How you configure the FXO on gateway? what equipment you have, need some more info<br><br>Regards,<br><br>Saboor<br><br><div class="gmail_quote">On Thu, Sep 23, 2010 at 9:50 AM, Louis Koekemoer (ZA) <span dir="ltr"><<a href="mailto:Louis.Koekemoer@za.didata.com">Louis.Koekemoer@za.didata.com</a>></span> wrote:<br>
<blockquote class="gmail_quote" style="margin: 0pt 0pt 0pt 0.8ex; border-left: 1px solid rgb(204, 204, 204); padding-left: 1ex;">
<div link="blue" vlink="purple" lang="EN-US">
<div>
<p class="MsoNormal">Hi all,</p>
<p class="MsoNormal"> </p>
<p class="MsoNormal">In Kiev, Ukraine.</p>
<p class="MsoNormal"> </p>
<p class="MsoNormal">I have 4 analogue lines connected on a 4 port FXO card. When
connected to the Siemens PABX, all lines can call anywhere. When I connect the
lines one by one to the same port on the gateway with the same configuration, I
have only 1 line being able to make only local calls. I plug those lines 1 by
one on an analog phone, with the setting to pulse, then all of them can also
call anywhere. It does not make sense that I use the same port for testing via
the CCM, and only 1 can dial and only local.</p>
<p class="MsoNormal"> </p>
<p class="MsoNormal">Any advice.</p>
<p class="MsoNormal"><span lang="EN-ZA"> </span></p>
<p class="MsoNormal"><span lang="EN-ZA">Regards</span></p>
<p class="MsoNormal"><span lang="EN-ZA"> </span></p>
<p class="MsoNormal"><b><span lang="EN-ZA">Louis Koekemoer</span></b><span lang="EN-ZA"></span></p>
</div>
<p>This email and all contents are subject to the following disclaimer:</p>
<p>"<a href="http://www.dimensiondata.com/emaildisclaimer" target="_blank">http://www.dimensiondata.com/emaildisclaimer</a>"</p>
</div>
<br>_______________________________________________<br>
cisco-voip mailing list<br>
<a href="mailto:cisco-voip@puck.nether.net">cisco-voip@puck.nether.net</a><br>
<a href="https://puck.nether.net/mailman/listinfo/cisco-voip" target="_blank">https://puck.nether.net/mailman/listinfo/cisco-voip</a><br>
<br></blockquote></div><br>