<div>To dispel a few rumors:</div><div><br></div><div>1. The order of CUCM nodes listed on UC (or Unity) does not need to match the callmanger group of the device pool the ports are in. UC/Unity will happily register to whatever server it has listed first as long as it is a valid/active server. You might want to match the order for the sake of consistency, but there is no technical need to.</div>
<div><br></div><div>2. IP addresses of CUCM nodes can be updated without deleting anything. Port Group -> Edit -> Servers.</div><div><br></div><div>3. The application server entry is not required for the ports to register / take calls, that is primarily used for AXL integrations. </div>
<div><br></div><div>For the actual problem of port registrations, here is what I usually recommend checking out:</div><div><br></div><div>a. Device names - CUCM automatically adds the "-VI<port>" suffix to the port names, but UC does not, this often leads to mis-configs. Ensure the device name prefix defined on the port group page exactly matches CUCM and ends in "-VI".</div>
<div><br></div><div>b. Servers can ping each other and don't have traffic being ACL'd / traversing a firewall</div><div><br></div><div>c. Port security - the security mode for each port in UC should (unless otherwise desired) be set to "non-secure", the device security mode for each port in CUCM should be "non secure voice mail port".</div>
<div><br></div><div>d. The CUCM nodes listed under the port group on UC - ensure each is listed by IP address, the skinny port has not been modified from port 2000, the TLS port is 2443, and the server type is listed as CUCM (not CUCME). Also verify that each of these CUCM nodes has the callmanager service activated and running (are other phones registered to it, can you telnet to port 2000, etc).</div>
<div><br></div><div>e. For new installs where we have the luxury, reboot everything :-)</div><div><br></div><div>If all of that checks out, you've pretty well checked everything you can config wise (at least as far as is necessary for port registration) and would be well justified in opening a TAC case. If you want to pursue it yourself, the next step would likely be gathering traces from UC (MiuSkinny) and/or CUCM (detailed ccm). You could also try your luck with a packet capture filtered on the IP addresses of the servers involved. </div>
<div><br></div><div>-Pat</div><div><br><br><div class="gmail_quote">On Tue, Jan 25, 2011 at 2:20 PM, Lelio Fulgenzi <span dir="ltr"><<a href="mailto:lelio@uoguelph.ca" target="_blank">lelio@uoguelph.ca</a>></span> wrote:<br>
<blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">
<div><div style="font-family:Verdana;font-size:10pt;color:#000000">That's what I used to create them. I don't think I have to recreate them. Let's hope not. ;)<div><span><br><br><span name="x"></span>---<br>
Lelio Fulgenzi, B.A.<br>Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1<br>(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)<br>^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^<br>
Cooking with unix is easy. You just sed it and forget it. <br> - LFJ (with apologies to Mr. Popeil)<br><span name="x"></span><br></span><br><hr><b>From: </b>"ccieid1ot" <<a href="mailto:ccieid1ot@gmail.com" target="_blank">ccieid1ot@gmail.com</a>><br>
<b>To: </b>"Lelio Fulgenzi" <<a href="mailto:lelio@uoguelph.ca" target="_blank">lelio@uoguelph.ca</a>><br></div><b>Cc: </b><a href="mailto:cisco-voip@puck.nether.net" target="_blank">cisco-voip@puck.nether.net</a><br>
<b>Sent: </b>Tuesday, January 25, 2011 2:12:57 PM<div><div></div><div><br><b>Subject: </b>Re: [cisco-voip] can't get Unity Connection 7.1.3ES11 to register to CUCM v7.1.5b(SU2)<br><br>Try removing and adding the VM ports through the CCM VM wizards.<br>
<br><div class="gmail_quote">On Tue, Jan 25, 2011 at 1:00 PM, Lelio Fulgenzi <span dir="ltr"><<a href="mailto:lelio@uoguelph.ca" target="_blank">lelio@uoguelph.ca</a>></span> wrote:<br>
