<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2//EN">
<HTML>
<HEAD>
<META HTTP-EQUIV="Content-Type" CONTENT="text/html; charset=iso-8859-1">
<META NAME="Generator" CONTENT="MS Exchange Server version 6.5.7654.12">
<TITLE>RE: [cisco-voip] Outbound calls failing after IOS upgrade</TITLE>
</HEAD>
<BODY>
<!-- Converted from text/plain format -->
<BR>
<P><FONT SIZE=2>I think Chris suggestion should work. I think you know this but its just a suggestion. If you are doing telnet dont forget to put terminal Monitor. and then put debug. It often happens to me. :-). Check the traces to see what exaCtly happening .<BR>
<BR>
<BR>
Warm Regards,<BR>
Venkata Sasanka.pathi(-91 950 265 2290)<BR>
Consultant | unified communications<BR>
Locuz Enterprise Solutions Ltd. (A Subsidiary of 3i-Infotech)<BR>
(office:914066115512)<BR>
sasanka.pathi@locuz.com<BR>
www.locuz.com<BR>
<BR>
<BR>
<BR>
<BR>
-----Original Message-----<BR>
From: Sechaba Mokoena [<A HREF="mailto:sechabam@gmail.com">mailto:sechabam@gmail.com</A>]<BR>
Sent: Tue 9/21/2010 20:05<BR>
To: Venkata Sasanka Pathi<BR>
Cc: cisco-voip@puck.nether.net<BR>
Subject: Re: [cisco-voip] Outbound calls failing after IOS upgrade<BR>
<BR>
Hi Venkata,<BR>
<BR>
I ran a debug isdn q931 initially and I didn't see any call coming into the<BR>
router. I haven't tried removing the gateway from call manager yet, I'll try<BR>
that. I received a fast busy signal when my call failed. Thanks for the<BR>
info.<BR>
<BR>
Kind regards,<BR>
<BR>
Sechaba Mokoena<BR>
<BR>
On Mon, Sep 20, 2010 at 11:11 AM, sashank <sasanka.pathi@locuz.com> wrote:<BR>
<BR>
> Check the following:<BR>
><BR>
><BR>
><BR>
> Debug voip dialpeer<BR>
><BR>
><BR>
><BR>
> Do this to check any call coming from the call manager to the gateway. If<BR>
> the call is coming in then we have something to do with the gateway. Remove<BR>
> the gateway on the CUCM and add the gateway once again. What are u getting<BR>
> when you are calling a number. Is it a fast busy signal or some error.<BR>
><BR>
><BR>
><BR>
> Warm Regards,<BR>
><BR>
><BR>
><BR>
> Venkata Sasanka.pathi(-91 950 265 2290)<BR>
><BR>
> Consultant | unified communications<BR>
><BR>
> Locuz Enterprise Solutions Ltd. (A Subsidiary of 3i-Infotech)<BR>
><BR>
> (office:914066115656)<BR>
><BR>
> sasanka.pathi@locuz.com<BR>
><BR>
> www.locuz.com<BR>
><BR>
><BR>
><BR>
> *From:* cisco-voip-bounces@puck.nether.net [mailto:<BR>
> cisco-voip-bounces@puck.nether.net] *On Behalf Of *Sechaba Mokoena<BR>
> *Sent:* Saturday, September 18, 2010 8:14 PM<BR>
> *To:* cisco-voip@puck.nether.net<BR>
> *Subject:* [cisco-voip] Outbound calls failing after IOS upgrade<BR>
><BR>
><BR>
><BR>
> Hi,<BR>
><BR>
> I recently upgraded my router to c2900-universalk9_npe-mz.SPA.151-2.T1.bin<BR>
> to support SRST 8.0. I upgraded so my 6921 phones would be supported in<BR>
> SRST. After upgrading I couldn't place any outbound calls, but I could<BR>
> receive calls. Using the CSIM start command from the router, I can dial any<BR>
> external number. Can anyone help here, according to prior IOS release notes,<BR>
> this issue should've been resolved.<BR>
><BR>
> Kind regards,<BR>
><BR>
> Sechaba Mokoena<BR>
><BR>
<BR>
</FONT>
</P>
</BODY>
</HTML>