Take the simplest example - PVDM3-16 on a partial PRI.<br><br>The 16 channels will be allocated to the PRIs, but as soon as one of those calls is G.729 you won't be able to get 16 calls through.<br><br>I haven't played with the allocation on the PVDM3's as much as in the back end it's a lot more complex than the 2's.<br>
<br>-nick<br><br><div class="gmail_quote">On Thu, Apr 26, 2012 at 12:31 AM, Anthony Holloway <span dir="ltr"><<a href="mailto:avholloway%2Bcisco-voip@gmail.com">avholloway+cisco-voip@gmail.com</a>></span> wrote:<br>
<blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex"><div class="gmail_extra">Nick,</div><div class="gmail_extra"><br></div><div class="gmail_extra">Could you clarify your point of being able to over provision here? From my experience, as you add sessions to one service, it dynamically reduces the available sessions on the other services.</div>
<div class="gmail_extra"><br></div><div class="gmail_extra">I.e., If you do a ? on sessions for transcoding, it might say <1-40>. But if you go and add a few more conferencing sessions first, and come back, it will be lower. Say <1-32>. I'm making these numbers up, but the fact remains, the maximum number you can type in, is limited by the available resources at config time.</div>
<div class="gmail_extra"><br></div><div class="gmail_extra">Thanks for sharing. I look forward to your response.</div><span class="HOEnZb"><font color="#888888"><div class="gmail_extra"><br></div><div class="gmail_extra">
Anthony Holloway</div></font></span><div class="HOEnZb"><div class="h5"><div class="gmail_extra">
<br><div class="gmail_quote">On Wed, Apr 25, 2012 at 11:05 PM, Nick Matthews <span dir="ltr"><<a href="mailto:matthnick@gmail.com" target="_blank">matthnick@gmail.com</a>></span> wrote:<br><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">
<div class="gmail_extra">You can still overprovision.<br><br>Examples:<br>-In the PVDM3's conferences are not reserved upon configuration.<br>-You are locking up G.711 (low complexity) codec, not a high complexity codec<br>
-Transcoding sessions are not locked upon configuration<br>-Video transcoding/switching sessions are not locked<br><br>So if you're using non G711 codecs, transcoding, conferencing, MTPs, or video, you can overprovision. If all you're doing is G711 termination to POTS/PRI I don't think you can.<span><font color="#888888"><br>
<br>-nick<br><br></font></span><div class="gmail_quote"><div><div>On Wed, Apr 25, 2012 at 11:26 AM, Lelio Fulgenzi <span dir="ltr"><<a href="mailto:lelio@uoguelph.ca" target="_blank">lelio@uoguelph.ca</a>></span> wrote:<br>
</div></div><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex"><div><div>
<div><div style="font-size:10pt;font-family:Verdana">cool! thanks. <span><br><div><br><span name="x"></span>---<br>Lelio Fulgenzi, B.A.<br>Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1<br>
(519) 824-4120 x56354 (519) 767-1060 FAX (ANNU)<br>^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^<br>Cooking with unix is easy. You just sed it and forget it. <br> - LFJ (with apologies to Mr. Popeil)<br>
<span name="x"></span><br></div></span><br><hr><b>From: </b>"Ted Nugent" <<a href="mailto:tednugent73@gmail.com" target="_blank">tednugent73@gmail.com</a>><br><b>To: </b>"Lelio Fulgenzi" <<a href="mailto:lelio@uoguelph.ca" target="_blank">lelio@uoguelph.ca</a>><br>
<b>Cc: </b>"Erick Wellnitz" <<a href="mailto:ewellnitzvoip@gmail.com" target="_blank">ewellnitzvoip@gmail.com</a>>, "cisco-voip voyp list" <<a href="mailto:cisco-voip@puck.nether.net" target="_blank">cisco-voip@puck.nether.net</a>><br>
<b>Sent: </b>Wednesday, April 25, 2012 11:04:12 AM<div><br><b>Subject: </b>Re: [cisco-voip] PVDMs, DSP farms, et al.... next steps?<br><br></div><div><div>Once you build the channels on the controller "pri-group timeslots 1-24" the DSP resources are locked, FXS and FXO lock on bootup.<div>
<br></div><div>I think that command you're looking at will show you what you want, you can see the transcoding towards the bottom</div>
<div><br></div><div><br></div><div><div>PS-RTRPSTN-01#show dsp-group all</div><div>DSP groups on slot 0:</div><div>dsp 1:</div><div> State: UP, firmware: 28.3.3</div><div> Max signal/voice channel: 43/43</div><div> Max credits: 645, Voice credits: 645, Video credits: 0</div>
<div> num_of_sig_chnls_allocated: 43</div><div> Transcoding channels allocated: 0</div><div> Group: FLEX_GROUP_VOICE, complexity: FLEX</div><div> Shared credits: 645, reserved credits: 0</div><div> Signaling channels allocated: 43</div>
