What feature set are you running? IP BASE? I thought you needed at least IP plus? Maybe i'm wrong.<div><br></div><div>Scott<br><br><div class="gmail_quote">On Fri, Sep 2, 2011 at 12:35 PM, Joseph Mays <span dir="ltr"><<a href="mailto:mays@win.net">mays@win.net</a>></span> wrote:<br>
<blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex;"><u></u>
<div>
<div><font size="2" face="Arial">Well, this sort of thing keeps happening. Now, I'm
working on a Cisco 7206 running c7200-is-mz.123-22.bin. The feature navigator is
quite clear that qos and autoqos-voip are supported on this router.</font></div>
<div><font size="2" face="Arial"></font> </div>
<div><font size="2" face="Arial">Go to global config, enter "mls qos" to enable qos
-- invalid input at global config.</font></div>
<div><font size="2" face="Arial"></font> </div>
<div><font size="2" face="Arial">==========</font></div>
<div><font size="2" face="Courier New">gw1.armplc#show ver<br>Cisco Internetwork
Operating System Software<br>IOS (tm) 7200 Software (C7200-IS-M), Version
12.3(22), RELEASE SOFTWARE (fc2)<br>Technical Support: </font><a href="http://www.cisco.com/techsupport" target="_blank"><font size="2" face="Courier New">http://www.cisco.com/techsupport</font></a><br><font size="2" face="Courier New">Copyright (c) 1986-2007 by cisco Systems, Inc.<br>
Compiled
Wed 24-Jan-07 20:17 by ccai<br>Image text-base: 0x60008AF4, data-base:
0x61D44000</font></div>
<div><font size="2" face="Courier New"></font> </div>
<div><font size="2" face="Courier New">ROM: System Bootstrap, Version
12.1(20000710:044039) [nlaw-121E_npeb 117], DEVELOPMENT SOFTWARE<br>BOOTLDR:
7200 Software (C7200-IS-M), Version 12.3(22), RELEASE SOFTWARE
(fc2)</font></div>
<div><font size="2" face="Courier New"></font> </div>
<div><font size="2" face="Courier New">gw1.armplc uptime is 3 weeks, 2 days, 13
hours, 42 minutes<br>System returned to ROM by power-on<br>System image file is
"slot0:c7200-is-mz.123-22.bin"</font></div>
<div><font size="2" face="Courier New"></font> </div>
<div><font size="2" face="Courier New">cisco 7206VXR (NPE400) processor (revision
A) with 491520K/32768K bytes of memory.<br>Processor board ID 29496245<br>R7000
CPU at 350MHz, Implementation 39, Rev 3.2, 256KB L2 Cache<br>6 slot VXR
midplane, Version 2.7</font></div>
<div><font size="2" face="Courier New"></font> </div>
<div><font size="2" face="Courier New">Last reset from power-on<br>Bridging
software.<br>X.25 software, Version 3.0.0.<br>Primary Rate ISDN software,
Version 1.1.</font></div>
<div><font size="2" face="Courier New"></font> </div>
<div><font size="2" face="Courier New">PCI bus mb0_mb1 (Slots 0, 1, 3 and 5) has a
capacity of 600 bandwidth points.<br>Current configuration on bus mb0_mb1 has a
total of 470 bandwidth points.<br>This configuration is within the PCI bus
capacity and is supported.</font></div>
<div><font size="2" face="Courier New"></font> </div>
<div><font size="2" face="Courier New">PCI bus mb2 (Slots 2, 4, 6) has a capacity
of 600 bandwidth points.<br>Current configuration on bus mb2 has a total of 380
bandwidth points<br>This configuration is within the PCI bus capacity and is
supported.</font></div>
<div><font size="2" face="Courier New"></font> </div>
<div><font size="2" face="Courier New">Please refer to the following document
"Cisco 7200 Series Port Adaptor<br>Hardware Configuration Guidelines" on
Cisco.com <</font><a href="http://www.cisco.com" target="_blank"><font size="2" face="Courier New">http://www.cisco.com</font></a><font size="2" face="Courier New">><br>for c7200 bandwidth points oversubscription and usage
guidelines.</font></div>
<div><font size="2" face="Courier New"></font> </div>
<div><br><font size="2" face="Courier New">2 FastEthernet/IEEE 802.3
interface(s)<br>31 Serial network interface(s)<br>1 ATM network
interface(s)<br>1 Channelized T3 port(s)<br>125K bytes of non-volatile
configuration memory.</font></div>
<div><font size="2" face="Courier New"></font> </div>
<div><font size="2" face="Courier New">20480K bytes of Flash PCMCIA card at slot 0
(Sector size 128K).<br>4096K bytes of Flash internal SIMM (Sector size
256K).<br>Configuration register is 0x2102</font></div>
<div><font size="2" face="Courier New"></font> </div>
<div><font size="2" face="Courier New">gw1.armplc#config<br>Configuring from
terminal, memory, or network [terminal]? t<br>Enter configuration commands, one
per line. End with CNTL/Z.<br>gw1.armplc(config)#mls
qos<br>
^<br>% Invalid input detected at '^' marker.</font></div>
<div><font size="2" face="Courier New"></font> </div>
<div><font size="2" face="Courier New">gw1.armplc(config)#exit<br>gw1.armplc#<br></font></div></div>
<br>_______________________________________________<br>
cisco-voip mailing list<br>
<a href="mailto:cisco-voip@puck.nether.net">cisco-voip@puck.nether.net</a><br>
<a href="https://puck.nether.net/mailman/listinfo/cisco-voip" target="_blank">https://puck.nether.net/mailman/listinfo/cisco-voip</a><br>
<br></blockquote></div><br></div>