<div dir="ltr">if you had a software package where you can script a Sh cdp nei and show power inline that might be an easy way to figure it out? But that's the best I can think.<div><br></div><div style>Scott</div></div>
<div class="gmail_extra"><br><br><div class="gmail_quote">On Wed, Feb 27, 2013 at 1:21 PM, Nate VanMaren <span dir="ltr"><<a href="mailto:VanMarenNP@ldschurch.org" target="_blank">VanMarenNP@ldschurch.org</a>></span> wrote:<br>
<blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">Yeah I know about show power inline. I am trying no not have to shell in to a couple hundred switches to get status on thousands of phones.<br>
<br>
Thanks<br>
<span class="HOEnZb"><font color="#888888">-Nate<br>
</font></span><div class="HOEnZb"><div class="h5">-----Original Message-----<br>
From: MManly@TEP.com [mailto:<a href="mailto:MManly@TEP.com">MManly@TEP.com</a>]<br>
Sent: Wednesday, February 27, 2013 2:10 PM<br>
To: Nate VanMaren; <a href="mailto:cisco-voip@puck.nether.net">cisco-voip@puck.nether.net</a><br>
Subject: RE: POE vs local power cube<br>
<br>
If Web access is enabled on the phone, you can click on the IP address of the phone, then Network, scroll down to locate the IP Address of the CDP neighbor and switchport, then log into the switch and issue "sho power inline <switchport/#><br>
<br>
#sho pow inline g1/0/24<br>
Interface Admin Oper Power Device Class Max<br>
(Watts)<br>
--------- ------ ---------- ------- ------------------- ----- ----<br>
Gi1/0/24 auto on 12.0 IP Phone 7965 3 30.0<br>
<br>
Interface AdminPowerMax AdminConsumption<br>
(Watts) (Watts)<br>
---------- --------------- --------------------<br>
<br>
Gi1/0/24 30.0 30.0<br>
<br>
Or, show power inline and you will see something like this:<br>
<br>
#sho pow in<br>
<br>
Module Available Used Remaining<br>
(Watts) (Watts) (Watts)<br>
------ --------- -------- ---------<br>
1 1440.0 217.3 1222.7<br>
Interface Admin Oper Power Device Class Max<br>
(Watts)<br>
--------- ------ ---------- ------- ------------------- ----- ----<br>
Gi1/0/1 auto on 12.0 IP Phone 7965 3 30.0<br>
Gi1/0/2 auto off 0.0 n/a n/a 30.0<br>
Gi1/0/3 auto off 0.0 n/a n/a 30.0<br>
Gi1/0/4 auto off 0.0 n/a n/a 30.0<br>
Gi1/0/5 auto off 0.0 n/a n/a 30.0<br>
Gi1/0/6 auto off 0.0 n/a n/a 30.0<br>
Gi1/0/7 auto off 0.0 n/a n/a 30.0<br>
Gi1/0/8 auto off 0.0 n/a n/a 30.0<br>
Gi1/0/9 auto on 12.0 IP Phone 7965 3 30.0<br>
Gi1/0/10 auto off 0.0 n/a n/a 30.0<br>
Gi1/0/11 auto on 12.0 IP Phone 7965 3 30.0<br>
Gi1/0/12 auto off 0.0 n/a n/a 30.0<br>
<br>
FLG-ADM-3750-A1#<br>
-----Original Message-----<br>
From: <a href="mailto:cisco-voip-bounces@puck.nether.net">cisco-voip-bounces@puck.nether.net</a> [mailto:<a href="mailto:cisco-voip-bounces@puck.nether.net">cisco-voip-bounces@puck.nether.net</a>] On Behalf Of Nate VanMaren<br>
Sent: Wednesday, February 27, 2013 1:45 PM<br>
To: <a href="mailto:cisco-voip@puck.nether.net">cisco-voip@puck.nether.net</a><br>
Subject: [cisco-voip] POE vs local power cube<br>
<br>
Is there any way to query from the phone if it's using POE or a power cube?<br>
<br>
Thanks<br>
-Nate<br>
<br>
<br>
NOTICE: This email message is for the sole use of the intended recipient(s) and may contain confidential and privileged information. Any unauthorized review, use, disclosure or distribution is prohibited. If you are not the intended recipient, please contact the sender by reply email and destroy all copies of the original message.<br>
<br>
<br>
_______________________________________________<br>
cisco-voip mailing list<br>
<a href="mailto:cisco-voip@puck.nether.net">cisco-voip@puck.nether.net</a><br>
<a href="https://puck.nether.net/mailman/listinfo/cisco-voip" target="_blank">https://puck.nether.net/mailman/listinfo/cisco-voip</a><br>
<br>
<br>
NOTICE: This email message is for the sole use of the intended recipient(s) and may contain confidential and privileged information. Any unauthorized review, use, disclosure or distribution is prohibited. If you are not the intended recipient, please contact the sender by reply email and destroy all copies of the original message.<br>
<br>
<br>
_______________________________________________<br>
cisco-voip mailing list<br>
<a href="mailto:cisco-voip@puck.nether.net">cisco-voip@puck.nether.net</a><br>
<a href="https://puck.nether.net/mailman/listinfo/cisco-voip" target="_blank">https://puck.nether.net/mailman/listinfo/cisco-voip</a><br>
</div></div></blockquote></div><br></div>