<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2//EN">
<HTML>
<HEAD>
<META HTTP-EQUIV="Content-Type" CONTENT="text/html; charset=iso-8859-1">
<META NAME="Generator" CONTENT="MS Exchange Server version 6.5.7654.12">
<TITLE>RE: [cisco-voip] RSPAN for call recording</TITLE>
</HEAD>
<BODY>
<!-- Converted from text/plain format -->
<BR>
<P><FONT SIZE=2>Hi,<BR>
<BR>
<BR>
Also make sure you span your CUCM and UCCX. Which will provide SCCP related messages for resolving the number to IP Address.<BR>
Warm Regards,<BR>
Venkata Sasanka.pathi(-91 950 265 2290)<BR>
Consultant | unified communications<BR>
Locuz Enterprise Solutions Ltd. (A Subsidiary of 3i-Infotech)<BR>
(office:914066115512)<BR>
sasanka.pathi@locuz.com<BR>
www.locuz.com<BR>
<BR>
<BR>
<BR>
<BR>
-----Original Message-----<BR>
From: cisco-voip-bounces@puck.nether.net on behalf of Buchanan, James<BR>
Sent: Tue 11/2/2010 19:19<BR>
To: rab boon; cisco-voip@puck.nether.net<BR>
Subject: Re: [cisco-voip] RSPAN for call recording<BR>
<BR>
That's the essence of it .<BR>
<BR>
<BR>
1. Create a new VLAN on the switches.<BR>
<BR>
2. Put in the command under the vlan "remote-span" (or something like that).<BR>
<BR>
3. Create a monitor session like this: monitor session 1 source vlan vlanid then monitor session 1 destination remote vlan vlanid (where vlan id is the vlan id you used)<BR>
<BR>
4. Trunk the vlan to the switch that has the recorder connected.<BR>
<BR>
5. Create a monitor session like this: monitor session 1 source vlan vlanid (where vlan id is the remote span vlan ID) then monitor session 1 destination interface gi0/0 (or whatever physical interface you're using).<BR>
<BR>
James Buchanan | Technology Manager, UC | South Region | Presidio Networked Solutions<BR>
12 Cadillac Dr, Suite 130, Brentwood, TN 37027 | jbuchanan@presidio.com<<A HREF="mailto:jbuchanan@ctiusa.com">mailto:jbuchanan@ctiusa.com</A>><BR>
D: 615-866-5729 | F: 615-866-5781 | www.presidio.com<<A HREF="http://www.presidio.com/">http://www.presidio.com/</A>><BR>
CCIE #25863, Voice<BR>
<BR>
<BR>
From: cisco-voip-bounces@puck.nether.net [<A HREF="mailto:cisco-voip-bounces@puck.nether.net">mailto:cisco-voip-bounces@puck.nether.net</A>] On Behalf Of rab boon<BR>
Sent: Tuesday, November 02, 2010 7:33 AM<BR>
To: cisco-voip@puck.nether.net<BR>
Subject: [cisco-voip] RSPAN for call recording<BR>
<BR>
I've been tasked with setting up call recording for the first time and need some assistance.<BR>
<BR>
We have 2 access layer switches which have a seperate voice VLAN configured. How do I go about creating a SPAN to the core switch which has the Call Recording server connected to?<BR>
<BR>
Do I create a new call recording VLAN on the core switch, trunk it to the access layer switches and create RSPAN sessions on each access layer switch?<BR>
<BR>
Some advice on best practice would be really appreciated.<BR>
<BR>
</FONT>
</P>
</BODY>
</HTML>