<html><head></head><body style="word-wrap: break-word; -webkit-nbsp-mode: space; -webkit-line-break: after-white-space; "> This has been sorted out. The Cisco documentation show the command in CME 8.5 which is IOS 15.1-3T but after upgrading the router to CME 8.6 IOS 15.1-4M the command is now present. <div><br><div><br><div><div>On Jun 13, 2012, at 10:17 PM, Mark Holloway wrote:</div><br class="Apple-interchange-newline"><blockquote type="cite"><div style="word-wrap: break-word; -webkit-nbsp-mode: space; -webkit-line-break: after-white-space; ">I'm configuring 9951 phones on CME 8.5. I have found two separate Cisco documents that show the following commands as it relates to CME 8.5:<div><br></div><div><p>Router# configure terminal</p><p>Router(config)#voice register pool 1</p><p>Router(config-register-pool)#apply-config</p><div><br></div></div><div><br></div><div>When I enter "voice register pool 1" on the router there is no apply-config command. The router is a 2821 running c2800nm-ipvoice_ivs-mz.151-3.T2.</div><div><br></div><div>I can go to "voice register global" and enter "create profile" and the router generates SEPECC882B19D60.cnf.xml. My only hangup is whether I am missing something by not having the apply-config command. </div><div><br></div><div><br></div><div>Thanks,</div><div>Mark</div><div><br></div><div><br></div><div><br></div><div><br></div><div><br></div></div>_______________________________________________<br>cisco-voip mailing list<br><a href="mailto:cisco-voip@puck.nether.net">cisco-voip@puck.nether.net</a><br>https://puck.nether.net/mailman/listinfo/cisco-voip<br></blockquote></div><br></div></div></body></html>