<div> Voice channels allocated: 0</div><div> Credits used (rounded-up): 0</div><div> Slot: 0</div><div> Device idx: 0</div><div> PVDM Slot: 0</div><div> Dsp Type: SP2600</div><div><br></div><div>dsp 2:</div><div>
State: UP, firmware: 28.3.3</div><div> Max signal/voice channel: 43/43</div><div> Max credits: 645, Voice credits: 645, Video credits: 0</div><div> num_of_sig_chnls_allocated: 43</div><div> Transcoding channels allocated: 0</div>
<div> Group: FLEX_GROUP_VOICE, complexity: FLEX</div><div> Shared credits: 645, reserved credits: 0</div><div> Signaling channels allocated: 43</div><div> Voice channels allocated: 0</div><div> Credits used (rounded-up): 0</div>
<div> Slot: 0</div><div> Device idx: 0</div><div> PVDM Slot: 0</div><div> Dsp Type: SP2600</div><div><br></div><div>dsp 3:</div><div> State: UP, firmware: 28.3.3</div><div> Max signal/voice channel: 42/43</div><div>
Max credits: 645, Voice credits: 645, Video credits: 0</div><div> num_of_sig_chnls_allocated: 42</div><div> Transcoding channels allocated: 0</div><div> Group: FLEX_GROUP_VOICE, complexity: FLEX</div><div> Shared credits: 645, reserved credits: 0</div>
<div> Signaling channels allocated: 42</div><div> Voice channels allocated: 0</div><div> Credits used (rounded-up): 0</div><div> Slot: 0</div><div> Device idx: 0</div><div> PVDM Slot: 0</div><div> Dsp Type: SP2600</div>
<div><br></div><div>dsp 4:</div><div> State: UP, firmware: 28.3.3</div><div> Max signal/voice channel: 43/43</div><div> Max credits: 645, Voice credits: 645, Video credits: 0</div><div> num_of_sig_chnls_allocated: 43</div>
<div> Transcoding channels allocated: 0</div><div> Group: FLEX_GROUP_VOICE, complexity: FLEX</div><div> Shared credits: 645, reserved credits: 0</div><div> Signaling channels allocated: 43</div><div> Voice channels allocated: 0</div>
<div> Credits used (rounded-up): 0</div><div> Slot: 0</div><div> Device idx: 1</div><div> PVDM Slot: 0</div><div> Dsp Type: SP2600</div><div><br></div><div>dsp 5:</div><div> State: UP, firmware: 28.3.3</div><div>
Max signal/voice channel: 43/43</div>
<div> Max credits: 645, Voice credits: 645, Video credits: 0</div><div> num_of_sig_chnls_allocated: 13</div><div> Transcoding channels allocated: 22</div><div> Group: FLEX_GROUP_VOICE, complexity: FLEX</div><div> Shared credits: 201, reserved credits: 0</div>
<div> Signaling channels allocated: 13</div><div> Voice channels allocated: 0</div><div> Credits used (rounded-up): 0</div><div> Group: FLEX_GROUP_XCODE, complexity: MEDIUM</div><div> Shared credits: 0, reserved credits: 444</div>
<div> Transcoding channels allocated: 0</div><div> Credits used (rounded-up): 0</div><div> Slot: 0</div><div> Device idx: 1</div><div> PVDM Slot: 0</div><div> Dsp Type: SP2600</div><div><br></div><div>dsp 6: </div>
<div> State: UP, firmware: 28.3.3</div><div> Max signal/voice channel: 42/43</div><div> Max credits: 645, Voice credits: 645, Video credits: 0</div><div> num_of_sig_chnls_allocated: 0</div><div> Transcoding channels allocated: 28</div>
<div> Group: FLEX_GROUP_VOICE, complexity: FLEX</div><div> Shared credits: 80, reserved credits: 0</div><div> Signaling channels allocated: 0</div><div> Voice channels allocated: 0</div><div> Credits used (rounded-up): 0</div>
<div> Group: FLEX_GROUP_XCODE, complexity: MEDIUM</div><div> Shared credits: 0, reserved credits: 565</div><div> Transcoding channels allocated: 0</div><div> Credits used (rounded-up): 0</div><div> Slot: 0</div>
<div> Device idx: 1</div><div> PVDM Slot: 0</div><div> Dsp Type: SP2600</div><br><div class="gmail_quote"><br></div></div>
</div></div></div></div><br></div></div><div>_______________________________________________<br>
cisco-voip mailing list<br>
<a href="mailto:cisco-voip@puck.nether.net" target="_blank">cisco-voip@puck.nether.net</a><br>
<a href="https://puck.nether.net/mailman/listinfo/cisco-voip" target="_blank">https://puck.nether.net/mailman/listinfo/cisco-voip</a><br>
<br></div></blockquote></div><br></div>
<br>_______________________________________________<br>
cisco-voip mailing list<br>
<a href="mailto:cisco-voip@puck.nether.net" target="_blank">cisco-voip@puck.nether.net</a><br>
<a href="https://puck.nether.net/mailman/listinfo/cisco-voip" target="_blank">https://puck.nether.net/mailman/listinfo/cisco-voip</a><br>
<br></blockquote></div><br></div>
</div></div></blockquote></div><br>