I should add one other thing - the SIP stack in IOS before 12.4(20)T is unreliable in my opinion.š I think there's a more than decent chance if you tried this on 12.4(20)T you may not see the issue.<br><br>-nick<br><br>
<div class="gmail_quote">2011/1/27 Nick Matthews <span dir="ltr"><<a href="mailto:matthnick@gmail.com">matthnick@gmail.com</a>></span><br><blockquote class="gmail_quote" style="margin: 0pt 0pt 0pt 0.8ex; border-left: 1px solid rgb(204, 204, 204); padding-left: 1ex;">
By default you should be receiving fast start.š There are a number of things that can happen to stop that media exchange from happening successfully.š Some people are fans of copying all types of progress indicator, rtp send-receive, and a metric ton of other commands that should be applied to routers everywhere because they found it on some document somewhere.š Those would be my first suspects.<br>

<br>The second suspect is to inspect the TCP stream that should be happening for the fast start.š Check to see if in the h225 debugs you're receiving a h245 port.š If not, you'll need to investigate cucme1.š If so, you need to figure out what's going on between the two routers, and if cucme2 is rejecting it for some reason.<br>

<br>A few things to clarify for reference - fast start should be on by default, and early offer forced only works for SIP-SIP.š <br><br>-nick<br><br><div class="gmail_quote">2011/1/27 Aleksey Qwerty <span dir="ltr"><<a href="mailto:russian.qwerty@gmail.com" target="_blank">russian.qwerty@gmail.com</a>></span><div>
<div></div><div class="h5"><br>
<blockquote class="gmail_quote" style="margin: 0pt 0pt 0pt 0.8ex; border-left: 1px solid rgb(204, 204, 204); padding-left: 1ex;">Thank you for the reply.<br><br>I'm not sure, in fact. But CUCME_1 config looks like:<br>

<br>voice class h323 1<br>šcall start fast<div><br>š<br>dial-peer voice 1 voip<br></div>šdescription To CUCME_2<br>švoice-class h323 1<br><br>
Please help.<br><br><div class="gmail_quote">26 ÑÎ×ÁÒÑ 2011šÇ. 18:57 ÐÏÌØÚÏ×ÁÔÅÌØ Peter Slow <span dir="ltr"><<a href="mailto:peter.slow@gmail.com" target="_blank">peter.slow@gmail.com</a>></span> ÎÁÐÉÓÁÌ:<div><div>

</div><div><br><blockquote class="gmail_quote" style="margin: 0pt 0pt 0pt 0.8ex; border-left: 1px solid rgb(204, 204, 204); padding-left: 1ex;">
Does make the H323 side use fast start work?<br>
<br>
-Peter<br>
<br>
2011/1/26 Aleksey Qwerty <<a href="mailto:russian.qwerty@gmail.com" target="_blank">russian.qwerty@gmail.com</a>>:<br>
<div><div></div><div>> Thank you for the response...but I pointed out chassis and IOS version on<br>
> purpose. The problem is there is no such function in a current IOS or in the<br>
> latest available IOS version for 3745 chassis.<br>
><br>
> <a href="http://www.cisco.com/en/US/docs/ios/voice/command/reference/vr_e1.html#wp1052977" target="_blank">http://www.cisco.com/en/US/docs/ios/voice/command/reference/vr_e1.html#wp1052977</a><br>
><br>
> "...Óommand was integrated into Cisco IOS Release 12.4(20)T."<br>
><br>
> Is there other way to change the situation?<br>
><br>
> Thank you in advance.<br>
><br>
> 2011/1/25 Peter Slow <<a href="mailto:peter.slow@gmail.com" target="_blank">peter.slow@gmail.com</a>><br>
>><br>
>> early-offer forced<br>
>><br>
>><br>
>> <a href="http://www.cisco.com/en/US/docs/ios/voice/cube/configuration/guide/vb-gw-sipsip.html#wp1445377" target="_blank">http://www.cisco.com/en/US/docs/ios/voice/cube/configuration/guide/vb-gw-sipsip.html#wp1445377</a><br>



