You don't need the ether-channel configuration. For CUCM NIC teaming the switch ports should just be plain old access ports, no LACP. <br><br clear="all">-matthew<br>
<br><br><div class="gmail_quote">On Sat, Oct 15, 2011 at 11:11 AM, dschulz <span dir="ltr"><<a href="mailto:dschulz@skyline-ats.com">dschulz@skyline-ats.com</a>></span> wrote:<br><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex;">
<div bgcolor="#FFFFFF"><div>Gig interface should be set to auto<br><br>Dave<div><br></div></div><div><div></div><div class="h5"><div><br>On Oct 15, 2011, at 10:59 AM, "Buchanan, James" <<a href="mailto:jbuchanan@presidio.com" target="_blank">jbuchanan@presidio.com</a>> wrote:<br>
<br></div><div></div><blockquote type="cite"><div>
<div><p class="MsoNormal"><span style="font-size:11.0pt;color:#1F497D">For starters, your Ethernet interfaces on the server are set to auto negotiate, but on the switch are hard-coded. Big no-no. Change the switch side first.<u></u><u></u></span></p>
<p class="MsoNormal"><span style="font-size:11.0pt;color:#1F497D"><u></u> <u></u></span></p><p class="MsoNormal"><b><span style="font-size:7.5pt;color:gray">James Buchanan</span></b><span style="font-size:7.5pt;color:#7F7F7F">|</span><b><span style="font-size:7.5pt;color:gray"> UC Technology Manager </span></b><span style="font-size:7.5pt;color:#7F7F7F">|</span><span style="font-size:7.5pt;color:gray"> <b>Presidio South </b></span><span style="font-size:7.5pt;color:#7F7F7F">|</span><b><span style="font-size:7.5pt;color:gray"> Presidio Networked Solutions </span></b><span style="font-size:7.5pt;color:gray"><u></u><u></u></span></p>
<p class="MsoNormal"><b><span style="font-size:7.5pt;color:gray">12 Cadillac Dr Ste 130 Brentwood, TN 37027 </span></b><span style="font-size:7.5pt;color:#7F7F7F">|</span><b><span style="font-size:7.5pt;color:gray"> </span></b><b><span style="font-size:11.0pt;color:#1F497D"><a href="mailto:jbuchanan@presidio.com" target="_blank"><span style="font-size:7.5pt">jbuchanan@presidio.com</span></a></span></b><b><span style="font-size:7.5pt;color:#548DD4"><u></u><u></u></span></b></p>
<p class="MsoNormal"><b><span style="font-size:7.5pt;color:gray">D: <a href="tel:615-866-5729" value="+16158665729" target="_blank">615-866-5729</a></span></b><span style="font-size:7.5pt;color:gray"> </span><span style="font-size:7.5pt;color:#7F7F7F">|</span><span style="font-size:7.5pt;color:gray"> <b>F:<a href="tel:615-866-5781" value="+16158665781" target="_blank">615-866-5781</a></b> </span><span style="font-size:11.0pt;color:#1F497D"><a href="http://www.presidio.com/" title="blocked::http://www.presidio.com/" target="_blank"><b><span style="font-size:7.5pt">www.presidio.com</span></b></a><u></u><u></u></span></p>
<p class="MsoNormal"><span style="font-size:11.0pt;color:#1F497D"><u></u> <u></u></span></p><p class="MsoNormal"><b><span style="font-size:10.0pt">From:</span></b><span style="font-size:10.0pt"> <a href="mailto:cisco-voip-bounces@puck.nether.net" target="_blank">cisco-voip-bounces@puck.nether.net</a> [mailto:<a href="mailto:cisco-voip-bounces@puck.nether.net" target="_blank">cisco-voip-bounces@puck.nether.net</a>] <b>On Behalf Of </b>Michel L. M. B. Perez<br>
<b>Sent:</b> Saturday, October 15, 2011 9:41 AM<br><b>To:</b> <a href="mailto:cisco-voip@puck.nether.net" target="_blank"></a><a href="mailto:cisco-voip@puck.nether.net" target="_blank">cisco-voip@puck.nether.net</a><br><b>Subject:</b> [cisco-voip] CUCM 8.0.3.20000-2 - Network Failover DOWN!<u></u><u></u></span></p>
<p class="MsoNormal"><u></u> <u></u></p><p class="MsoNormal">Hello Peolple,<br><br>I have TWO DC, my publisher is connected to a Cisco 6504 Switch and de Subscriber is connected to 6509, my problem is that i´ve enabled bond0 interface (nic teaming at this two MCS7835 servers), but the port-channel is not coming up neither from the server side and from the switch side, anyone here has this working? Here are some outputs from my 6509.<br>
