You'll need to run callmanager express (eg; "telephony-service") on the router in question, and register a transcoding dspfarm to the CME instance.<br><br>Example here:<br><a href="http://www.cisco.com/en/US/products/sw/voicesw/ps5640/products_configuration_example09186a008092d6b3.shtml">http://www.cisco.com/en/US/products/sw/voicesw/ps5640/products_configuration_example09186a008092d6b3.shtml</a><br>
<br clear="all">-matthew<br>
<br><div class="gmail_quote">On Thu, Jan 5, 2012 at 5:01 AM, Robert Hass <span dir="ltr"><<a href="mailto:robhass@gmail.com">robhass@gmail.com</a>></span> wrote:<br><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">
Hi<br>
<br>
I've got Cisco 2901 with two dial-peers:<br>
1) H.323, codec G.711 u-law<br>
2) SIP, codec ILBC<br>
<br>
This Cisco have to transport voice from H.323 trunk do SIP trunk with<br>
transcoding between G.711u and ILBC.<br>
But I'm not sure how to configure transcoding within dial-peers.<br>
Router has PVDM3-64.<br>
<br>
I have configured:<br>
<br>
voice-card 0<br>
 dspfarm<br>
 dsp services dspfarm<br>
<br>
but it's look that is not all what is needed to have transcoding<br>
between dial-peers<br>
<br>
Any hints ?<br>
<br>
Robert<br>
_______________________________________________<br>
cisco-voip mailing list<br>
<a href="mailto:cisco-voip@puck.nether.net">cisco-voip@puck.nether.net</a><br>
<a href="https://puck.nether.net/mailman/listinfo/cisco-voip" target="_blank">https://puck.nether.net/mailman/listinfo/cisco-voip</a><br>
</blockquote></div><br>