<font size=2 face="sans-serif">Ratko,</font>
<br>
<br><font size=2 face="sans-serif">Remove all your pots dialpeers and put
this in there. i have found that </font><tt><font size=2> forward-digits
all</font></tt><font size=2 face="sans-serif"> command sends all digits
including the 0 to get the line out.</font>
<br>
<br><font size=2 face="sans-serif">! </font>
<br><font size=2 face="sans-serif">dial-peer voice 200 pots</font>
<br><font size=2 face="sans-serif"> destination-pattern 0T</font>
<br><font size=2 face="sans-serif"> direct-inward-dial</font>
<br><tt><font size=2>port 0/0/0:15</font></tt>
<br><font size=2 face="sans-serif">!</font>
<br>
<br>
<br><font size=2 face="sans-serif">Also don't forget the clocking </font>
<br>
<br><font size=2 face="sans-serif">network-clock-select 1 E1 0/0/0</font>
<br>
<br><font size=2 face="sans-serif">Debug voice dialpeer all may help seeing
if there is a match on the dialpeer.</font>
<br>
<br>
<br><font size=2 face="Verdana">Regards,<br>
<b><br>
John Van Laecke </b></font><font size=2 color=#5f5f5f face="Verdana"><b><br>
Network Administrator </b></font><font size=1 color=#5f5f5f face="Verdana"><b><br>
</b></font><font size=2 color=#0060a0 face="Verdana"><b><br>
GHD</b></font><font size=1 color=#0060a0 face="Verdana"><b>
</b></font><font size=1 face="Verdana"><b>Accomplish </b></font><font size=1 color=#0060a0 face="Verdana"><b>More</b></font><font size=1 face="Verdana"><b>
Together</b></font><font size=1 color=#5f5f5f face="Verdana"><br>
T: 61 7 3316 4456 | M:0427 015 232 | V: 414456 | E: John.vanlaecke@ghd.com</font><font size=1 color=#808080 face="Verdana"><br>
</font><font size=1 color=#808080 face="Arial">Level 2, 201 Charlotte Street
QLD AUSTRALIA</font><font size=1 color=#808080 face="Verdana"> | </font><a href=http://www.ghd.com.au/_><font size=1 color=#808080 face="Verdana"><u>www.ghd.com.au</u></font></a>
<p><a href=http://www.ghd.com/sectors/water/><font size=1 color=#0060a0 face="Verdana"><u>Water</u></font></a><font size=1 color=#0060a0 face="Verdana">
| </font><a href="http://www.ghd.com/global/sectors/energy--resources/"><font size=1 color=#0060a0 face="Verdana"><u>Energy
& Resources</u></font></a><font size=1 color=#0060a0 face="Verdana">
| </font><a href=http://www.ghd.com/sectors/environment/><font size=1 color=#0060a0 face="Verdana"><u>Environment</u></font></a><font size=1 color=#0060a0 face="Verdana">
| </font><a href="http://www.ghd.com/global/sectors/property--buildings/"><font size=1 color=#0060a0 face="Verdana"><u>Property
& Buildings</u></font></a><font size=1 color=#0060a0 face="Verdana">
| </font><a href=http://www.ghd.com/global/sectors/transportation/><font size=1 color=#0060a0 face="Verdana"><u>Transportation</u></font></a><font size=1 color=#0060a0 face="Verdana"><br>
</font><font size=1 color=#008000 face="Verdana"><br>
Please consider the environment before printing this email</font><font size=1 face="Verdana">
</font>
<br>
<br>
<br>
<table width=100%>
<tr valign=top>
<td><font size=1 color=#5f5f5f face="sans-serif">From:</font>
<td><font size=1 face="sans-serif">Ratko Dodevski <rade239@gmail.com></font>
<tr valign=top>
<td><font size=1 color=#5f5f5f face="sans-serif">To:</font>
<td><font size=1 face="sans-serif">Tim Smith <smithsonianwa@gmail.com></font>
<tr>
<td valign=top><font size=1 color=#5f5f5f face="sans-serif">Cc:</font>
<td><font size=1 face="sans-serif">cisco-voip@puck.nether.net</font>
<tr valign=top>
<td><font size=1 color=#5f5f5f face="sans-serif">Date:</font>
<td><font size=1 face="sans-serif">14/10/2010 07:24 AM</font>
<tr valign=top>
