<html><head><style type='text/css'>p { margin: 0; }</style></head><body><div style='font-family: Verdana; font-size: 10pt; color: #000000'>So here's my scenario:<br><ul><li>3845/3945 router with two or more PRIs</li><li>PRIs are in MGCP mode using "ccm-manager config" to download configs</li><li>router acts as SRST so MGCP gateways go into H323 fall back</li></ul><span>I had tried configuring trunk groups to use with the dial peers so i wouldn't have to duplicate them for each PRI. This worked until the second SRST trigger. So the behaviour was this:<br></span><ul><li>configure trunk group membership on serial interface as instructed by TAC</li><li>configure dial peers to point to trunk group</li><li>trigger SRST, make calls, calls work</li><li>revert back to normal operation</li><li>router downloads MGCP config from CallManager, effectively wiping out the trunk group membership on serial interfaces</li><li>trigger SRST, make calls, calls fail because there are no trunk group members</li></ul>How are others handling this scenario, i.e. you are using MGCP with "ccm-manager config" command and SRST and trunk groups?<br><br>Why wouldn't CCM allow for a trunk group membership command? I even checked on version 7.1 and there's nothing there. :(<br><br><span id="7cfbb40c-a4b1-4204-bd00-d872375142d4"><span name="x"></span>---<br>Lelio Fulgenzi, B.A.<br>Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1<br>(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)<br>^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^<br>Cooking with unix is easy. You just sed it and forget it. <br> - LFJ (with apologies to Mr. Popeil)<br><span name="x"></span><br></span><br></div></body></html>