thanks for that Ted, but all my test phones were here in the lab all in one Device Pool with SRST feature enabled.<br>and as said, though the link shows that 2911 supports 50 but i had 27.<br><br>just to add, we have the paper license card for these 2911 which mention 25 seat SRST/CME license. only wanted to confrim and see this value inside from the CLI. also we are going to implement a 2951 box which have these licenses installed again but the papar card is God knows where. <br>
<br>thats why i wanted to see what is the exact number.<br><br><div class="gmail_quote">On 12 September 2012 17:51, Ted Nugent <span dir="ltr"><<a href="mailto:tednugent73@gmail.com" target="_blank">tednugent73@gmail.com</a>></span> wrote:<br>
<blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex"><div>This doc also shows you the max supported in SRST per hardware platform. If some phones didn't register. Confirm that the device pools have the proper SRST reference and check the phone and see if the phone shows the SRST IP as a choice after your CM servers: Device Configuration>CM Config>CM servers, you can also see this via the phones HTTP page.</div>
<div> </div><div><a href="http://www.cisco.com/en/US/docs/voice_ip_comm/cusrst/requirements/guide/srs86spc.htm" target="_blank">http://www.cisco.com/en/US/docs/voice_ip_comm/cusrst/requirements/guide/srs86spc.htm</a></div>
<div class="HOEnZb"><div class="h5"><div><br><br> </div>
<div class="gmail_quote">On Wed, Sep 12, 2012 at 12:11 PM, Lelio Fulgenzi <span dir="ltr"><<a href="mailto:lelio@uoguelph.ca" target="_blank">lelio@uoguelph.ca</a>></span> wrote:<br><blockquote style="margin:0px 0px 0px 0.8ex;padding-left:1ex;border-left-color:rgb(204,204,204);border-left-width:1px;border-left-style:solid" class="gmail_quote">
<div><div style="font-family:Verdana;font-size:10pt">Thanks Nate. Didn't know they customized the max e-phones for each platform.<br><br>Also, just as an aside, just cause it says it can do X, depending on memory, it might not be able to do it. Unfortunately, there is no memory calculator for the routers, so you really only know you need more memory when it tells you. :(<div>
<br><span><br><span name="x"></span>---<br>Lelio Fulgenzi, B.A.<br>Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1<br>(519) 824-4120 x56354 (519) 767-1060 FAX (ANNU)<br>^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^<br>
Cooking with unix is easy. You just sed it and forget it. <br> - LFJ (with apologies to Mr. Popeil)<br><span name="x"></span><br></span><br><hr></div><b>From: </b>"Nate VanMaren" <<a href="mailto:VanMarenNP@ldschurch.org" target="_blank">VanMarenNP@ldschurch.org</a>><br>
<b>To: </b>"Lelio Fulgenzi" <<a href="mailto:lelio@uoguelph.ca" target="_blank">lelio@uoguelph.ca</a>>, "abbas Wali" <<a href="mailto:abbaseo@gmail.com" target="_blank">abbaseo@gmail.com</a>><br>
<b>Cc: </b><a href="mailto:cisco-voip@puck.nether.net" target="_blank">cisco-voip@puck.nether.net</a><br><b>Sent: </b>Wednesday, September 12, 2012 12:07:50 PM<br><b>Subject: </b>RE: [cisco-voip] CME-SRST or SRST license on 2911<div>
<div><br><br>
<div>
<p class="MsoNormal"><span style="color:rgb(31,73,125);font-family:"Calibri","sans-serif";font-size:11pt">But to find out how many phones the router can support, regardless of your RTU license,</span></p>
<p class="MsoNormal"><span style="color:rgb(31,73,125);font-family:"Calibri","sans-serif";font-size:11pt"> </span></p>
<p class="MsoNormal"><span style="color:rgb(31,73,125);font-family:"Calibri","sans-serif";font-size:11pt">(config)#call-manager-fallback
</span></p>
<p class="MsoNormal"><span style="color:rgb(31,73,125);font-family:"Calibri","sans-serif";font-size:11pt">(config-cm-fallback)#max-ephones ?</span></p>
<p class="MsoNormal"><span style="color:rgb(31,73,125);font-family:"Calibri","sans-serif";font-size:11pt"> <1-110> Maximum phones to support</span></p>
<p class="MsoNormal"><span style="color:rgb(31,73,125);font-family:"Calibri","sans-serif";font-size:11pt"> </span></p>
<p class="MsoNormal"><span style="color:rgb(31,73,125);font-family:"Calibri","sans-serif";font-size:11pt">So this CISCO 2921 running c2900-universalk9-mz.SPA.151-4.M3.bin can do 110 phones.</span></p>
<p class="MsoNormal"><span style="color:rgb(31,73,125);font-family:"Calibri","sans-serif";font-size:11pt"> </span></p>
<p class="MsoNormal"><span style="color:rgb(31,73,125);font-family:"Calibri","sans-serif";font-size:11pt"> </span></p>
<div>
<div style="border-width:1pt medium medium;border-style:solid none none;border-color:rgb(181,196,223) currentColor currentColor;padding:3pt 0in 0in">
<p class="MsoNormal"><b><span style="font-family:"Tahoma","sans-serif";font-size:10pt">From:</span></b><span style="font-family:"Tahoma","sans-serif";font-size:10pt"> <a href="mailto:cisco-voip-bounces@puck.nether.net" target="_blank">cisco-voip-bounces@puck.nether.net</a> [mailto:<a href="mailto:cisco-voip-bounces@puck.nether.net" target="_blank">cisco-voip-bounces@puck.nether.net</a>]
<b>On Behalf Of </b>Lelio Fulgenzi<br>
<b>Sent:</b> Wednesday, September 12, 2012 10:04 AM<br>
<b>To:</b> abbas Wali<br>
<b>Cc:</b> <a href="mailto:cisco-voip@puck.nether.net" target="_blank">cisco-voip@puck.nether.net</a><br>
<b>Subject:</b> Re: [cisco-voip] CME-SRST or SRST license on 2911</span></p>
</div>
</div>
<p class="MsoNormal"> </p>
<div>
<p style="margin-bottom:12pt" class="MsoNormal"><span style="font-family:"Verdana","sans-serif";font-size:10pt">I'm pretty sure that at the current time, i.e. most up to date IOS, (can't remember which IOS v it changed in) SRST is honour based.