<blockquote class="gmail_quote" style="margin:0pt 0pt 0pt 0.8ex;border-left:1px solid rgb(204, 204, 204);padding-left:1ex"><div><div style="font-family:Verdana;font-size:10pt;color:rgb(0, 0, 0)">tried my <span>admin account. didn't work. :(<div>
<br><br><span></span>---<br>Lelio Fulgenzi, B.A.<br>Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1<br>(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)<br>^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^<br>
Cooking with unix is easy. You just sed it and forget it. <br> - LFJ (with apologies to Mr. Popeil)<br><span></span><br></div></span><div><br><hr><b>From: </b>"ccieid1ot" <<a href="mailto:ccieid1ot@gmail.com" target="_blank">ccieid1ot@gmail.com</a>><br>
<b>To: </b>"Lelio Fulgenzi" <<a href="mailto:lelio@uoguelph.ca" target="_blank">lelio@uoguelph.ca</a>><br></div><b>Sent: </b>Tuesday, January 25, 2011 1:54:10 PM<div><div></div><div><br><b>Subject: </b>Re: [cisco-voip] can't get Unity Connection 7.1.3ES11 to register to CUCM v7.1.5b(SU2)<br>
<br>Oh, just the ccmadministrator is fine.<br><br><div class="gmail_quote">On Tue, Jan 25, 2011 at 12:53 PM, Lelio Fulgenzi <span dir="ltr"><<a href="mailto:lelio@uoguelph.ca" target="_blank">lelio@uoguelph.ca</a>></span> wrote:<br>
<blockquote class="gmail_quote" style="margin:0pt 0pt 0pt 0.8ex;border-left:1px solid rgb(204, 204, 204);padding-left:1ex">
<div><div style="font-family:Verdana;font-size:10pt;color:rgb(0, 0, 0)">In CUCM v7: <br><br>system > application server > add<br><br>I select Unity Connection and there are required fields, name, ip address and the application user.<div>
<br><br><br><img src="http://?ui=2&ik=0bec47aa63&view=att&th=12dbe9f8b87bf7d0&attid=0.0.1.1&disp=emb&zw"><br><span><br><span></span>---<br>Lelio Fulgenzi, B.A.<br>Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1<br>
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)<br>^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^<br>Cooking with unix is easy. You just sed it and forget it. <br> - LFJ (with apologies to Mr. Popeil)<br>
<span></span><br></span><br><hr><b>From: </b>"ccieid1ot" <<a href="mailto:ccieid1ot@gmail.com" target="_blank">ccieid1ot@gmail.com</a>><br><b>To: </b>"Lelio Fulgenzi" <<a href="mailto:lelio@uoguelph.ca" target="_blank">lelio@uoguelph.ca</a>><br>
<b>Cc: </b>"davidytk" <<a href="mailto:davidytk@netvigator.com" target="_blank">davidytk@netvigator.com</a>>, <a href="mailto:cisco-voip@puck.nether.net" target="_blank">cisco-voip@puck.nether.net</a><br>
</div>
<b>Sent: </b>Tuesday, January 25, 2011 1:47:25 PM<div><div></div><div><br><b>Subject: </b>Re: [cisco-voip] can't get Unity Connection 7.1.3ES11 to register to CUCM v7.1.5b(SU2)<br><br>Not following on which userID?<br>
<br><div class="gmail_quote">On Tue, Jan 25, 2011 at 12:44 PM, Lelio Fulgenzi <span dir="ltr"><<a href="mailto:lelio@uoguelph.ca" target="_blank">lelio@uoguelph.ca</a>></span> wrote:<br><blockquote class="gmail_quote" style="margin:0pt 0pt 0pt 0.8ex;border-left:1px solid rgb(204, 204, 204);padding-left:1ex">
<div><div style="font-family:Verdana;font-size:10pt;color:rgb(0, 0, 0)">which userID did you select?<div><span><br><br><span></span>---<br>Lelio Fulgenzi, B.A.<br>Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1<br>
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)<br>^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^<br>Cooking with unix is easy. You just sed it and forget it. <br> - LFJ (with apologies to Mr. Popeil)<br>
<span></span><br></span><br><hr><b>From: </b>"ccieid1ot" <<a href="mailto:ccieid1ot@gmail.com" target="_blank">ccieid1ot@gmail.com</a>><br><b>To: </b>"Lelio Fulgenzi" <<a href="mailto:lelio@uoguelph.ca" target="_blank">lelio@uoguelph.ca</a>><br>
<b>Cc: </b>"davidytk" <<a href="mailto:davidytk@netvigator.com" target="_blank">davidytk@netvigator.com</a>>, <a href="mailto:cisco-voip@puck.nether.net" target="_blank">cisco-voip@puck.nether.net</a><br>
