<html>
<head>
<style><!--
.hmmessage P
{
margin:0px;
padding:0px
}
body.hmmessage
{
font-size: 12pt;
font-family:Calibri
}
--></style></head>
<body class='hmmessage'><div dir='ltr'><div>thanks for response ...</div>dears please find the attached error and the scenario and the routers configurations ...<br><br><div><div id="SkyDrivePlaceholder"></div>> From: Zoltan.Kelemen@Emerson.com<br>> To: Dana_Tong@bridgepoint.com.au; anooos12168@hotmail.com; cisco-voip@puck.nether.net<br>> Date: Tue, 2 Apr 2013 22:29:22 +0000<br>> Subject: RE: [cisco-voip] Integration cisco router 2911 with Ericsson pbx<br>> <br>> Dana, for me it seems it's just Ericsson to Ericsson with an IP tie line. If it's SIP of H.323 there's no need for a CUCM whatsoever in between.<br>> <br>> Anas, can you share output from q931 debugs?<br>> Are you sure that the numbers you are sending in towards the called PBX are in the right format for that PBX to accept?<br>> Ex. You may be sending five digits to the PBX when the PBX expects four only, or vice versa.<br>> <br>> Cheers,<br>> <br>> Zoltan Kelemen<br>> ETS & Information Security <br>> Implementation Engineering<br>> w: +40 374 132356 | m: +40 757 039093<br>> <br>> <br>> -----Original Message-----<br>> From: cisco-voip-bounces@puck.nether.net [mailto:cisco-voip-bounces@puck.nether.net] On Behalf Of Dana Tong<br>> Sent: Wednesday, April 03, 2013 12:45 AM<br>> To: ANAS ALMOKAYYAD; cisco-voip@puck.nether.net<br>> Subject: Re: [cisco-voip] Integration cisco router 2911 with Ericsson pbx<br>> <br>> Hi there,<br>> <br>> Not so much information there but having a guess. Assuming you have Cisco IP phones calling Ericsson phones via Qsig integration? Or is it CUCM in the middle with MGCP gateways providing IP tie-lines for Ericsson PBXs?<br>> <br>> What is the exact topology? Is the problem with calls from Cisco IP phones to Ericsson phones?<br>> Or is the topology just Ericsson to Ericsson over IP with CUCM in the middle providing the call control?<br>> <br>> If the problem for example is calls from Ericsson to Cisco IP phones, have you checked the inbound CSS on the MGCP gateway? <br>> <br>> If the problem is the other direction, perhaps you need to configure overlap send/ receive? Are the numbers in the correct format? What about type/ plan?<br>> <br>> Cheers<br>> Dana<br>> <br>> -----Original Message-----<br>> From: cisco-voip-bounces@puck.nether.net [mailto:cisco-voip-bounces@puck.nether.net] On Behalf Of ANAS ALMOKAYYAD<br>> Sent: Wednesday, 3 April 2013 7:19 AM<br>> To: cisco-voip@puck.nether.net<br>> Subject: [cisco-voip] Integration cisco router 2911 with Ericsson pbx<br>> <br>> Dears <br>> <br>> I face a problem when i integrate 2911 e1 card with Ericsson pbx in two different site to call each other through vpn I used isdn qsig to integration ....<br>> Channels all up and i get tone from router but when i called another site its fail... <br>> when i debug the call it show me "invalid format number" incomplete number ... <br>> Any one have an idea about cause of this error ...<br>> _______________________________________________<br>> cisco-voip mailing list<br>> cisco-voip@puck.nether.net<br>> https://puck.nether.net/mailman/listinfo/cisco-voip<br>> <br>> _______________________________________________<br>> cisco-voip mailing list<br>> cisco-voip@puck.nether.net<br>> https://puck.nether.net/mailman/listinfo/cisco-voip<br></div> </div></body>
</html>