>><br>
>> <a href="https://supportforums.cisco.com/thread/299654" target="_blank">https://supportforums.cisco.com/thread/299654</a><br>
>><br>
>> -Peter<br>
>><br>
>> On Tue, Jan 25, 2011 at 8:49 AM, Aleksey Qwerty<br>
>> <<a href="mailto:russian.qwerty@gmail.com" target="_blank">russian.qwerty@gmail.com</a>> wrote:<br>
>> > Dear all,<br>
>> ><br>
>> > I'm faced the problem with Cisco 3745, IOS Advanced IP Services<br>
>> > 12.4(15)T3,<br>
>> > CUCME 4.1(0).<br>
>> ><br>
>> > I have the following scheme:<br>
>> > Cisco IP Phone --SCCP--> CUCME_1 --H.323/G.729/alpha-numeric--> CUCME_2<br>
>> > --SIP/G.711ulaw/rtp-nte--> ITSP<br>
>> ><br>
>> > Calls from CUCM_2 to ITSP works just fine, instead of calls from CUCME_1<br>
>> > via<br>
>> > CUCME_2. Calls are not established at all. In debug ccsip messages I can<br>
>> > see<br>
>> > that there is no SDP in INVITE from CUCME_2 to ITSP.<br>
>> ><br>
>> > Here is config of CUCME_2:<br>
>> ><br>
>> > voice service voip<br>
>> > šallow-connections h323 to h323<br>
>> > šallow-connections h323 to sip<br>
>> > šallow-connections sip to h323<br>
>> > šallow-connections sip to sip<br>
>> > šno supplementary-service h450.3<br>
>> > šsupplementary-service h450.12<br>
>> > šredirect ip2ip<br>
>> > šfax protocol t38 ls-redundancy 5 hs-redundancy 2 fallback none<br>
>> > šh323<br>
>> > šsip<br>
>> ><br>
>> > sip-ua<br>
>> ><br>
>> > dial-peer voice 1 voip<br>
>> > šdescription To ITSP<br>
>> > štranslation-profile outgoing Cut9<br>
>> > šhuntstop<br>
>> > šdestination-pattern 9T<br>
>> > šsession protocol sipv2<br>
>> > šsession target ipv4:192.168.1.1<br>
>> > šsession transport udp<br>
>> > šdtmf-relay rtp-nte<br>
>> > šcodec g711alaw<br>
>> > šclid strip name<br>
>> > šclid network-number 111222333<br>
>> > šno vad<br>
>> ><br>
>> ><br>
>> > How can I get SDP (some capabilities information) in INVITE message from<br>
>> > CUCME_2?<br>
>> ><br>
>> > Thanks in advance.<br>
>> ><br>
>> > --<br>
>> > BR,<br>
>> > Aleksey Qwerty<br>
>> ><br>
>> ><br>
>> > _______________________________________________<br>
>> > cisco-voip mailing list<br>
>> > <a href="mailto:cisco-voip@puck.nether.net" target="_blank">cisco-voip@puck.nether.net</a><br>
>> > <a href="https://puck.nether.net/mailman/listinfo/cisco-voip" target="_blank">https://puck.nether.net/mailman/listinfo/cisco-voip</a><br>
>> ><br>
>> ><br>

><br>
> --<br>
> BR,<br>
> Aleksey Qwerty<br>
><br>
><br>
</div></div></blockquote></div></div></div><br>-- <br>BR,<br><font color="#888888">Aleksey Qwerty<br><br>
</font><br>_______________________________________________<br>
cisco-voip mailing list<br>
<a href="mailto:cisco-voip@puck.nether.net" target="_blank">cisco-voip@puck.nether.net</a><br>
<a href="https://puck.nether.net/mailman/listinfo/cisco-voip" target="_blank">https://puck.nether.net/mailman/listinfo/cisco-voip</a><br>
<br></blockquote></div></div></div><br>
</blockquote></div><br>