</div>
<b>Sent: </b>Tuesday, January 25, 2011 1:42:35 PM<div><div></div><div><br><b>Subject: </b>Re: [cisco-voip] can't get Unity Connection 7.1.3ES11 to register to CUCM v7.1.5b(SU2)<br><br>Yes, it's needed. I couldn't get vm ports to register with the wrong IP of UC server. ;)<br>
<br><div class="gmail_quote">On Tue, Jan 25, 2011 at 12:36 PM, Lelio Fulgenzi <span dir="ltr"><<a href="mailto:lelio@uoguelph.ca" target="_blank">lelio@uoguelph.ca</a>></span> wrote:<br>
<blockquote class="gmail_quote" style="margin:0pt 0pt 0pt 0.8ex;border-left:1px solid rgb(204, 204, 204);padding-left:1ex"><div><div style="font-family:Verdana;font-size:10pt;color:rgb(0, 0, 0)">Is this really necessary for simple integration? I thought something like this was needed for visual voicemail or something like that. I mean, I can try it, just wondering is all.<div>
<br><br><span><br><span></span>---<br>Lelio Fulgenzi, B.A.<br>Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1<br>(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)<br>^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^<br>
Cooking with unix is easy. You just sed it and forget it. <br> - LFJ (with apologies to Mr. Popeil)<br><span></span><br></span><br><hr></div><b>From: </b>"ccieid1ot" <<a href="mailto:ccieid1ot@gmail.com" target="_blank">ccieid1ot@gmail.com</a>><div>
<br><b>To: </b>"Lelio Fulgenzi" <<a href="mailto:lelio@uoguelph.ca" target="_blank">lelio@uoguelph.ca</a>><br></div><b>Cc: </b>"davidytk" <<a href="mailto:davidytk@netvigator.com" target="_blank">davidytk@netvigator.com</a>>, <a href="mailto:cisco-voip@puck.nether.net" target="_blank">cisco-voip@puck.nether.net</a><br>
<b>Sent: </b>Tuesday, January 25, 2011 1:27:11 PM<div><div></div><div><br><b>Subject: </b>Re: [cisco-voip] can't get Unity Connection 7.1.3ES11 to register to CUCM v7.1.5b(SU2)<br><br>Did you add the UC in CUCM under application server?<br>
<br><div class="gmail_quote">On Mon, Jan 24, 2011 at 10:16 AM, Lelio Fulgenzi <span dir="ltr"><<a href="mailto:lelio@uoguelph.ca" target="_blank">lelio@uoguelph.ca</a>></span> wrote:<br>
<blockquote class="gmail_quote" style="margin:0pt 0pt 0pt 0.8ex;border-left:1px solid rgb(204, 204, 204);padding-left:1ex"><div><div style="font-family:Verdana;font-size:10pt;color:rgb(0, 0, 0)">*phew*<br><br>
this has got to be the best support line I've ever read on CCO.<br><br><div style="margin-left:40px"><hr style="width:100%;min-height:2px"><b>Supported Version Combinations for Cisco Unity Connection and Cisco Unified Communications Manager</b><br style="font-weight:bold">
<br>Cisco Unity Connection 2.x and Later<br><br><span style="font-weight:bold;font-style:italic">Any </span>version of Cisco Unity Connection 2.x or later is supported for use with <span style="font-weight:bold;font-style:italic">any </span>version of Cisco Unified CM 4.1(3) or later. <br>
<br><br>from: <br>
<br>
<a href="http://www.cisco.com/en/US/customer/docs/voice_ip_comm/connection/compatibility/matrix/cucsccpmtx.html" target="_blank">http://www.cisco.com/en/US/customer/docs/voice_ip_comm/connection/compatibility/matrix/cucsccpmtx.html</a><br>
<hr style="width:100%;min-height:2px"></div><div><span><br><span></span>---<br>Lelio Fulgenzi, B.A.<br>Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1<br>(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)<br>
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^<br>Cooking with unix is easy. You just sed it and forget it. <br> - LFJ (with apologies to Mr. Popeil)<br><span></span><br>
</span><br><hr><b>From: </b>"Lelio Fulgenzi" <<a href="mailto:lelio@uoguelph.ca" target="_blank">lelio@uoguelph.ca</a>><br></div><b>To: </b>"davidytk" <<a href="mailto:davidytk@netvigator.com" target="_blank">davidytk@netvigator.com</a>><div>
