<div dir="ltr"><div>I'm going to end up increasing the maximum participants on the hardware CFB.  It works and there is no messing around with MRGLs.</div><div> </div><div>I can think of a number of ways to do what I want to do in a secure manner but it requires on premesis conferencing or UCCX as suggested.</div>
</div><div class="gmail_extra"><br><br><div class="gmail_quote">On Mon, Apr 1, 2013 at 12:58 PM, Wes Sisk <span dir="ltr"><<a href="mailto:wsisk@cisco.com" target="_blank">wsisk@cisco.com</a>></span> wrote:<br><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">
<div style="word-wrap:break-word">I'm not aware of anything inside CUCM that allows the same device to differentiate MRGL for adhoc vs. meet me.<div><br></div><div>I have worked with a few patterns who wanted this in the past. We sent them down the route of a custom application. Something like a UCCX custom application. Use a telephony trigger that invokes a script that remote controls a dedicated phone and initiates the conference.</div>
<div><br></div><div>-wes</div><div><br><div><div>On Apr 1, 2013, at 1:34 PM, Erick Wellnitz <<a href="mailto:ewellnitzvoip@gmail.com" target="_blank">ewellnitzvoip@gmail.com</a>> wrote:</div><br><div dir="ltr"><div>
I think that would work but we have to be able to initiate from the phone of any IT person.  </div><div> </div><div>My ideal outcome is:</div><div>From any phone go off hook, press meetme, dial conference number - conference uses software CFB.</div>

<div>From any phone initiate an ad-hoc conference - conference uses hardware CFB.</div><div>I haven't found a way to do this but it was an idea that I thought I should investigate.</div><div> </div><div> I can always set the maximum conference-participants on the IOS CFB higher but that would also allow an ad-hoc conference to have more participants.</div>

<div> </div><div> </div></div><div class="gmail_extra"><br><br><div class="gmail_quote">On Mon, Apr 1, 2013 at 12:19 PM, Wes Sisk <span dir="ltr"><<a href="mailto:wsisk@cisco.com" target="_blank">wsisk@cisco.com</a>></span> wrote:<br>

<blockquote style="margin:0px 0px 0px 0.8ex;padding-left:1ex;border-left-color:rgb(204,204,204);border-left-width:1px;border-left-style:solid" class="gmail_quote">For some reason I thought this was possible by initiating the meet me from a dedicated device (phone/cipc) that uses a specific MRGL?<br>


<br>
This is quite fuzzy to me so I am more than willing to be wrong. Just sharing an idea.<br>
<br>
-wes<br>
<br>
On Apr 1, 2013, at 1:14 PM, Erick Wellnitz <<a href="mailto:ewellnitzvoip@gmail.com" target="_blank">ewellnitzvoip@gmail.com</a>> wrote:<br>
<br>
Hello all!<br>
<br>
I have a situation where i need to make my meet-me numbers use a specific CFB resource, specifically a software CFB.  My problem arises because I want ad-hoc conferences to keep using the hardware CFB so changing the order of MRG in the MRGL assigned to phones is out.<br>


<br>
Any ideas are greatly appreciated.<br>
<br>
Thanks in advance!<br>
<br>
Erick<br>
_______________________________________________<br>
cisco-voip mailing list<br>
<a href="mailto:cisco-voip@puck.nether.net" target="_blank">cisco-voip@puck.nether.net</a><br>
<a href="https://puck.nether.net/mailman/listinfo/cisco-voip" target="_blank">https://puck.nether.net/mailman/listinfo/cisco-voip</a><br>
<br>
</blockquote></div><br></div>
</div><br></div></div></blockquote></div><br></div>