<HTML>
<HEAD>
<TITLE>Re: [cisco-voip] problem forwarding calls</TITLE>
</HEAD>
<BODY>
<FONT SIZE="4"><FONT FACE="Verdana, Helvetica, Arial"><SPAN STYLE='font-size:14.0px'><B>Andy,<BR>
What is the dial string you’re putting in the DN setup to forward to the external device? That will give some indication of what dial peer it will attempt to use on the router. Also, you might try logging into the router, doing a “debug isdn q931” and “term mon”. Then place a call to that extension and let it complete the process of forwarding to the cell phone. You should see a bunch of stuff run across the screen. Once the call is complete, hang up and do a “term no mon” and “undebug all”. If you want, copy the data from the screen and send it to me so I can look at it. Also, if you have the proper configuration in your router, you should be able to do a “show call history voice” and run all of that out as well. That will give a complete history of what went on on the gateway during all of your calls for the last several hours. Somewhere in there you’ll be able to see exactly what the gateway sent to the telco during that particular forward.<BR>
</B></SPAN></FONT></FONT><FONT FACE="Verdana, Helvetica, Arial"><B><FONT SIZE="2"><SPAN STYLE='font-size:10.0px'>-- <BR>
Jim Reed<BR>
Manager of Technical Services<BR>
and “de facto Sprint employee”<BR>
Swift Communications, Inc.<BR>
970-384-9141 (Direct)<BR>
775-772-7666 (Cell)<BR>
<BR>
Today’s Paraprosdokian:<BR>
I know the voices<BR>
in my head aren’t real.<BR>
But they do have some<BR>
really good ideas.<BR>
</SPAN></FONT></B><SPAN STYLE='font-size:12.0px'><BR>
<BR>
On 11/11/10 7:48 AM, "Andy Infante" <AInfante@APRecovery.Com> wrote:<BR>
<BR>
</SPAN></FONT><BLOCKQUOTE><FONT FACE="Verdana, Helvetica, Arial"><FONT SIZE="4"><SPAN STYLE='font-size:14.0px'>It’s going to the cell phone voicemail, not internal voicemail. Attached is our router config. This was created before I became admin here, and I’m not that familiar with the voice routing…so I don’t know exactly what to change.<BR>
<BR>
Andy<BR>
<BR>
<BR>
<BR>
<BR>
<BR>
</SPAN></FONT><SPAN STYLE='font-size:12.0px'><BR>
</SPAN><FONT SIZE="4"><SPAN STYLE='font-size:13.0px'><B>From:</B> Jim Reed [<FONT COLOR="#0000FF"><U><a href="mailto:jreed@swiftnews.com">mailto:jreed@swiftnews.com</a></U></FONT>] <BR>
<B>Sent:</B> Wednesday, November 10, 2010 6:11 PM<BR>
<B>To:</B> Andy Infante; <FONT COLOR="#0000FF"><U>cisco-voip@puck.nether.net<BR>
</U></FONT><B>Subject:</B> Re: [cisco-voip] problem forwarding calls<BR>
</SPAN></FONT><SPAN STYLE='font-size:12.0px'> <BR>
</SPAN><FONT SIZE="4"><SPAN STYLE='font-size:13.0px'><B>Andy,<BR>
When you say it goes to voicemail, is it going to the external device voicemail or your internal voicemail. One mistake that some of my fellow IT guys make when configuring a DN to forward externally is checking the box to the right of Forward All and then putting a number in the Coverage/Destination field. Those are two separate entities and once you put a check in the box to the right of Forward All, all calls are forwarded to internal voicemail. That probably isn’t what’s happening but I am trying to figure out what kind of dial sequence would be going out that would cause the call to go directly to the external devices voicemail instead of ringing that device.<BR>
</B></SPAN></FONT><B><FONT SIZE="1"><SPAN STYLE='font-size:9.0px'>-- <BR>
Jim Reed<BR>
Manager of Technical Services<BR>
and “de facto Sprint employee”<BR>
Swift Communications, Inc.<BR>
970-384-9141 (Direct)<BR>
775-772-7666 (Cell)<BR>
<BR>
Today’s Paraprosdokian:<BR>
I want to die peacefully in my sleep,<BR>
