<html><head><style type='text/css'>p { margin: 0; }</style></head><body><div style='font-family: Verdana; font-size: 10pt; color: #000000'>"TAC certified memory<span> from third party" ???<br><br>Can you provide references for this statement? I was under the impression the only Cisco supported memory is Cisco memory.<br><br><span name="x"></span>---<br>Lelio Fulgenzi, B.A.<br>Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1<br>(519) 824-4120 x56354 (519) 767-1060 FAX (ANNU)<br>^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^<br>Cooking with unix is easy. You just sed it and forget it. <br> - LFJ (with apologies to Mr. Popeil)<br><span name="x"></span><br></span><br><hr id="zwchr"><b>From: </b>"Chase Voisin" <chase.voisin@gmail.com><br><b>To: </b>cisco-voip@puck.nether.net<br><b>Sent: </b>Wednesday, November 30, 2011 1:55:44 PM<br><b>Subject: </b>Re: [cisco-voip] ISR 2800 support in new CUCM 8.6 (and future<br><br>I saw this one and I recently went through this same process of<br>determining memory requirements. The most accurate way I know of<br>without opening the router to check the memory is do a show ver and<br>look for this line<br><br><br>Cisco 2811 (revision 53.51) with 247808K/14336K bytes of memory.<br><br>Take your memory since it is based on two separate components and add those up<br><br>In this case it comes out to 262144. Divide that up by 1024 and you<br>get your total memory expressed in MB, in this case 256 MB, too little<br>to run IOS 15.1.x so upgrade was needed in this case.<br><br>We looked at memoryx for our memory and compared it to Cisco. Cisco<br>was over 10x the cost of some of the TAC certified memory from third<br>party.<br>_______________________________________________<br>cisco-voip mailing list<br>cisco-voip@puck.nether.net<br>https://puck.nether.net/mailman/listinfo/cisco-voip<br></div></body></html>