<br>Server Config<br><br>admin:show network failover<br>Bond 0<br>DHCP : disabled Status : up<br>IP Address : 10.5.3.216 IP Mask : 255.255.000.000<br>Link Detected: no Mode : Auto disabled, N/A, N/A<br>
<br>Ethernet 0<br>DHCP : disabled Status : up<br>IP Address : IP Mask :<br>Link Detected: yes Mode : Auto enabled, Full, 1000MB/s<br><br>Ethernet 1<br>DHCP : disabled Status : up<br>
IP Address : IP Mask :<br>Link Detected: yes Mode : Auto enabled, Full, 1000MB/s<br><br>DNS<br>Primary : 10.5.3.3 Secondary : 10.5.3.102<br>Options : timeout:5 attempts:2<br>
Domain : xxx.xxx.xx<br>Gateway : 10.5.2.1 on Ethernet bond0<br><br>Switch Config<br><br>interface Port-channel11<br> description description #### LACP - SRV-CUCM-FLN02 ####<br> switchport<br> switchport mode access<br>
spanning-tree portfast edge<br> spanning-tree bpduguard enable<br><br>interface GigabitEthernet1/41<br> description #### CUCM - ETH1 ####<br> switchport<br> switchport mode access<br> speed 1000<br> duplex full<br> no cdp enable<br>
channel-group 11 mode active<br> spanning-tree portfast edge<br> spanning-tree bpduguard enable<br><br>interface GigabitEthernet1/42<br> description #### CUCM - ETH2 ####<br> switchport<br> switchport mode access<br> speed 1000<br>
duplex full<br> no cdp enable<br> channel-group 11 mode active<br> spanning-tree portfast edge<br> spanning-tree bpduguard enable<br><br><br>SW_6509E(config-if-range)#do sh etherc 11 summ<br>Flags: D - down P - bundled in port-channel<br>
I - stand-alone s - suspended<br> H - Hot-standby (LACP only)<br> R - Layer3 S - Layer2<br> U - in use N - not in use, no aggregation<br> f - failed to allocate aggregator<br>
<br> M - not in use, no aggregation due to minimum links not met<br> m - not in use, port not aggregated due to minimum links not met<br> u - unsuitable for bundling<br> d - default port<br><br>
w - waiting to be aggregated<br>Number of channel-groups in use: 11<br>Number of aggregators: 12<br><br>Group Port-channel Protocol Ports<br>------+-------------+-----------+-----------------------------------------------<br>
11 Po11(SD) LACP Gi1/41(I) Gi1/42(I)<br><br>Last applied Hash Distribution Algorithm: -<br><br>SW_6509E(config-if-range)#<br><br><br clear="all"><u></u><u></u></p><div><p class="MsoNormal">--<u></u><u></u></p>
</div><div><p class="MsoNormal">Michel Perez<u></u><u></u></p></div><div><p class="MsoNormal">Skype: michelmbperez<u></u><u></u></p></div><div><p class="MsoNormal"><a href="mailto:michelmbperez@gmail.com" target="_blank"></a><a href="mailto:michelmbperez@gmail.com" target="_blank">michelmbperez@gmail.com</a><u></u><u></u></p>
</div><div><p class="MsoNormal"><span style="font-size:10.0pt"><a href="http://br.linkedin.com/in/michelmbperez" target="_blank"></a><a href="http://br.linkedin.com/in/michelmbperez" target="_blank">http://br.linkedin.com/in/michelmbperez</a></span><u></u><u></u></p>
</div><p class="MsoNormal"><u></u> <u></u></p></div></div></blockquote></div></div><blockquote type="cite"><div><span>_______________________________________________</span><br><span>cisco-voip mailing list</span><br><span><a href="mailto:cisco-voip@puck.nether.net" target="_blank">cisco-voip@puck.nether.net</a></span><br>
<span><a href="https://puck.nether.net/mailman/listinfo/cisco-voip" target="_blank">https://puck.nether.net/mailman/listinfo/cisco-voip</a></span><br></div></blockquote></div><br>_______________________________________________<br>
cisco-voip mailing list<br>
<a href="mailto:cisco-voip@puck.nether.net">cisco-voip@puck.nether.net</a><br>
<a href="https://puck.nether.net/mailman/listinfo/cisco-voip" target="_blank">https://puck.nether.net/mailman/listinfo/cisco-voip</a><br>
<br></blockquote></div><br>