<html><head><style type='text/css'>p { margin: 0; }</style></head><body><div style='font-family: Verdana; font-size: 10pt; color: #000000'>Yes - I used the mobility softkey option working. Didn't do anything special except follow the instructions in the document. Two or three times over to ensure I did things correctly. ;)<br><br>Right now I'm working on getting Desktop integration working, might be a bug though.<br><br><br><span><br><span name="x"></span>---<br>Lelio Fulgenzi, B.A.<br>Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1<br>(519) 824-4120 x56354 (519) 767-1060 FAX (ANNU)<br>^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^<br>Cooking with unix is easy. You just sed it and forget it. <br> - LFJ (with apologies to Mr. Popeil)<br><span name="x"></span><br></span><br><hr id="zwchr"><b>From: </b>"Roger Wiklund" <roger.wiklund@gmail.com><br><b>To: </b>"Lelio Fulgenzi" <lelio@uoguelph.ca><br><b>Cc: </b>"Cisco VOIP" <cisco-voip@puck.nether.net><br><b>Sent: </b>Tuesday, February 28, 2012 6:57:38 AM<br><b>Subject: </b>Re: [cisco-voip] Cisco Jabber for iPhone transfer to mobile network problems<br><br>Alessandro - It should work, do you mean that Jabber for iPhone does<br>not work at all or do you mean transfer to GSM?<br><br>Lelio - did you manage to get transfter to mobile network working by<br>using mobility softkey?<br>I'm going crazy, I have tried everything, nothing works. But<br>mobility/transfer to mobile works from my CIPC.<br><br>I can get transfer to mobile network using handoff DN but I don't want<br>that because I'm using MGCP GWs.<br><br>Thanks,<br>Regards<br><br>On Tue, Feb 28, 2012 at 11:22 AM, kpyib@tin.it <kpyib@tin.it> wrote:<br>> Hi Roger,<br>> I've also installed Cisco Jabber for ipHone version 8.6.3, but can't make<br>> it work with CUCM 8.6.1a.<br>><br>><br>> Do you can confirm that Jabber for iPhone work only with CUCM 8.6.2a?<br>><br>> Cisco Jabber for Android 8.6.4.1434 works fine also with CUCM 8.6.1a.<br>><br>><br>><br>> Thank you<br>><br>> Can you confirm that?<br>><br>><br>><br>> Regards<br>><br>> Alessandro Bertacco<br>><br>> ----Messaggio originale----<br>> Da: roger.wiklund@gmail.com<br>> Data: 27-feb-2012 18.53<br>> A: "Cisco VOIP"<cisco-voip@puck.nether.net><br>> Ogg: [cisco-voip] Cisco Jabber for iPhone transfer to mobile network<br>> problems<br>><br>><br>> Has anyone successfully configured so you can transfer a jabber voip<br>> call to the GSM network?<br>><br>> I have a registered Jabber for iPhone, I can receive in/out calls both<br>> internally and externally.<br>> I have configured Mobile Identity with my mobile phone number, so if<br>> the phone is not registered or no answer the mobile phone rings.<br>> I have configured partial match with 9 digits in service parameter. I<br>> have checked that caller ID is matching Mobile Identify.<br>> I have configured the hand off number<br>> Device CSS/Rerouting CSS etc is all correct.<br>> I have followed the steps in the config guide for Jabber.<br>><br>> But still when I press the button to transfer the call to mobile<br>> network it tried for about 5 seconds then nothing. I can see no<br>> activity in/out on the gateways.<br>><br>> Any tips?<br>><br>> /Roger<br>> _______________________________________________<br>> cisco-voip mailing list<br>> cisco-voip@puck.nether.net<br>> https://puck.nether.net/mailman/listinfo/cisco-voip<br>><br>><br></div></body></html>