<html><head><style type='text/css'>p { margin: 0; }</style></head><body><div style='font-family: Verdana; font-size: 10pt; color: #000000'>The vg202 is an IOS device. Lots of stuff out there for that. Here's one I used myself.<br><br>http://www.cisco.com/en/US/docs/ios/voice/fxs/configuration/guide/fxsbasic.html<br><br>Here's a snippet of my VG224 which should help you get SCCP ports up and running in pass-through. you'll have to configure the interfaces and stuff first though. We're using passthrough on all our gateways so it means setting all fax machines to 14.4 no ECM. This configuration attempts to register all ports, so make sure they're configured on CCM otherwise you get alarms.<br><br><div style="margin-left: 40px;"><hr style="width: 100%; height: 2px;">!<br>version 15.0<br>no service pad<br>service timestamps debug datetime localtime<br>service timestamps log datetime localtime<br>service password-encryption<br>!<br>hostname <hostname><br>!<br>boot-start-marker<br>boot system slot0:vg224-i6s-mz.150-1.M3.bin<br>boot-end-marker<br>!<br>logging buffered 4096<br>!<br>stcapp ccm-group 1<br>stcapp<br>!<br>!<br>voice service voip<br> modem passthrough nse codec g711ulaw<br>!<br>!<br>!<br>voice-card 0<br>!<br>archive<br> log config<br> hidekeys<br>!<br>!<br>!<br>!<br>!<br>!<br>!<br>sccp local <interface><br>sccp ccm <ipaddr1> identifier <id1> version <v><br>sccp<br>!<br>sccp ccm group 1<br> associate ccm <id1> priority 1<br>!<br>dial-peer voice 200 pots<br> service stcapp<br> port 2/0<br>!<br>dial-peer voice 201 pots<br> service stcapp<br> port 2/1<br>!<br>dial-peer voice 202 pots<br> service stcapp<br> port 2/2<br>!<br>dial-peer voice 203 pots<br> service stcapp<br> port 2/3<br>!<br>dial-peer voice 204 pots<br> service stcapp<br> port 2/4<br>!<br>dial-peer voice 205 pots<br> service stcapp<br> port 2/5<br>!<br>dial-peer voice 206 pots<br> service stcapp<br> port 2/6<br>!<br>dial-peer voice 207 pots<br> service stcapp<br> port 2/7<br>!<br>dial-peer voice 208 pots<br> service stcapp<br> port 2/8<br>!<br>dial-peer voice 209 pots<br> service stcapp<br> port 2/9<br>!<br>dial-peer voice 210 pots<br> service stcapp<br> port 2/10<br>!<br>dial-peer voice 211 pots<br> service stcapp<br> port 2/11<br>!<br>dial-peer voice 212 pots<br> service stcapp<br> port 2/12<br>!<br>dial-peer voice 213 pots<br> service stcapp<br> port 2/13<br>!<br>dial-peer voice 214 pots<br> service stcapp<br> port 2/14<br>!<br>dial-peer voice 215 pots<br> service stcapp<br> port 2/15<br>!<br>dial-peer voice 216 pots<br> service stcapp<br> port 2/16<br>!<br>dial-peer voice 217 pots<br> service stcapp<br> port 2/17<br>!<br>dial-peer voice 218 pots<br> service stcapp<br> port 2/18<br>!<br>dial-peer voice 219 pots<br> service stcapp<br> port 2/19<br>!<br>dial-peer voice 220 pots<br> service stcapp<br> port 2/20<br>!<br>dial-peer voice 221 pots<br> service stcapp<br> port 2/21<br>!<br>dial-peer voice 222 pots<br> service stcapp<br> port 2/22<br>!<br>dial-peer voice 223 pots<br> service stcapp<br> port 2/23<br>!<br>!<br><br><hr style="width: 100%; height: 2px;"></div><span><br><span name="x"></span>---<br>Lelio Fulgenzi, B.A.<br>Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1<br>(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)<br>^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^<br>Cooking with unix is easy. You just sed it and forget it. <br> - LFJ (with apologies to Mr. Popeil)<br><span name="x"></span><br></span><br><hr id="zwchr"><b>From: </b>"Gerrad Biffle" <Gerrad.Biffle@greensboro-nc.gov><br><b>To: </b>cisco-voip@puck.nether.net<br><b>Sent: </b>Thursday, October 6, 2011 10:26:33 AM<br><b>Subject: </b>[cisco-voip] VG202 setup ...<br><br><style><!--
/* Font Definitions */
@font-face
{font-family:Calibri;
panose-1:2 15 5 2 2 2 4 3 2 4;}
/* Style Definitions */
p.MsoNormal, li.MsoNormal, div.MsoNormal
{margin:0in;
margin-bottom:.0001pt;
font-size:11.0pt;
font-family:"Calibri","sans-serif";}
a:link, span.MsoHyperlink
{mso-style-priority:99;
color:blue;
text-decoration:underline;}
a:visited, span.MsoHyperlinkFollowed
{mso-style-priority:99;
color:purple;
text-decoration:underline;}
span.EmailStyle17
{mso-style-type:personal-compose;
font-family:"Calibri","sans-serif";
color:windowtext;}
.MsoChpDefault
{mso-style-type:export-only;}
@page WordSection1
{size:8.5in 11.0in;
margin:1.0in 1.0in 1.0in 1.0in;}
div.WordSection1
{page:WordSection1;}
--></style><!--[if gte mso 9]><xml>
<o:shapedefaults v:ext="edit" spidmax="1026" />
</xml><![endif]--><!--[if gte mso 9]><xml>
<o:shapelayout v:ext="edit">
<o:idmap v:ext="edit" data="1" />
</o:shapelayout></xml><![endif]--><div class="WordSection1"><p class="MsoNormal">Does anyone have a VG202 config they could share? Or any tips or tricks for setting these up? I’m having a time getting one built and registered to our CUCM. Trying to setup to replace an ATA that is giving us problems with faxing.</p><p class="MsoNormal"> </p><p class="MsoNormal">Thanks in advance.</p><p class="MsoNormal"> </p><p class="MsoNormal">Gerrad Biffle</p></div><font face="monospace">=======================================================<br>
Please note that email sent to and from this address is subject <br>
to the North Carolina Public Records Law and may be disclosed to third parties. </font><br>_______________________________________________<br>cisco-voip mailing list<br>cisco-voip@puck.nether.net<br>https://puck.nether.net/mailman/listinfo/cisco-voip<br></div></body></html>