<br><b>Cc: </b><a href="mailto:cisco-voip@puck.nether.net" target="_blank">cisco-voip@puck.nether.net</a><br></div><b>Sent: </b>Monday, January 24, 2011 11:12:21 AM<div><div></div><div><br><b>Subject: </b>Re: [cisco-voip] can't get Unity Connection 7.1.3ES11 to register to CUCM v7.1.5b(SU2)<br>
<br><div style="font-family:Verdana;font-size:10pt;color:rgb(0, 0, 0)">Yeah, that's my next thing to check. I've always seen pretty good compatibility across versions since it's SCCP and not CTI, but you never know. If that's the case, we'll have a bit of trouble on our hands. ugh.<span><br>
<br><span></span>---<br>Lelio Fulgenzi, B.A.<br>Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1<br>(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)<br>^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^<br>
Cooking with unix is easy. You just sed it and forget it. <br> - LFJ (with apologies to Mr. Popeil)<br><span></span><br></span><br><hr><b>From: </b>"davidytk" <<a href="mailto:davidytk@netvigator.com" target="_blank">davidytk@netvigator.com</a>><br>
<b>To: </b>"Lelio Fulgenzi" <<a href="mailto:lelio@uoguelph.ca" target="_blank">lelio@uoguelph.ca</a>>, "Mac GroupStudy" <<a href="mailto:mac.groupstudy@gmail.com" target="_blank">mac.groupstudy@gmail.com</a>><br>
<b>Cc: </b><a href="mailto:cisco-voip@puck.nether.net" target="_blank">cisco-voip@puck.nether.net</a><br><b>Sent: </b>Monday, January 24, 2011 11:03:35 AM<br><b>Subject: </b>RE: [cisco-voip] can't get Unity Connection 7.1.3ES11 to register to CUCM v7.1.5b(SU2)<br>
<br>
<div>
<p class="MsoNormal"><font color="navy" face="Arial" size="1"><span style="font-size:9pt;font-family:Arial;color:navy" lang="EN-US">Hi Lelio</span></font></p>
<p class="MsoNormal"><font color="navy" face="Arial" size="1"><span style="font-size:9pt;font-family:Arial;color:navy" lang="EN-US"> </span></font></p>
<p class="MsoNormal"><font color="navy" face="Arial" size="1"><span style="font-size:9pt;font-family:Arial;color:navy" lang="EN-US">Have you checked Cisco
website for different version for Unity Connection (7.1.3) with CUCM (7.1.5). Does
UC need to upgrade to 7.1.5 version also ?</span></font></p>
<p class="MsoNormal"><font color="navy" face="Arial" size="1"><span style="font-size:9pt;font-family:Arial;color:navy" lang="EN-US"> </span></font></p>
<p class="MsoNormal"><font color="navy" face="Arial" size="1"><span style="font-size:9pt;font-family:Arial;color:navy" lang="EN-US">Thanks</span></font></p>
<p class="MsoNormal"><font color="navy" face="Arial" size="1"><span style="font-size:9pt;font-family:Arial;color:navy" lang="EN-US">David</span></font></p>
<p class="MsoNormal"><font color="navy" face="Arial" size="1"><span style="font-size:9pt;font-family:Arial;color:navy" lang="EN-US"> </span></font></p>
<div>
<div class="MsoNormal" style="text-align:center" align="center"><font face="新細明體" size="3"><span style="font-size:12pt" lang="EN-US">
<hr align="center" width="100%" size="2">
</span></font></div>
<p class="MsoNormal"><b><font face="Tahoma" size="2"><span style="font-size:10pt;font-family:Tahoma;font-weight:bold" lang="EN-US">From:</span></font></b><font face="Tahoma" size="2"><span style="font-size:10pt;font-family:Tahoma" lang="EN-US">
<a href="mailto:cisco-voip-bounces@puck.nether.net" target="_blank">cisco-voip-bounces@puck.nether.net</a> [mailto:<a href="mailto:cisco-voip-bounces@puck.nether.net" target="_blank">cisco-voip-bounces@puck.nether.net</a>] <b><b>On Behalf Of </b></b>Lelio Fulgenzi<br>
<b><b>Sent:</b></b> Monday, January 24, 2011
11:57 PM<br>
<b><b>To:</b></b> Mac GroupStudy<br>
<b><b>Cc:</b></b> <a href="mailto:cisco-voip@puck.nether.net" target="_blank">cisco-voip@puck.nether.net</a><br>
<b><b>Subject:</b></b> Re: [cisco-voip] can't
get Unity Connection 7.1.3ES11 to register to CUCM v7.1.5b(SU2)</span></font><span lang="EN-US"></span></p>
</div>
<p class="MsoNormal"><font face="新細明體" size="3"><span style="font-size:12pt" lang="EN-US"> </span></font></p>
<div>
