<div dir="ltr"><div>Simple question I just need a refresher.</div><div> </div><div>On my CUBE, if I translate-outgoing called xxxx on the dial peer does my destination pattern need to match the original number or the translated number? The dial peer guides are not quite clear in my mind. </div>
<div> </div><div>Here is my dial peer and my translation rule.</div><div> </div><div>voice translation-rule 4000</div><div> rule 1 /^\+/ /9/</div><div>***replacing the + globalization with 9 for outbound PSTN access</div>
<div> </div><div>dial-peer voice 4000 voip<br> description Inbound Toll Bypass from XXXXX<br> translate-outgoing called 4000<br> preference 1<br> destination-pattern +16304###### <-----should this be 916304######?<br>
session protocol sipv2<br> session-taaget ipv4:<a href="http://172.16.7.12:5070">172.16.7.12:5070</a><br> incoming called-number +16304######<br> dtmf-relay rtp-nte<br> codec g711ulaw</div><div> </div><div>Thanks in advance!</div>
</div>