<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META content=text/html;charset=iso-8859-1 http-equiv=Content-Type>
<META name=GENERATOR content="MSHTML 8.00.6001.18702"></HEAD>
<BODY style="PADDING-LEFT: 10px; PADDING-RIGHT: 10px; PADDING-TOP: 15px"
id=MailContainerBody leftMargin=0 topMargin=0 CanvasTabStop="true"
name="Compose message area">
<DIV><FONT color=#0000ff face=Calibri>Hello All,</FONT></DIV>
<DIV><FONT color=#0000ff face=Calibri>I am facing a strange problem with FAX on
ATA. I have CME on 2851.</FONT></DIV>
<DIV><FONT color=#0000ff face=Calibri>I have SIP inbound from Telco.
</FONT></DIV>
<DIV><FONT color=#0000ff face=Calibri>My dial peer for incoming calls from
Telco.</FONT></DIV>
<DIV><FONT face=Calibri></FONT> </DIV>
<DIV><FONT face=Calibri>dial-peer voice 444 voip<BR> description
***FAX***<BR> destination-pattern 2871023<BR> modem passthrough
nse codec g711alaw<BR> session target
ipv4:192.168.12.22
<STRONG>(ATA IP)</STRONG><BR> fax rate disable<BR> no
vad</FONT></DIV>
<DIV><FONT face=Calibri></FONT> </DIV>
<DIV><FONT face=Calibri>voice service voip <BR> allow-connections h323 to
h323<BR> allow-connections h323 to sip<BR> allow-connections sip to
h323<BR> allow-connections sip to sip<BR> fax protocol t38
ls-redundancy 0 hs-redundancy 0 fallback none<BR> modem passthrough nse
codec g711alaw</FONT></DIV>
<DIV><FONT face=Calibri></FONT> </DIV>
<DIV><FONT face=Calibri>My ATA is h.323 end point.</FONT></DIV>
<DIV><FONT face=Calibri>Attached is the screenshot of ATA</FONT></DIV>
<DIV><FONT face=Calibri>Connect Mode 0x90000404</FONT></DIV>
<DIV><FONT face=Calibri>Audio Mode is 0x00000015</FONT></DIV>
<DIV><FONT face=Calibri></FONT> </DIV>
<DIV><FONT color=#0000ff face=Calibri><STRONG>The Problem is I can send FAX from
ATA without a problem. But receiving FAX or Phone call on ATA is the
problem.</STRONG></FONT></DIV>
<DIV><FONT color=#0000ff face=Calibri><STRONG>I saw the call history it shows as
call is coming from g.729. But I don’t have this codec any where. I feel due to
this reason </STRONG></FONT></DIV>
<DIV><FONT color=#0000ff face=Calibri><STRONG>am not able to receive. For
outgoing from ATA I see both call legs on g.711alaw.</STRONG></FONT></DIV>
<DIV><FONT face=Calibri></FONT> </DIV>
<DIV><FONT face=Calibri>3131 : 124936 1097223000ms.10593 +2440 +19250 pid:3232
Originate 6745831<BR> dur 00:00:16 tx:831/132960 rx:841/134560 10
(normal call clearing (16))<BR> IP 10.302.1.5:26862 SRTP: off rtt:0ms
pl:0/0ms lost:0/0/0 delay:0/0/0ms <STRONG>g711alaw</STRONG> TextRelay:
off<BR> media inactive detected:n media contrl rcvd:n/a
timestamp:n/a<BR> long duration call detected:n long dur callduration :n/a
timestamp:n/a</FONT></DIV>
<DIV> </DIV>
<DIV><FONT face=Calibri>2CAD : 124950 1097333830ms.10594 +-1 +46910 pid:444
Originate <STRONG>2871023</STRONG><BR> dur 00:00:00 tx:0/0 rx:0/0 10
(normal call clearing (16))<BR> IP 0.0.0.0:0 SRTP: off rtt:0ms pl:0/0ms
lost:0/0/0 delay:0/0/0ms <STRONG>g729r8 pre-ietf</STRONG> TextRelay:
off<BR> media inactive detected:n media contrl rcvd:n/a
timestamp:n/a<BR> long duration call detected:n long dur callduration :n/a
timestamp:n/a</FONT></DIV>
<DIV><FONT face=Calibri></FONT> </DIV>
<DIV><FONT color=#0000ff face=Calibri>Any ideas please.</FONT></DIV>
<DIV><FONT color=#0000ff face=Calibri></FONT> </DIV>
<DIV><FONT color=#0000ff face=Calibri>Aali</FONT></DIV>
<DIV><FONT face=Calibri></FONT> </DIV></BODY></HTML>