<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META content="text/html; charset=iso-8859-1" http-equiv=Content-Type>
<META name=GENERATOR content="MSHTML 8.00.6001.19120">
<STYLE></STYLE>
</HEAD>
<BODY>
<DIV><FONT size=2 face=Arial>Well, this sort of thing keeps happening. Now, I'm
working on a Cisco 7206 running c7200-is-mz.123-22.bin. The feature navigator is
quite clear that qos and autoqos-voip are supported on this router.</FONT></DIV>
<DIV><FONT size=2 face=Arial></FONT> </DIV>
<DIV><FONT size=2 face=Arial>Go to global config, enter "mls qos" to enable qos
-- invalid input at global config.</FONT></DIV>
<DIV><FONT size=2 face=Arial></FONT> </DIV>
<DIV><FONT size=2 face=Arial>==========</FONT></DIV>
<DIV><FONT size=2 face="Courier New">gw1.armplc#show ver<BR>Cisco Internetwork
Operating System Software<BR>IOS (tm) 7200 Software (C7200-IS-M), Version
12.3(22), RELEASE SOFTWARE (fc2)<BR>Technical Support: </FONT><A
href="http://www.cisco.com/techsupport"><FONT size=2
face="Courier New">http://www.cisco.com/techsupport</FONT></A><BR><FONT size=2
face="Courier New">Copyright (c) 1986-2007 by cisco Systems, Inc.<BR>Compiled
Wed 24-Jan-07 20:17 by ccai<BR>Image text-base: 0x60008AF4, data-base:
0x61D44000</FONT></DIV>
<DIV><FONT size=2 face="Courier New"></FONT> </DIV>
<DIV><FONT size=2 face="Courier New">ROM: System Bootstrap, Version
12.1(20000710:044039) [nlaw-121E_npeb 117], DEVELOPMENT SOFTWARE<BR>BOOTLDR:
7200 Software (C7200-IS-M), Version 12.3(22), RELEASE SOFTWARE
(fc2)</FONT></DIV>
<DIV><FONT size=2 face="Courier New"></FONT> </DIV>
<DIV><FONT size=2 face="Courier New">gw1.armplc uptime is 3 weeks, 2 days, 13
hours, 42 minutes<BR>System returned to ROM by power-on<BR>System image file is
"slot0:c7200-is-mz.123-22.bin"</FONT></DIV>
<DIV><FONT size=2 face="Courier New"></FONT> </DIV>
<DIV><FONT size=2 face="Courier New">cisco 7206VXR (NPE400) processor (revision
A) with 491520K/32768K bytes of memory.<BR>Processor board ID 29496245<BR>R7000
CPU at 350MHz, Implementation 39, Rev 3.2, 256KB L2 Cache<BR>6 slot VXR
midplane, Version 2.7</FONT></DIV>
<DIV><FONT size=2 face="Courier New"></FONT> </DIV>
<DIV><FONT size=2 face="Courier New">Last reset from power-on<BR>Bridging
software.<BR>X.25 software, Version 3.0.0.<BR>Primary Rate ISDN software,
Version 1.1.</FONT></DIV>
<DIV><FONT size=2 face="Courier New"></FONT> </DIV>
<DIV><FONT size=2 face="Courier New">PCI bus mb0_mb1 (Slots 0, 1, 3 and 5) has a
capacity of 600 bandwidth points.<BR>Current configuration on bus mb0_mb1 has a
total of 470 bandwidth points.<BR>This configuration is within the PCI bus
capacity and is supported.</FONT></DIV>
<DIV><FONT size=2 face="Courier New"></FONT> </DIV>
<DIV><FONT size=2 face="Courier New">PCI bus mb2 (Slots 2, 4, 6) has a capacity
of 600 bandwidth points.<BR>Current configuration on bus mb2 has a total of 380
bandwidth points<BR>This configuration is within the PCI bus capacity and is
supported.</FONT></DIV>
<DIV><FONT size=2 face="Courier New"></FONT> </DIV>
<DIV><FONT size=2 face="Courier New">Please refer to the following document
"Cisco 7200 Series Port Adaptor<BR>Hardware Configuration Guidelines" on
Cisco.com <</FONT><A href="http://www.cisco.com"><FONT size=2
face="Courier New">http://www.cisco.com</FONT></A><FONT size=2
face="Courier New">><BR>for c7200 bandwidth points oversubscription and usage
guidelines.</FONT></DIV>
<DIV><FONT size=2 face="Courier New"></FONT> </DIV>
<DIV><BR><FONT size=2 face="Courier New">2 FastEthernet/IEEE 802.3
interface(s)<BR>31 Serial network interface(s)<BR>1 ATM network
interface(s)<BR>1 Channelized T3 port(s)<BR>125K bytes of non-volatile
configuration memory.</FONT></DIV>
<DIV><FONT size=2 face="Courier New"></FONT> </DIV>
<DIV><FONT size=2 face="Courier New">20480K bytes of Flash PCMCIA card at slot 0
(Sector size 128K).<BR>4096K bytes of Flash internal SIMM (Sector size
256K).<BR>Configuration register is 0x2102</FONT></DIV>
<DIV><FONT size=2 face="Courier New"></FONT> </DIV>
<DIV><FONT size=2 face="Courier New">gw1.armplc#config<BR>Configuring from
terminal, memory, or network [terminal]? t<BR>Enter configuration commands, one
per line. End with CNTL/Z.<BR>gw1.armplc(config)#mls
qos<BR>
^<BR>% Invalid input detected at '^' marker.</FONT></DIV>
<DIV><FONT size=2 face="Courier New"></FONT> </DIV>
<DIV><FONT size=2
face="Courier New">gw1.armplc(config)#exit<BR>gw1.armplc#<BR></FONT></DIV></BODY></HTML>