<div dir="ltr"><div>Thanks.<br><br><br></div><div>I've gone through plenty of cube documentation but didn't figure out if SIP endpoint can terminate directly on CUBE. Most of docs discuss about sip trunks between cube and cube/cucm/pstn etc. I read that cube support B2BUA that mean remote sip device will terminate connect on cube and then cube will initiate a separate session to internal destination sip server like cucm using its own IP address as source and media will also flow in same fashion as i draw below. As i mentioned i am not sure if cube can terminate softphone like this. The purpose is to hide the internal topology. I don't want to inject data routes in voice domain and vice versa. <br>
<br></div><div>softphone -----------------cube --------------- cucm<br><br></div><div>cisco ASA can act as proxy phone but question is can it hide the topology?<br></div><div><br></div><div>An other solution i am just thinking of but i am not sure if this is possible and practical. Can you please confirm that if cisco latest softclient like jabber or movi have built-in vpn capability? I am thinking if i setup some asa firewalls on border of voice domain. when user open jabber or movi application, it automatically establish vpn with these border firewalls and get dynamic ip address from firewall from voice ip ranges. In otherwords the softphone will be part of voice domain after vpn is established. whats your thoughts<br>
<br></div><div>Regards<br></div><div><br></div></div><div class="gmail_extra"><br><br><div class="gmail_quote">On Wed, Nov 6, 2013 at 10:53 PM, Brian Meade (brmeade) <span dir="ltr"><<a href="mailto:brmeade@cisco.com" target="_blank">brmeade@cisco.com</a>></span> wrote:<br>
<blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">
<div link="blue" vlink="purple" lang="EN-US">
<div>
<p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1f497d">I’ve done this before with Acme/Sipera SBCs with all SIP endpoints. You may be able to do this with CUBE as well (never set it up before using CUBE). Not
really going to work for SCCP endpoints unless you use Phone Proxy which only is supported in CUCM 7.x and below. You might just be able to handle it using an ASA and Anyconnect so everyone has to VPN in first.<u></u><u></u></span></p>
<p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1f497d"><u></u> <u></u></span></p>
<p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1f497d">Brian<u></u><u></u></span></p>
<p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1f497d"><u></u> <u></u></span></p>
<p class="MsoNormal"><b><span style="font-size:10.0pt;font-family:"Tahoma","sans-serif"">From:</span></b><span style="font-size:10.0pt;font-family:"Tahoma","sans-serif""> cisco-voip [mailto:<a href="mailto:cisco-voip-bounces@puck.nether.net" target="_blank">cisco-voip-bounces@puck.nether.net</a>]
<b>On Behalf Of </b>Ahmed -Y<br>
<b>Sent:</b> Wednesday, November 06, 2013 9:52 PM<br>
<b>To:</b> <a href="mailto:cisco-voip@puck.nether.net" target="_blank">cisco-voip@puck.nether.net</a><br>
<b>Subject:</b> [cisco-voip] softphone from data to voice domain<u></u><u></u></span></p><div><div class="h5">
<p class="MsoNormal"><u></u> <u></u></p>
<div>
<div>
<div>
<div>
<div>
<div>
<p class="MsoNormal" style="margin-bottom:12.0pt">Hi Guys,<u></u><u></u></p>
</div>
<p class="MsoNormal">We have a big voice domain and hundreds of deskphone share the same domain and registers with shared UC infrastructure (cucm cluster, presence, unity etc).<u></u><u></u></p>
</div>
<p class="MsoNormal">Currently not many users using softphone but lots of users requesting this facility. Since softphones are in data domain and i believe its not a good practice to mix data with voice so I am thinking to place some kind of gateway in the
between data and voice that not phone protect voice domain from data but also hide the topology. May be Cisco ASA as phone proxy but i am not sure if it is practical to use them for thousands of softphones. Moreover i doubt if ASA can provide topology hiding
when user can have CIPC, jabber or movi.<u></u><u></u></p>
</div>
<p class="MsoNormal" style="margin-bottom:12.0pt">I read about CUBE but i am still confused if cube really fit in my situation and purpose i want to achieve.<u></u><u></u></p>
</div>
<p class="MsoNormal" style="margin-bottom:12.0pt">Please share your thought. In short i want to know how service providers (provides UC shared services) keep voice and data separate while provide the softphone facility to user.<u></u><u></u></p>
</div>
<p class="MsoNormal">Regards<u></u><u></u></p>
</div>
</div></div></div>
</div>
</blockquote></div><br></div>