<td><font size=1 color=#5f5f5f face="sans-serif">Subject:</font>
<td><font size=1 face="sans-serif">Re: [cisco-voip] Avaya IP Office 500
and Cisco VG</font>
<tr valign=top>
<td><font size=1 color=#5f5f5f face="sans-serif">Sent by:</font>
<td><font size=1 face="sans-serif">cisco-voip-bounces@puck.nether.net</font></table>
<br>
<hr noshade>
<br>
<br>
<br><tt><font size=2>Hi guys, so this is the thing now...I have incoming
calls working<br>
fine, outgoing calls are bit strange...when I pick up the phone and<br>
dial 0 to make outside call I need to wait for 5 sec before dialing<br>
the number. I've noticed that when I dial 0 I don't get any call setup<br>
messages on the router or bringing up the interface. In those 5 sec<br>
whatever I send to the router it get's it but it doesn't process the<br>
call, but everything after 5 sec is processed as a call and handled<br>
fine. I'm sending you the running configuration so please if anyone<br>
can help, I'll appreciate it much.<br>
<br>
Router(config-if)#do sh run<br>
Building configuration...<br>
<br>
<br>
Current configuration : 4935 bytes<br>
!<br>
! Last configuration change at 12:50:36 UTC Wed Oct 13 2010<br>
!<br>
version 15.0<br>
service timestamps debug datetime msec<br>
service timestamps log datetime msec<br>
no service password-encryption<br>
!<br>
hostname Router<br>
!<br>
boot-start-marker<br>
boot-end-marker<br>
!<br>
card type e1 0 0<br>
enable secret xxxxxxxxxxx<br>
!<br>
no aaa new-model<br>
network-clock-participate wic 0<br>
!<br>
dot11 syslog<br>
ip source-route<br>
!<br>
!<br>
ip cef<br>
!<br>
!<br>
no ip domain lookup<br>
no ipv6 cef<br>
multilink bundle-name authenticated<br>
!<br>
!<br>
!<br>
!<br>
isdn switch-type primary-net5<br>
!<br>
!<br>
!<br>
voice service voip<br>
allow-connections h323 to h323<br>
allow-connections h323 to sip<br>
allow-connections sip to h323<br>
allow-connections sip to sip<br>
h323<br>
modem passthrough nse codec g711ulaw<br>
sip<br>
!<br>
voice class codec 1<br>
codec preference 1 g711ulaw<br>
codec preference 2 g711alaw<br>
codec preference 3 g729br8<br>
codec preference 4 g729r8<br>
!<br>
!<br>
!<br>
!<br>
voice-card 0<br>
dsp services dspfarm<br>
!<br>
!<br>
!<br>
!<br>
!<br>
license udi pid CISCO2811 sn FCZ104170CH<br>
archive<br>
log config<br>
hidekeys<br>
!<br>
!<br>
controller E1 0/0/0<br>
clock source internal<br>
pri-group timeslots 1-16<br>
!<br>
controller E1 0/0/1<br>
!<br>
!<br>
!<br>
!<br>
!<br>
!<br>
interface FastEthernet0/0<br>
no ip address<br>
shutdown<br>
duplex auto<br>
speed auto<br>
!<br>
interface FastEthernet0/1<br>
ip address dhcp<br>
duplex auto<br>
speed auto<br>
!<br>
interface Serial0/0/0:15<br>
no ip address<br>
encapsulation hdlc<br>
isdn switch-type primary-net5<br>
isdn protocol-emulate network<br>
isdn incoming-voice voice<br>
no cdp enable<br>
!<br>
ip forward-protocol nd<br>
no ip http server<br>
no ip http secure-server<br>
!<br>
!<br>
ip route 0.0.0.0 0.0.0.0 192.168.100.1<br>
!<br>
!<br>
!<br>
!<br>
control-plane<br>
!<br>
!<br>
voice-port 0/0/0:15<br>
cptone DE<br>
timeouts interdigit 3<br>
bearer-cap Speech<br>
!<br>
!<br>
!<br>
!<br>
dial-peer voice 23 voip<br>
destination-pattern .T<br>
session protocol sipv2<br>
session target ipv4:xxx.xxx.xxx.xxx:5060<br>
incoming called-number 38922602012<br>
voice-class codec 1<br>
dtmf-relay rtp-nte<br>
!<br>
dial-peer voice 24 voip<br>
destination-pattern .T<br>
session protocol sipv2<br>
session target ipv4:xxx.xxx.xxx.xxx:5060<br>
incoming called-number 38922602014<br>
voice-class codec 1<br>
dtmf-relay rtp-nte<br>
!<br>