<p class="MsoNormal"><font color="black" face="Verdana" size="2"><span style="font-size:10pt;font-family:Verdana;color:black" lang="EN-US">Thanks again. I
modified the port group "server" settings appropriately. I still get
errors however:<br>
<br>
Failure reason: ErrorReceivedErrorFromSkinnySocket. ProcessData=>0x80045A00<br>
<br>
I did check the security settings and as far as I can tell, it's OK. Everything
is unsecured. Weird, I know the subs work cause I'm registering phones to them.<br>
<br>
I'll update once I find more.<br>
<span><br>
---<br>
Lelio Fulgenzi, B.A.<br>
Senior Analyst (CCS) * University of Guelph * Guelph,
Ontario N1G 2W1<br>
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)<br>
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^<br>
Cooking with unix is easy. You just sed it and forget it. <br>
- LFJ (with apologies to Mr. Popeil)<br>
<br>
<br>
</span></span></font></p>
<div class="MsoNormal" style="text-align:center" align="center"><font color="black" face="Verdana" size="2"><span style="font-size:10pt;font-family:Verdana;color:black" lang="EN-US">
<hr align="center" width="100%" size="2">
</span></font></div>
<p class="MsoNormal"><b><font color="black" face="Verdana" size="2"><span style="font-size:10pt;font-family:Verdana;color:black;font-weight:bold" lang="EN-US">From:
</span></font></b><font color="black" face="Verdana" size="2"><span style="font-size:10pt;font-family:Verdana;color:black" lang="EN-US">"Mac
GroupStudy" <<a href="mailto:mac.groupstudy@gmail.com" target="_blank">mac.groupstudy@gmail.com</a>><br>
<b><strong>To: </strong></b>"Lelio Fulgenzi"
<<a href="mailto:lelio@uoguelph.ca" target="_blank">lelio@uoguelph.ca</a>><br>
<b><span style="font-weight:bold">Cc: </span></b><a href="mailto:cisco-voip@puck.nether.net" target="_blank">cisco-voip@puck.nether.net</a><br>
<b><span style="font-weight:bold">Sent: </span></b>Monday, January 24, 2011
10:24:30 AM<br>
<b><span style="font-weight:bold">Subject: </span></b>Re: [cisco-voip] can't
get Unity Connection 7.1.3ES11 to register to CUCM v7.1.5b(SU2)<br>
<br>
On the IP address change question; I don't recall having to do that but it
certainly seems you should be able to. As I recall (again, I don't have one in
front of me) there is also an advanced port group settings under
"Edit" maybe?</span></font></p>
<div>
<p class="MsoNormal"><font color="black" face="Verdana" size="2"><span style="font-size:10pt;font-family:Verdana;color:black" lang="EN-US"> </span></font></p>
</div>
<div>
<p class="MsoNormal"><font color="black" face="Verdana" size="2"><span style="font-size:10pt;font-family:Verdana;color:black" lang="EN-US">On your registration
issue, no chance one side is set to secure and the other is not? The reason I
ask is I have seen DMA come up with some weird results based on what it should
have been.</span></font></p>
</div>
<div>
<p class="MsoNormal"><font color="black" face="Verdana" size="2"><span style="font-size:10pt;font-family:Verdana;color:black" lang="EN-US"> </span></font></p>
</div>
<div>
<p class="MsoNormal"><font color="black" face="Verdana" size="2"><span style="font-size:10pt;font-family:Verdana;color:black" lang="EN-US">>Mac</span></font></p>
</div>
<div>
<p class="MsoNormal"><font color="black" face="Verdana" size="2"><span style="font-size:10pt;font-family:Verdana;color:black" lang="EN-US"> </span></font></p>
</div>
<div>
<p class="MsoNormal" style="margin-bottom:12pt"><font color="black" face="Verdana" size="2"><span style="font-size:10pt;font-family:Verdana;color:black" lang="EN-US"> </span></font></p>
<div>
<p class="MsoNormal"><font color="black" face="Verdana" size="2"><span style="font-size:10pt;font-family:Verdana;color:black" lang="EN-US">On Mon, Jan 24, 2011
at 10:17 AM, Lelio Fulgenzi <<a href="mailto:lelio@uoguelph.ca" target="_blank">lelio@uoguelph.ca</a>> wrote:</span></font></p>
<div>
<div>
<p class="MsoNormal"><font color="black" face="Verdana" size="2"><span style="font-size:10pt;font-family:Verdana;color:black" lang="EN-US">ok, i lied, they are
