<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META content="text/html; charset=iso-8859-1" http-equiv=Content-Type>
<META name=GENERATOR content="MSHTML 8.00.6001.19258">
<STYLE></STYLE>
</HEAD><FONT face=Arial><FONT size=2>
<BODY>
<DIV>Have a ds0-group configured on an AS5400 as a cas-custom group. The ds0's
are on a t1 to a cisco 2400IAD.</DIV>
<DIV> </DIV>
<DIV>AS5400</DIV>
<DIV> </DIV>
<DIV><FONT face="Courier New">controller T1 1/0:24<BR> framing
esf<BR> channel-group 0 timeslots 1-20 speed 64<BR> loopback network
ignore<BR> ds0-group 20 timeslots 21-24 type
e&m-fgb<BR> cas-custom 20<BR></FONT></DIV>
<DIV>2400IAD</DIV>
<DIV> </DIV>
<DIV><FONT face="Courier New">controller T1 0/0<BR> mode
cas<BR> framing esf<BR> linecode b8zs<BR> channel-group 0
timeslots 1-20 speed 64<BR> ds0-group 20 timeslots 21-24 type
e&m-immediate-start<BR> cas-custom 20<BR></FONT></DIV>
<DIV>It all works for placing calls, except they never get routed to the correct
port on the 2400IAD because the called number does not come through with the
call. Any suggestions on how this should be set up?</DIV>
<DIV> </DIV>
<DIV><FONT face="Courier New">*Mar 19 06:44:26.039:
//-1/xxxxxxxxxxxx/DPM/dpAssociateIncomingPeerCore:<BR> Calling
Number=, Called Number=, Voice-Interface=0x64868E24,<BR>
Timeout=TRUE, Peer Encap Type=ENCAP_VOICE, Peer Search
Type=PEER_TYPE_VOICE,<BR> Peer Info
Type=DIALPEER_INFO_SPEECH<BR>*Mar 19 06:44:26.039:
//-1/xxxxxxxxxxxx/DPM/dpAssociateIncomingPeerCore:<BR> Match
Rule=DP_MATCH_PORT;<BR>*Mar 19 06:44:26.039:
//-1/xxxxxxxxxxxx/DPM/dpAssociateIncomingPeerCore:<BR>
Result=Success(0) after DP_MATCH_PORT; Incoming Dial-peer=1<BR>*Mar 19
06:44:26.039: //-1/xxxxxxxxxxxx/DPM/dpAssociateIncomingPeerSPI:exit@5931
Connection closed by foreign host.<BR></FONT></DIV>
<DIV><FONT face="Courier New"></FONT> </DIV>
<DIV><FONT face="Courier New"></FONT> </DIV>
<DIV> </DIV></BODY></HTML></FONT></FONT>