<div dir="ltr">Hi Fred,<div><br></div><div style>When you downed <font face="arial, sans-serif">Se0/0/0:23, you downed 1 channel on the PRI. leaving the other 23 channels up. The PRI was still up. You just downed the channel that has the D-Channel on it. The reason it came backup is your Service providor received an alarm on they're side showing your PRI was down. I'm assuming after a unspecified amount of time, they bounced the entire PRI to bring the channels back up. (That would the the AIS detected message, it's a test message)</font></div>
<div style><font face="arial, sans-serif"><br></font></div><div style><font face="arial, sans-serif">Downing the controller is the correct way to do this/</font></div><div style><font face="arial, sans-serif"><br></font></div>
<div style><font face="arial, sans-serif">Mike</font></div></div><div class="gmail_extra"><br><br><div class="gmail_quote">On Wed, Apr 10, 2013 at 4:14 PM, Fred Hunt <span dir="ltr"><<a href="mailto:FHunt@erdman.com" target="_blank">FHunt@erdman.com</a>></span> wrote:<br>
<blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">
<div lang="EN-US" link="blue" vlink="purple">
<div>
<p class="MsoNormal">I’m trying to figure out why a serial interface seemingly changed its state on its own.<u></u><u></u></p>
<p class="MsoNormal"><br>
We have a PRI that we are planning to decommission. I previously removed it from being routed to in CUCM and I shut down the serial0/0/0:23 interface, as shown in the log below:<u></u><u></u></p>
<p class="MsoNormal">021241: Mar 16 20:32:48.963 CDT: %ISDN-6-LAYER2DOWN: Layer 2 for Interface Se0/0/0:23, TEI 0 changed to down<u></u><u></u></p>
<p class="MsoNormal">021242: Mar 16 20:32:50.960 CDT: %LINK-5-CHANGED: Interface Serial0/0/0:23, changed state to administratively down<u></u><u></u></p>
<p class="MsoNormal"><u></u> <u></u></p>
<p class="MsoNormal">Then, somehow the serial interface changed its state back to up. This occurred after what appeared to be a brief outage of the T1 service. Here’s the relevant log detail:<u></u><u></u></p>
<p class="MsoNormal">021244: Mar 18 10:25:16.673 CDT: %CONTROLLER-5-UPDOWN: Controller T1 0/0/0, changed state to down (AIS detected)<u></u><u></u></p>
<p class="MsoNormal">021245: Mar 18 10:25:16.881 CDT: %MARS_NETCLK-3-HOLDOVER: Entering Holdover for Controller T1 0/0/0<u></u><u></u></p>
<p class="MsoNormal">021246: Mar 18 10:25:18.673 CDT: %LINK-3-UPDOWN: Interface Serial0/0/0:23, changed state to down<u></u><u></u></p>
<p class="MsoNormal">021247: Mar 18 10:25:20.673 CDT: %CONTROLLER-5-UPDOWN: Controller T1 0/0/0, changed state to up<u></u><u></u></p>
<p class="MsoNormal">021248: Mar 18 10:25:22.189 CDT: %LINK-3-UPDOWN: Interface Serial0/0/0:23, changed state to up<u></u><u></u></p>
<p class="MsoNormal">021249: Mar 18 10:25:23.133 CDT: %MARS_NETCLK-3-HOLDOVER: Exiting Holdover for Controller T1 0/0/0<u></u><u></u></p>
<p class="MsoNormal">021250: Mar 18 10:25:24.917 CDT: %ISDN-6-LAYER2UP: Layer 2 for Interface Se0/0/0:23, TEI 0 changed to up<u></u><u></u></p>
<p class="MsoNormal"><u></u> <u></u></p>
<p class="MsoNormal">Today, I discovered that the interface was up and shut it down again. Then I decided to shutdown the controller itself. Here’s the log:<u></u><u></u></p>
<p class="MsoNormal">021310: Apr 10 13:57:23.272 CDT: %LINK-5-CHANGED: Interface Serial0/0/0:23, changed state to administratively down<u></u><u></u></p>
<p class="MsoNormal">021312: Apr 10 14:13:28.404 CDT: %CONTROLLER-5-UPDOWN: Controller T1 0/0/0, changed state to administratively down<u></u><u></u></p>
<p class="MsoNormal">021313: Apr 10 14:13:28.424 CDT: %MARS_NETCLK-3-HOLDOVER: Entering Holdover for Controller T1 0/0/0<u></u><u></u></p>
<p class="MsoNormal">021314: Apr 10 14:13:30.404 CDT: %LINK-3-UPDOWN: Interface Serial0/0/0:23, changed state to down<u></u><u></u></p>
<p class="MsoNormal"><u></u> <u></u></p>
<p class="MsoNormal">I observed that after shutting the controller down the state of serial0/0/0:23 changed from administratively down to down. I’m guessing that this will stick now, but I’m not sure after the earlier behavior. I don’t understand how the
serial interface was able to previously change its layer 1 state on its own. Don’t both administratively down and down mean down at the layer 1 level? Does a router automatically reset the state of serial interfaces if their associated T1 controller changes
from the down to up state?<u></u><u></u></p>
<p class="MsoNormal"><u></u> <u></u></p>
<p class="MsoNormal">Thanks,<u></u><u></u></p>
<p class="MsoNormal">Fred<u></u><u></u></p>
</div>
</div>
<br>_______________________________________________<br>
cisco-voip mailing list<br>
<a href="mailto:cisco-voip@puck.nether.net">cisco-voip@puck.nether.net</a><br>
<a href="https://puck.nether.net/mailman/listinfo/cisco-voip" target="_blank">https://puck.nether.net/mailman/listinfo/cisco-voip</a><br>
<br></blockquote></div><br></div>