passing the test on Connection but still not showing registered....<br>
<br>
hmmmmm</span></font></p>
<div>
<p class="MsoNormal" style="margin-bottom:12pt"><font color="black" face="Verdana" size="2"><span style="font-size:10pt;font-family:Verdana;color:black" lang="EN-US"><br>
<br>
---<br>
Lelio Fulgenzi, B.A.<br>
Senior Analyst (CCS) * University of Guelph * Guelph,
Ontario N1G 2W1<br>
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)<br>
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^<br>
Cooking with unix is easy. You just sed it and forget it. <br>
- LFJ (with apologies to Mr. Popeil)<br>
<br>
</span></font></p>
<div class="MsoNormal" style="text-align:center" align="center"><font color="black" face="Verdana" size="2"><span style="font-size:10pt;font-family:Verdana;color:black" lang="EN-US">
<hr align="center" width="100%" size="2">
</span></font></div>
</div>
<p class="MsoNormal"><b><font color="black" face="Verdana" size="2"><span style="font-size:10pt;font-family:Verdana;color:black;font-weight:bold" lang="EN-US">From:
</span></font></b><font color="black" face="Verdana" size="2"><span style="font-size:10pt;font-family:Verdana;color:black" lang="EN-US">"Lelio
Fulgenzi" <<a href="mailto:lelio@uoguelph.ca" target="_blank">lelio@uoguelph.ca</a>><br>
<b><span style="font-weight:bold">To: </span></b>"Mac GroupStudy"
<<a href="mailto:mac.groupstudy@gmail.com" target="_blank">mac.groupstudy@gmail.com</a>></span></font></p>
<div>
<p class="MsoNormal"><font color="black" face="Verdana" size="2"><span style="font-size:10pt;font-family:Verdana;color:black" lang="EN-US"><br>
<b><span style="font-weight:bold">Cc: </span></b><a href="mailto:cisco-voip@puck.nether.net" target="_blank">cisco-voip@puck.nether.net</a></span></font></p>
</div>
<p class="MsoNormal"><b><font color="black" face="Verdana" size="2"><span style="font-size:10pt;font-family:Verdana;color:black;font-weight:bold" lang="EN-US">Sent:
</span></font></b><font color="black" face="Verdana" size="2"><span style="font-size:10pt;font-family:Verdana;color:black" lang="EN-US">Monday, January 24,
2011 10:13:44 AM</span></font></p>
<div>
<div>
<p class="MsoNormal" style="margin-bottom:12pt"><font color="black" face="Verdana" size="2"><span style="font-size:10pt;font-family:Verdana;color:black" lang="EN-US"><br>
<b><span style="font-weight:bold">Subject: </span></b>Re: [cisco-voip] can't
get Unity Connection 7.1.3ES11 to register to CUCM v7.1.5b(SU2)</span></font></p>
<div>
<p class="MsoNormal" style="margin-bottom:12pt"><font color="black" face="Verdana" size="2"><span style="font-size:10pt;font-family:Verdana;color:black" lang="EN-US">Thanks, that has bitten me before (um, like five minutes before
;), but I fixed that.<br>
<br>
Turns out I used the publisher IP address instead of the subscriber's IP
address. Not sure why that would make a difference, but I'm guessing because it
was different than the list of subscribers in the device pool?<br>
<br>
Anyways, I got them to register now.<br>
<br>
I'm not sure I don't like the fact that I can't change the IP address of a port
group once created. At least in Unity 4 you could edit the integration.<br>
<br>
Is there a way to edit the IP address of a port group in Connection?<br>
<br>
---<br>
Lelio Fulgenzi, B.A.<br>
Senior Analyst (CCS) * University of Guelph * Guelph,
Ontario N1G 2W1<br>
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)<br>
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^<br>
Cooking with unix is easy. You just sed it and forget it. <br>
- LFJ (with apologies to Mr. Popeil)<br>
<br>
</span></font></p>
<div class="MsoNormal" style="text-align:center" align="center"><font color="black" face="Verdana" size="2"><span style="font-size:10pt;font-family:Verdana;color:black" lang="EN-US">
<hr align="center" width="100%" size="2">
</span></font></div>
