<html><head><meta http-equiv="content-type" content="text/html; charset=utf-8"></head><body dir="auto"><div>Sigh.. They changed their tune, internals work ok. Just offnet are broke. </div><div><br></div><div>I specifically asked them to disable ECM if it got turned on, and suggested they try some normal voice calls using the fax machine to verify that some sort of audio is getting set up</div><div><br>Sent from my iPhone</div><div><br>On Jun 13, 2013, at 9:59 AM, Scott Voll <<a href="mailto:svoll.voip@gmail.com">svoll.voip@gmail.com</a>> wrote:<br><br></div><blockquote type="cite"><div><div dir="ltr">Ed--<div><br></div><div style="">Did any of your Faxes get replaced? Sound like you might have gotten a new Fax with Super G3 and ECM turned on. YMMV.</div><div style=""><br></div><div style="">Scott</div></div><div class="gmail_extra">
<br><br><div class="gmail_quote">On Thu, Jun 13, 2013 at 5:56 AM, Ed Leatherman <span dir="ltr"><<a href="mailto:ealeatherman@gmail.com" target="_blank">ealeatherman@gmail.com</a>></span> wrote:<br><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">
<div dir="ltr">Good morning!<div><br></div><div>I have a remote campus with 1 VG224 (SCCP controlled) and a handful of ATA's for analog service to fax machines etc.</div><div><br></div><div>IT staff on-site is complaining now that faxes on the VG can no longer send faxes (they fail usually during the first page), whereas faxes via ATA are ok oddly enough.</div>
<div><br></div><div>Kicker to me is they've also stated that even faxes between two devices on the VG224 are having the same issue.</div><div><br></div><div>To me this along with the ATA's actually working OK seems to make a PRI or network issue less likely although not ruling it out in case they are just reporting things wrong to me. They also say no changes were made to gateway (which I believe cause they prob don't have the login for it) or on their CUCM.</div>
<div><br></div><div>My question though for anyone familiar with these is, if two devices on the gateway are talking to each other via FXS ports, is this signal just getting switched natively on the gateway? Is any signal conversion happening or DSP's engaged at this point, assuming there aren't any conferencing or such going on?</div>
<div><br></div><div>Thanks!</div><span class="HOEnZb"><font color="#888888"><div><div><br></div>-- <br>Ed Leatherman<br>
</div></font></span></div>
<br>_______________________________________________<br>
cisco-voip mailing list<br>
<a href="mailto:cisco-voip@puck.nether.net">cisco-voip@puck.nether.net</a><br>
<a href="https://puck.nether.net/mailman/listinfo/cisco-voip" target="_blank">https://puck.nether.net/mailman/listinfo/cisco-voip</a><br>
<br></blockquote></div><br></div>
</div></blockquote></body></html>