<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META content="text/html; charset=iso-8859-1" http-equiv=Content-Type>
<META name=GENERATOR content="MSHTML 8.00.6001.19258">
<STYLE></STYLE>
</HEAD>
<BODY bgColor=#ffffff>
<DIV><FONT size=2 face=Arial>I took out the channel-group 0 and configured the
pri-group, thinking maybe I needed to add the pri-group before the channe-group.
The pri-group went in fine. Then when I tried to add the channel-group I
got...</FONT></DIV>
<DIV><FONT size=2 face=Arial></FONT> </DIV>
<DIV><FONT size=2 face="Courier New">glassdoctor(config-controller)#pri-group
timeslots 23-24<BR>glassdoctor(config-controller)#channel-group 0 timeslots
1-22<BR>%Channel-groups per port limit exceeded<BR>%Insufficient resources to
create channel group<BR></FONT></DIV>
<DIV><FONT size=2 face=Arial>Is there some sort of per-port or per-card limit on
the number of channel-groups you can have on a 2400IAD, or on the WIC? I thought
it allowed at least 2 per port. There is another t1 port on this card that also
has a channel-group configured, but I haven't been touching that and thought it
didn't matter. The config for both ports on the card is actually --</FONT></DIV>
<DIV><FONT size=2 face=Arial></FONT> </DIV>
<DIV><FONT size=2 face="Courier New">controller T1 0/0<BR> framing
esf<BR> linecode b8zs<BR> channel-group 0 timeslots 1-22 speed
64<BR>!<BR>controller T1 1/0<BR> framing esf<BR> linecode
b8zs<BR> channel-group 0 timeslots 1-20 speed 64<BR>!<BR></FONT><FONT
size=2 face=Arial></DIV></FONT>
<BLOCKQUOTE
style="BORDER-LEFT: #000000 2px solid; PADDING-LEFT: 5px; PADDING-RIGHT: 0px; MARGIN-LEFT: 5px; MARGIN-RIGHT: 0px">
<DIV style="FONT: 10pt arial">----- Original Message ----- </DIV>
<DIV
style="FONT: 10pt arial; BACKGROUND: #e4e4e4; font-color: black"><B>From:</B>
<A title=mays@win.net href="mailto:mays@win.net">Joseph Mays</A> </DIV>
<DIV style="FONT: 10pt arial"><B>To:</B> <A title=cisco-voip@puck.nether.net
href="mailto:cisco-voip@puck.nether.net">cisco-voip@puck.nether.net</A> </DIV>
<DIV style="FONT: 10pt arial"><B>Sent:</B> Friday, July 27, 2012 2:31 PM</DIV>
<DIV style="FONT: 10pt arial"><B>Subject:</B> [cisco-voip] PRI channels not
available</DIV>
<DIV><BR></DIV>
<DIV><FONT size=2 face=Arial>I have an IAD2400 with a channel group using 22
channels on one interface.</FONT></DIV>
<DIV><FONT size=2 face=Arial></FONT><FONT size=2
face=Arial></FONT> </DIV>
<DIV><FONT size=2 face="Courier New">Cisco IOS Software, 2400 Software
(C2400-IS-M), Version 12.3(11)T10, RELEASE SOFTWARE (fc4)<BR>Technical
Support: </FONT><A href="http://www.cisco.com/techsupport"><FONT size=2
face="Courier New">http://www.cisco.com/techsupport</FONT></A><BR><FONT size=2
face="Courier New">Copyright (c) 1986-2006 by Cisco Systems, Inc.<BR>Compiled
Fri 03-Mar-06 17:49 by dchih</FONT></DIV>
<DIV><FONT size=2 face="Courier New"></FONT> </DIV>
<DIV><FONT size=2 face="Courier New">ROM: System Bootstrap, Version
12.3(7r)T2, RELEASE SOFTWARE (fc1)</FONT></DIV>
<DIV><FONT size=2 face="Courier New"></FONT> </DIV>
<DIV><FONT size=2 face="Courier New">glassdoctor uptime is 6 days, 7 hours, 5
minutes<BR>System returned to ROM by power-on<BR>System image file is
"flash:current.bin"</FONT></DIV>
<DIV><FONT size=2 face="Courier New"></FONT> </DIV>
<DIV><FONT size=2 face="Courier New">Cisco IAD2431 (R527x) processor (revision
4.1) with 119808K/11264K bytes of memory.<BR>Processor board ID
FHK1046F3JE<BR>R527x CPU at 225MHz, Implementation 40, Rev 3.1<BR>1 On-Board
Eight FXS Analog Voice Module V2.1<BR>1 FastEthernet interface<BR>2 Serial
interfaces<BR>2 Channelized T1/PRI ports<BR>DRAM configuration is 64 bits wide
with parity disabled.<BR>63K bytes of non-volatile configuration
memory.<BR>System fpga version is 250027<BR>System readonly fpga version is
250025<BR>Option for system fpga is 'system'.<BR>62720K bytes of ATA System
CompactFlash (Read/Write)<BR>0K bytes of ATA Slot0 CompactFlash
(Read/Write)</FONT></DIV>
<DIV><FONT size=2 face="Courier New"></FONT> </DIV>
<DIV><FONT size=2 face="Courier New">Configuration register is
0x2102</FONT></DIV>
<DIV><FONT size=2 face=Arial></FONT> </DIV>
<DIV><FONT size=2 face=Arial>I want to use the remaining 2 channels for a
pri-group for, essentially, one analog voice line.</FONT></DIV>
<DIV><FONT size=2 face=Arial></FONT> </DIV>
<DIV><FONT size=2 face="Courier New">controller T1 0/0<BR> framing
esf<BR> linecode b8zs<BR> channel-group 0 timeslots 1-22 speed
64<BR></FONT><FONT size=2></FONT></DIV>
<DIV><FONT size=2 face=Arial>But it won't let me enter the pri-group
definition under the controller. Whenever I try it says no resources are
available. </FONT></DIV>
<DIV><FONT size=2 face=Arial></FONT> </DIV>
<DIV><FONT size=2 face="Courier New">glassdoctor(config-controller)#pri-group
timeslots 23-24<BR>%Channel-group already created. No more
resource<BR>glassdoctor(config-controller)#<BR></FONT></DIV>
<DIV><FONT size=2 face=Arial>I have done this before. Why would it not be
allowing me to create the pri-group now?</FONT></DIV>
<DIV><FONT size=2 face=Arial></FONT> </DIV>
<DIV><FONT size=2 face=Arial> </DIV></FONT>
<P>
<HR>
<P></P>_______________________________________________<BR>cisco-voip mailing
list<BR>cisco-voip@puck.nether.net<BR>https://puck.nether.net/mailman/listinfo/cisco-voip<BR></BLOCKQUOTE></BODY></HTML>