Restarting TFTP on all nodes ended up fixing the issue.  I had to reset phones afterwards and they basically did a reset, downloaded the new ITL file, did another reset and then came back up.<br><br>All cluster nodes now have a TVS entry in the Trust List as viewed from the phone LCD where before the TFTP restart they did not.<br>
<br>Wes - Thanks for checking and giving me some confidence. :)<br><br><div class="gmail_quote">On Fri, Mar 2, 2012 at 11:46 AM, Wes Sisk <span dir="ltr"><<a href="mailto:wsisk@cisco.com">wsisk@cisco.com</a>></span> wrote:<br>
<blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex"><div style="word-wrap:break-word">So far we have not seen any instance where just restarting TFTP triggers the need to delete ITLs.<div>
<br></div><div>/wes</div><div><br><div><div><div></div><div class="h5"><div>On Mar 2, 2012, at 11:18 AM, Justin Steinberg wrote:</div><br>Looks like a couple of bugs are describing my problem:<br><br>CSCth63321 - Incomplete ITL built after Sub is upgraded-TFTP service running on Sub<br>
CSCte58709 - Upgrading subscriber from pre 8.0 to 8.0+ requires restart TFTP, CUCM<br>
<br>I am just unsure whether restarting the TFTP service as the notes describe will cause me to need to delete ITLs from the phones.<br><br><div class="gmail_quote">On Fri, Mar 2, 2012 at 11:08 AM, Justin Steinberg <span dir="ltr"><<a href="mailto:jsteinberg@gmail.com" target="_blank">jsteinberg@gmail.com</a>></span> wrote:<br>

<blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">Worked on an upgrade last night from CM 7.1 to 8.5.<br><br>After the upgrade I am having some ITL issues and think I have a couple ways to work this out but wanted to run this past the group as I haven't seen anyone with a specific issue like this.<br>


<br>CM 8.5.1su2 with three CUCMs running CallManager & TFTP service<br><br>What is not working:<br>-Corporate Directory - I am receiving host not found.  I verified on the phone console logs that I am having a TVS/ITL issue.<br>


-When I look at the contents of the ITL file on the phone LCD, I am only seeing entries for TFTP and TVS on the server that TFTP is pointing to.  I do not see any entries for other cluster nodes<br><br>What is working:<br>


-TFTP downloads (ring tones, etc) and TFTP config changes<br>-'show itl' from CLI is showing verification is ok on all nodes<br><br>When I do a TFTP get and download the ITL file from CUCM and compare the Md5 with the phone things match.  Show ITL on the CLI shows verification is ok.   However, if I open the ITLSEPxxxxx.tlv file in notepad, I am not seeing all of my servers listed in the ITL file.   However, when I do a 'show ITL' from the CLI, all the servers show up in there.  It is almost like the TFTP server has old versions of the ITL file (based on switch-version times? etc) and was not updated as other subs went through the switch-version from 7.1 to 8.5.<br>


<br>On a hunch, I restarted the TFTP service on a sub that no phones actually use for TFTP.  After restarting the TFTP service, if I download the ITLSEPxxxx.tlv file and do a MD5, the value changed from pre-TFTP service restart.  Now when I open the file in notepad, I see all of my CUCMs listed in the ITL file.   <br>


<br>My question is, can I just restart the TFTP service on the sub that my phones are actually using for TFTP?    I am thinking the TFTP restart will cause the ITL to update (and include the other cluster nodes) but I am not sure whether the phones will then fail with ITL mismatch or whether the phones will update their ITL file and now include the other servers.<br>


<br>I am also thinking of implementing the rollback to PRE 8.0 service parameter, resetting the phones to clear the ITL and then restart the TFTP service.<br><br>Any thoughts on whether restarting the TFTP service on the node that phones are using for TFTP will just update the existing ITL the phones use with the other CM nodes or whether that will in effect create an entirely new ITL which would then require manually deleting the ITL files ?<br>


<br>Thanks<br><font color="#888888"><br>Justin<br><br><br><br>
</font></blockquote></div><br></div></div>
_______________________________________________<br>cisco-voip mailing list<br><a href="mailto:cisco-voip@puck.nether.net" target="_blank">cisco-voip@puck.nether.net</a><br><a href="https://puck.nether.net/mailman/listinfo/cisco-voip" target="_blank">https://puck.nether.net/mailman/listinfo/cisco-voip</a><br>
</div><br></div></div></blockquote></div><br>