dial-peer voice 25 voip<br>
destination-pattern .T<br>
session protocol sipv2<br>
session target ipv4:xxx.xxx.xxx.xxx:5060<br>
incoming called-number 38922602302<br>
voice-class codec 1<br>
dtmf-relay rtp-nte<br>
!<br>
dial-peer voice 26 voip<br>
destination-pattern .T<br>
session protocol sipv2<br>
session target ipv4:xxx.xxx.xxx.xxx:5060<br>
incoming called-number 38922602032<br>
voice-class codec 1<br>
dtmf-relay rtp-nte<br>
!<br>
dial-peer voice 27 voip<br>
destination-pattern .T<br>
session protocol sipv2<br>
session target ipv4:xxx.xxx.xxx.xxx:5060<br>
incoming called-number 38922602042<br>
voice-class codec 1<br>
dtmf-relay rtp-nte<br>
!<br>
dial-peer voice 28 voip<br>
destination-pattern .T<br>
session protocol sipv2<br>
session target ipv4:xxx.xxx.xxx.xxx:5060<br>
incoming called-number 38922602602<br>
voice-class codec 1<br>
dtmf-relay rtp-nte<br>
!<br>
dial-peer voice 29 voip<br>
destination-pattern .T<br>
session protocol sipv2<br>
session target ipv4:xxx.xxx.xxx.xxx:5060<br>
incoming called-number 38922602702<br>
voice-class codec 1<br>
dtmf-relay rtp-nte<br>
!<br>
dial-peer voice 30 voip<br>
destination-pattern .T<br>
session protocol sipv2<br>
session target ipv4:xxx.xxx.xxx.xxx:5060<br>
incoming called-number 38922602072<br>
voice-class codec 1<br>
dtmf-relay rtp-nte<br>
!<br>
dial-peer voice 31 voip<br>
destination-pattern .T<br>
session protocol sipv2<br>
session target ipv4:xxx.xxx.xxx.xxx:5060<br>
incoming called-number 38922602802<br>
voice-class codec 1<br>
dtmf-relay rtp-nte<br>
!<br>
dial-peer voice 32 voip<br>
destination-pattern .T<br>
session protocol sipv2<br>
session target ipv4:xxx.xxx.xxx.xxx:5060<br>
incoming called-number 38922602902<br>
voice-class codec 1<br>
dtmf-relay rtp-nte<br>
!<br>
dial-peer voice 2 pots<br>
destination-pattern 38922602014<br>
port 0/0/0:15<br>
forward-digits all<br>
!<br>
dial-peer voice 3 pots<br>
destination-pattern 38922602012<br>
port 0/0/0:15<br>
forward-digits all<br>
!<br>
dial-peer voice 4 pots<br>
destination-pattern 38922602302<br>
port 0/0/0:15<br>
forward-digits all<br>
!<br>
dial-peer voice 5 pots<br>
destination-pattern 38922602032<br>
port 0/0/0:15<br>
forward-digits all<br>
!<br>
dial-peer voice 6 pots<br>
destination-pattern 38922602042<br>
port 0/0/0:15<br>
forward-digits all<br>
!<br>
dial-peer voice 7 pots<br>
destination-pattern 38922602602<br>
port 0/0/0:15<br>
forward-digits all<br>
!<br>
dial-peer voice 8 pots<br>
destination-pattern 38922602702<br>
port 0/0/0:15<br>
forward-digits all<br>
!<br>
dial-peer voice 9 pots<br>
destination-pattern 38922602072<br>
port 0/0/0:15<br>
forward-digits all<br>
!<br>
dial-peer voice 10 pots<br>
destination-pattern 38922602802<br>
port 0/0/0:15<br>
forward-digits all<br>
!<br>
dial-peer voice 11 pots<br>
destination-pattern 38922602902<br>
port 0/0/0:15<br>
forward-digits all<br>
_______________________________________________<br>
cisco-voip mailing list<br>
cisco-voip@puck.nether.net<br>
</font></tt><a href="https://puck.nether.net/mailman/listinfo/cisco-voip"><tt><font size=2>https://puck.nether.net/mailman/listinfo/cisco-voip</font></tt></a><tt><font size=2><br>
<br>
_____________________ <br>
This e-mail has been scanned for viruses by MessageLabs.<br>
</font></tt>
<br>
<BR>
_____________________ <BR>
This email and all attachments are confidential. For further important information about emails sent to or from GHD or if you have received this email in error, please refer to http://www.ghd.com/emaildisclaimer.html .<BR>
_____________________ <BR>
This e-mail has been scanned for viruses by MessageLabs.<BR>