa.com" target="_blank">jbuchanan@presidio.com</a><br>
</span></b><b><span style="font-size: 7pt; color: rgb(127, 127, 127);">D: 615-866-5729</span></b><span style="font-size: 7pt; color: rgb(127, 127, 127);"> </span><span style="font-size: 7pt; color: rgb(126, 126, 126);">| <b>F:</b> </span><b><span style="font-size: 7pt; color: rgb(127, 127, 127);">615-866-5781</span></b><span style="font-size: 7pt; color: rgb(127, 127, 127);"> | </span><b><span style="font-size: 7pt; color: rgb(126, 126, 126);"><a href="http://www.presidio.com" target="_blank">www.presidio.com</a></span></b><span style="font-size: 7pt; color: rgb(31, 73, 125);"> <</span><b><span style="font-size: 7pt; color: rgb(126, 126, 126);"><a href="http://www.presidio.com" target="_blank">http://www.presidio.com</a></span></b><span style="font-size: 7pt; color: rgb(31, 73, 125);">> </span></p>
<p class="MsoNormal" style="margin-bottom: 12pt;"><b><span style="font-size: 7pt; color: rgb(127, 127, 127);">CCIE #25863, Voice</span></b></p>
<p class="MsoNormal" style=""><span style="font-size: 11pt; color: rgb(31, 73, 125);"> </span></p>
<p class="MsoNormal" style=""><b><span style="font-size: 10pt;">From:</span></b><span style="font-size: 10pt;"> <a href="mailto:cisco-voip-bounces@puck.nether.net" target="_blank">cisco-voip-bounces@puck.nether.net</a>
[mailto:<a href="mailto:cisco-voip-bounces@puck.nether.net" target="_blank">cisco-voip-bounces@puck.nether.net</a>]
<b>On Behalf Of </b>Gregory Wenzel<br>
<b>Sent:</b> Sunday, September 12, 2010 2:40 PM<br>
<b>To:</b> Barış Gülten<br>
<b>Cc:</b> cisco-voip<br>
<b>Subject:</b> Re: [cisco-voip] CME to CUBE config</span></p>
<div>
<div>
<p class="MsoNormal" style=""> </p>
<p>2800 series.this is true....2900/3900 series need cube license is:
expensive. I think we quoted 75 sip sessions cost $6,000.00</p>
<p>On Sep 10, 2010 8:14 AM, "Barış Gülten" <<a href="mailto:barisgulten@gmail.com" target="_blank">barisgulten@gmail.com</a>>
wrote:<br>
> Hi, CME not need CUBE license, CME can do outside sip trunk.<br>
> <br>
> Here is the example. <br>
> <br>
> <br>
> <br>
> Voice service voip <br>
> <br>
> address-hiding<br>
> <br>
> allow-connections h323 to h323<br>
> <br>
> allow-connections h323 to sip<br>
> <br>
> allow-connections sip to h323<br>
> <br>
> allow-connections sip to sip<br>
> <br>
> supplementary-service h450.12<br>
> <br>
> h323<br>
> <br>
> sip<br>
> <br>
> bind control source-interface Loopback0<br>
> <br>
> bind media source-interface Loopback0<br>
> <br>
> registrar server expires max 3600 min 3600<br>
> <br>
> !<br>
> <br>
> voice class codec 1<br>
> <br>
> codec preference 1 g729r8<br>
> <br>
> !<br>
> <br>
> <br>
> <br>
> interface Loopback0<br>
> <br>
> ip address xx.xx.xx.xx 255.255.255.252 /real ip<br>
> <br>
> !<br>
> <br>
> <br>
> <br>
> dial-peer voice 90 voip<br>
> <br>
> corlist outgoing call-international<br>
> <br>
> preference 1<br>
> <br>
> destination-pattern 00T<br>
> <br>
> voice-class codec 1<br>
> <br>
> session protocol sipv2<br>
> <br>
> session target ipv4:62.244.205.100<br>
> <br>
> dtmf-relay rtp-nte<br>
> <br>
> clid network-number 0232xxxxxxx<br>
> <br>
> !<br>
> <br>
> <br>
> <br>
> Best regards, Baris.<br>
> <br>
> <br>
> <br>
> From: <a href="mailto:cisco-voip-bounces@puck.nether.net" target="_blank">cisco-voip-bounces@puck.nether.net</a>
[mailto:<a href="mailto:cisco-voip-bounces@puck.nether.net" target="_blank">cisco-voip-bounces@puck.nether.net</a>]
On Behalf Of Marty van de Veerdonk<br>
> Sent: Friday, September 10, 2010 1:08 PM<br>
> To: cisco-voip<br>
> Subject: [cisco-voip] CME to CUBE config<br>
> <br>
> <br>
> <br>
> Hello,<br>
> can somebody help me with a (example) config for a CME <-> CUBE
setup?<br>
> <br>
> Many thanks!<br>
> <br>
> regards, Marty<br>
> </p>
</div>
</div>
</div>
</div>
<p class="MsoNormal" style="margin-bottom: 12pt;"><br>
_______________________________________________<br>
cisco-voip mailing list<br>
<a href="mailto:cisco-voip@puck.nether.net" target="_blank">cisco-voip@puck.nether.net</a><br>
<a href="https://puck.nether.net/mailman/listinfo/cisco-voip" target="_blank">https://puck.nether.net/mailman/listinfo/cisco-voip</a></p>
</div>
<p class="MsoNormal" style=""> </p>
</div>
</div>
</div>
</div>
</div>
<p class="MsoNormal"> </p>
</div>
<br>_______________________________________________<br>cisco-voip mailing list<br>cisco-voip@puck.nether.net<br>https://puck.nether.net/mailman/listinfo/cisco-voip<br></div></body></html>