like my grandfather.<BR>
Not screaming and yelling<BR>
like the passengers in his car.<BR>
</SPAN></FONT></B><SPAN STYLE='font-size:12.0px'><BR>
<BR>
On 11/10/10 2:50 PM, "Andy Infante" <<FONT COLOR="#0000FF"><U>AInfante@APRecovery.Com</U></FONT>> wrote:<BR>
If we have a line forwarded to an external number outside of the organization, when an internal caller dials the 4 digit extension, they are forwarded to the external number’s voicemail instead of directly to the device (like a cell phone for example). Additionally, if the external number is an AT&T line, AT&T doesn’t even recognize the called id, and says it can’t even find the voicemail mailbox. Verizon gets the called number id can correctly goes to the right mailbox, but the cell phone never even rings. <BR>
<BR>
Is there a configuration on call manager (we are using 4.2 (3)) or the router that needs to be done for this to work properly?<BR>
<BR>
Thanks,<BR>
<BR>
Andy Infante
</SPAN></FONT>
<P ALIGN=CENTER>
<FONT FACE="Verdana, Helvetica, Arial"><SPAN STYLE='font-size:12.0px'>
</SPAN></FONT>
<P>
<FONT FACE="Verdana, Helvetica, Arial"><SPAN STYLE='font-size:12.0px'><BR>
</SPAN><FONT SIZE="1"><SPAN STYLE='font-size:9.0px'>IMPORTANT: This e-mail and any attachments may contain confidential, proprietary, and/or privileged information.<BR>
If you are not the intended recipient, please notify the sender immediately by return e-mail, delete this e-mail, and destroy any copies. Any dissemination, copying, retention, printing, or use of this information by a person other than the intended recipient is unauthorized and may be illegal. Any opinions expressed in this e-mail are those of the author and may not reflect the views of the company. The sender believes that this E-mail and any attachments were free of any virus, worm, Trojan horse, and/or malicious code when sent. This message and its attachments could have been infected during transmission. By reading the message and opening any attachments, the recipient accepts full responsibility for taking protective and remedial action about viruses and other defects. The sender's employer is not liable for any loss or damage arising in any way from this message or its attachments.<BR>
</SPAN></FONT><SPAN STYLE='font-size:12.0px'> <BR>
<BR>
<BR>
</SPAN></FONT><FONT COLOR="#808080"><FONT SIZE="2"><FONT FACE="Arial"><SPAN STYLE='font-size:10.0px'>IMPORTANT: This e-mail and any attachments may contain confidential, proprietary, and/or privileged information.<BR>
If you are not the intended recipient, please notify the sender immediately by return e-mail, delete this e-mail, and destroy any copies. Any dissemination, copying, retention, printing, or use of this information by a person other than the intended recipient is unauthorized and may be illegal. Any opinions expressed in this e-mail are those of the author and may not reflect the views of the company. The sender believes that this E-mail and any attachments were free of any virus, worm, Trojan horse, and/or malicious code when sent. This message and its attachments could have been infected during transmission. By reading the message and opening any attachments, the recipient accepts full responsibility for taking protective and remedial action about viruses and other defects. The sender's employer is not liable for any loss or damage arising in any way from this message or its attachments.<BR>
</SPAN></FONT></FONT></FONT><FONT FACE="Verdana, Helvetica, Arial"><SPAN STYLE='font-size:12.0px'><BR>
</SPAN></FONT></BLOCKQUOTE><FONT FACE="Verdana, Helvetica, Arial"><SPAN STYLE='font-size:12.0px'><BR>
<BR>
</SPAN></FONT>
</BODY>
</HTML>