It will start with a temporary license but after so many days it will turn into permanent license.<br>
<br>
There was a point in time where it went from honour to license file, but that was short lived.
<br>
<br>
I believe they call it right to use. <br>
<br>
---<br>
Lelio Fulgenzi, B.A.<br>
Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1<br>
(519) 824-4120 x56354 (519) 767-1060 FAX (ANNU)<br>
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^<br>
Cooking with unix is easy. You just sed it and forget it. <br>
- LFJ (with apologies to Mr. Popeil)<br>
<br>
</span></p>
<div style="text-align:center" class="MsoNormal" align="center"><span style="font-family:"Verdana","sans-serif";font-size:10pt">
<hr align="center" size="2" width="100%">
</span></div>
<p class="MsoNormal"><b><span style="font-family:"Verdana","sans-serif";font-size:10pt">From:
</span></b><span style="font-family:"Verdana","sans-serif";font-size:10pt">"abbas Wali" <<a href="mailto:abbaseo@gmail.com" target="_blank">abbaseo@gmail.com</a>><br>
<b>To: </b><a href="mailto:cisco-voip@puck.nether.net" target="_blank">cisco-voip@puck.nether.net</a><br>
<b>Sent: </b>Wednesday, September 12, 2012 11:58:24 AM<br>
<b>Subject: </b>[cisco-voip] CME-SRST or SRST license on 2911<br>
<br>
Hi all,<br>
<br>
I am unable to locate the number of licenses to support phones in SRST. They said its already been installed on the system.
<br>
I checked and the router does support 27 phones when in SRST but where exactly i can find in the config how mnay phones it can support.<br>
<br>
my show license tells me<br>
<br>
<br>
<b>-r-shfg01-01#show license feature <br>
Feature name Enforcement Evaluation Subscription Enabled<br>
ipbasek9 no no no yes <br>
securityk9 yes yes no yes <br>
uck9 yes yes no yes <br>
datak9 yes yes no no <br>
gatekeeper yes yes no no <br>
SSL_VPN yes yes no no <br>
ios-ips-update yes yes yes no <br>
SNASw yes yes no no <br>
hseck9 yes no no no </b><br clear="all">
<br>
<br>
thanks in advance<br>
-- <br>
<br>
<br>
_______________________________________________<br>
cisco-voip mailing list<br>
<a href="mailto:cisco-voip@puck.nether.net" target="_blank">cisco-voip@puck.nether.net</a><br>
<a href="https://puck.nether.net/mailman/listinfo/cisco-voip" target="_blank">https://puck.nether.net/mailman/listinfo/cisco-voip</a></span></p>
</div>
</div>
</div></div></div></div><br>_______________________________________________<br>
cisco-voip mailing list<br>
<a href="mailto:cisco-voip@puck.nether.net" target="_blank">cisco-voip@puck.nether.net</a><br>
<a href="https://puck.nether.net/mailman/listinfo/cisco-voip" target="_blank">https://puck.nether.net/mailman/listinfo/cisco-voip</a><br>
<br></blockquote></div><br>
</div></div><br>_______________________________________________<br>
cisco-voip mailing list<br>
<a href="mailto:cisco-voip@puck.nether.net">cisco-voip@puck.nether.net</a><br>
<a href="https://puck.nether.net/mailman/listinfo/cisco-voip" target="_blank">https://puck.nether.net/mailman/listinfo/cisco-voip</a><br>
<br></blockquote></div><br><br clear="all"><br>-- <br><font style="font-family:comic sans ms,sans-serif;color:rgb(51,102,255)" size="4"><span style="color:rgb(0,0,153)">@bbas.. </span><br><span><span style="background-color:rgb(255,0,0)"></span></span></font><br>