<p class="MsoNormal"><b><font color="black" face="Verdana" size="2"><span style="font-size:10pt;font-family:Verdana;color:black;font-weight:bold" lang="EN-US">From:
</span></font></b><font color="black" face="Verdana" size="2"><span style="font-size:10pt;font-family:Verdana;color:black" lang="EN-US">"Mac
GroupStudy" <<a href="mailto:mac.groupstudy@gmail.com" target="_blank">mac.groupstudy@gmail.com</a>><br>
<b><span style="font-weight:bold">To: </span></b>"Lelio Fulgenzi"
<<a href="mailto:lelio@uoguelph.ca" target="_blank">lelio@uoguelph.ca</a>><br>
<b><span style="font-weight:bold">Cc: </span></b><a href="mailto:cisco-voip@puck.nether.net" target="_blank">cisco-voip@puck.nether.net</a><br>
<b><span style="font-weight:bold">Sent: </span></b>Monday, January 24, 2011
10:10:05 AM<br>
<b><span style="font-weight:bold">Subject: </span></b>Re: [cisco-voip] can't
get Unity Connection 7.1.3ES11 to register to CUCM v7.1.5b(SU2)<br>
<br>
This is something that you have probably looked at but I have seen it bite
people many, many times: The Port Name Prefix on the Unity side must only be
the name and not include the port number. It must also be identical to how it
is defined on the CUCM side. Again, I am sure you are well aware of this but
"I's" and "1's" and even "t's" run together some
times.</span></font></p>
<div>
<p class="MsoNormal"><font color="black" face="Verdana" size="2"><span style="font-size:10pt;font-family:Verdana;color:black" lang="EN-US"> </span></font></p>
</div>
<div>
<p class="MsoNormal"><font color="black" face="Verdana" size="2"><span style="font-size:10pt;font-family:Verdana;color:black" lang="EN-US">Ex. Pod1-UM1-VI1 as a
port name would be listed as a Port Prefix name on the UC side as Pod1-UM1-VI
(note the 1 is dropped).</span></font></p>
</div>
<p class="MsoNormal"><font color="black" face="Verdana" size="2"><span style="font-size:10pt;font-family:Verdana;color:black" lang="EN-US"> </span></font></p>
<div>
<p class="MsoNormal"><font color="black" face="Verdana" size="2"><span style="font-size:10pt;font-family:Verdana;color:black" lang="EN-US">On Mon, Jan 24, 2011
at 9:49 AM, Lelio Fulgenzi <<a href="mailto:lelio@uoguelph.ca" target="_blank">lelio@uoguelph.ca</a>> wrote:</span></font></p>
<div>
<div>
<p class="MsoNormal" style="margin-bottom:12pt"><font color="black" face="Verdana" size="2"><span style="font-size:10pt;font-family:Verdana;color:black" lang="EN-US">I'm having problems getting Unity Connection 7.1.3ES11 voice mail
ports to register to CUCM v7.1.5b(SU2). I've created the phone system, phone
port groups and added the ports and all looks good, but they don't show as
registered on the CallManager server. <br>
<br>
As background, I've imported a DMA from my 4.1(3) server into my 7.1.5b server,
so all the voice mail port names and extensions are the same. I don't see this
as being an issue though, since Connection is pointing at a different IP
address.<br>
<br>
The Unity Connection server and v7 CallManager server are on the same VLAN so
there should be no ACL issues at hand. I tried a few restarts but no luck.<br>
<br>
Ideas before I open a TAC case? This stuff has always been simple. <br>
<br>
---<br>
Lelio Fulgenzi, B.A.<br>
Senior Analyst (CCS) * University of Guelph * Guelph,
Ontario N1G 2W1<br>
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)<br>
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^<br>
Cooking with unix is easy. You just sed it and forget it. <br>
- LFJ (with apologies to Mr. Popeil)<br>
<br>
</span></font></p>
</div>
</div>
<p class="MsoNormal" style="margin-bottom:12pt"><font color="black" face="Verdana" size="2"><span style="font-size:10pt;font-family:Verdana;color:black" lang="EN-US"><br>
_______________________________________________<br>
cisco-voip mailing list<br>
<a href="mailto:cisco-voip@puck.nether.net" target="_blank">cisco-voip@puck.nether.net</a><br>
<a href="https://puck.nether.net/mailman/listinfo/cisco-voip" target="_blank">https://puck.nether.net/mailman/listinfo/cisco-voip</a></span></font></p>
</div>
<p class="MsoNormal"><font color="black" face="Verdana" size="2"><span style="font-size:10pt;font-family:Verdana;color:black" lang="EN-US"><br>
<br clear="all">
<br>
-- <br>
Charles S. Dye<br>
Contracts Officer<br>
InSync Training LLC<br>
(v) (860) 553-3521<br>
(m) (860) 303-2617<br>
(f) (775) 522-2740<br>
<a href="mailto:contracts@insynctraining.com" target="_blank">contracts@insynctraining.com</a></span></font></p>
<p class="MsoNormal"><font color="black" face="Verdana" size="2"><span style="font-size:10pt;font-family:Verdana;color:black" lang="EN-US"> </span></font></p>
</div>
<p class="MsoNormal"><font color="black" face="Verdana" size="2"><span style="font-size:10pt;font-family:Verdana;color:black" lang="EN-US"><br>
_______________________________________________<br>
cisco-voip mailing list<br>
<a href="mailto:cisco-voip@puck.nether.net" target="_blank">cisco-voip@puck.nether.net</a><br>
<a href="https://puck.nether.net/mailman/listinfo/cisco-voip" target="_blank">https://puck.nether.net/mailman/listinfo/cisco-voip</a></span></font></p>
</div>
</div>
</div>
</div>
</div>
<p class="MsoNormal"><font color="black" face="Verdana" size="2"><span style="font-size:10pt;font-family:Verdana;color:black" lang="EN-US"><br>
<br clear="all">
<br>
-- <br>
Charles S. Dye<br>
Contracts Officer<br>
InSync Training LLC<br>
(v) (860) 553-3521<br>
(m) (860) 303-2617<br>
(f) (775) 522-2740<br>
<a href="mailto:contracts@insynctraining.com" target="_blank">contracts@insynctraining.com</a></span></font></p>
<p class="MsoNormal"><font color="black" face="Verdana" size="2"><span style="font-size:10pt;font-family:Verdana;color:black" lang="EN-US"> </span></font></p>
</div>
</div>
<p class="MsoNormal"><font face="新細明體" size="3"><span style="font-size:12pt" lang="EN-US"><br>
<br>
__________ Information from ESET NOD32 Antivirus, version of virus signature
database 5813 (20110124) __________<br>
<br>
The message was checked by ESET NOD32 Antivirus.<br>
<br>
<a href="http://www.eset.com" target="_blank">http://www.eset.com</a></span></font></p>
</div>
<br><br>__________ Information from ESET NOD32 Antivirus, version of virus signature database 5813 (20110124) __________<br><br>The message was checked by ESET NOD32 Antivirus.<br><br><a href="http://www.eset.com" target="_blank">http://www.eset.com</a><br>
</div><br>_______________________________________________<br>cisco-voip mailing list<br><a href="mailto:cisco-voip@puck.nether.net" target="_blank">cisco-voip@puck.nether.net</a><br><a href="https://puck.nether.net/mailman/listinfo/cisco-voip" target="_blank">https://puck.nether.net/mailman/listinfo/cisco-voip</a><br>
</div></div></div></div><br>_______________________________________________<br>
cisco-voip mailing list<br>
<a href="mailto:cisco-voip@puck.nether.net" target="_blank">cisco-voip@puck.nether.net</a><br>
<a href="https://puck.nether.net/mailman/listinfo/cisco-voip" target="_blank">https://puck.nether.net/mailman/listinfo/cisco-voip</a><br>
<br></blockquote></div><br><br clear="all"><br>-- <br>duy<br>CCIE #27737 Voice<br><br>
</div></div></div></div></blockquote></div><br><br clear="all"><br>-- <br>duy<br>CCIE #27737 Voice<br><br>
</div></div></div></div></blockquote></div><br><br clear="all"><br>-- <br>duy<br>CCIE #27737 Voice<br><br>
</div></div></div></div></blockquote></div><br><br clear="all"><br>-- <br>duy<br>CCIE #27737 Voice<br><br>
</div></div></div></div></blockquote></div><br><br clear="all"><br>-- <br>duy<br>CCIE #27737 Voice<br><br>
</div></div></div></div><br>_______________________________________________<br>
cisco-voip mailing list<br>
<a href="mailto:cisco-voip@puck.nether.net" target="_blank">cisco-voip@puck.nether.net</a><br>
<a href="https://puck.nether.net/mailman/listinfo/cisco-voip" target="_blank">https://puck.nether.net/mailman/listinfo/cisco-voip</a><br>
<br></blockquote></div><br>
</div>