<div dir="ltr"><div class="gmail_default" style="font-family:tahoma,sans-serif;color:rgb(0,0,0)">nice one thanks Matt.<br></div><div class="gmail_default" style="font-family:tahoma,sans-serif;color:rgb(0,0,0)">is another solution be to use Unity 8 call handlers !! heard somewhere<br>
</div></div><div class="gmail_extra"><br><br><div class="gmail_quote">On 11 February 2014 11:06, Matthew Collins <span dir="ltr"><<a href="mailto:mcollins@block.co.uk" target="_blank">mcollins@block.co.uk</a>></span> wrote:<br>
<blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">
<div link="blue" vlink="purple" lang="EN-GB">
<div>
<p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1f497d">Hi Abbas,<u></u><u></u></span></p>
<p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1f497d"><u></u> <u></u></span></p>
<p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1f497d">Bit long winded but yes it can be done, Create another loopback address on the gateway, Set up a h323 router in CUCM using the new loopback address and send
that specific dial in number down to the H323 router. The TLC scrit can then pick up the call and route accordingly. You will also need to create a dial peer to send the public call back to the CUCM to then be routed out MGCP.<u></u><u></u></span></p>
<p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1f497d"><u></u> <u></u></span></p>
<p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1f497d">Regards<u></u><u></u></span></p>
<p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1f497d"><u></u> <u></u></span></p>
<p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1f497d">Matthew<u></u><u></u></span></p>
<p class="MsoNormal"><span style="font-size:10.0pt;font-family:"Calibri","sans-serif";color:#bcbec0"><u></u> <u></u></span></p>
<p class="MsoNormal"><span style="font-size:14.0pt;font-family:"Arial","sans-serif";color:#bcbec0">ǀ</span><span style="font-size:14.0pt;font-family:"HelveticaNeue LT 45 Light","sans-serif";color:#bcbec0">
</span><span style="font-size:14.0pt;font-family:"HelveticaNeue LT 45 Light","sans-serif";color:#e98300">BLOCK</span><span style="font-size:14.0pt;font-family:"HelveticaNeue LT 45 Light","sans-serif";color:#bcbec0">
</span><span style="font-size:14.0pt;font-family:"Arial","sans-serif";color:#bcbec0">ǀ</span><span style="font-size:14.0pt;font-family:"HelveticaNeue LT 45 Light","sans-serif";color:#1f497d"><u></u><u></u></span></p>
<p class="MsoNormal"><span style="font-size:10.0pt;font-family:"Calibri","sans-serif";color:#7f7f7f">Cisco Global EMEAR Partner of the Year 2013<u></u><u></u></span></p>
<p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1f497d"><u></u> <u></u></span></p>
<p class="MsoNormal"><b><span style="font-size:10.0pt;font-family:"Tahoma","sans-serif"" lang="EN-US">From:</span></b><span style="font-size:10.0pt;font-family:"Tahoma","sans-serif"" lang="EN-US"> abbas Wali [mailto:<a href="mailto:abbaseo@gmail.com" target="_blank">abbaseo@gmail.com</a>]
<br>
<b>Sent:</b> 11 February 2014 11:01<br>
<b>To:</b> Matthew Collins<br>
<b>Cc:</b> Buchanan, James; <a href="mailto:cisco-voip@puck.nether.net" target="_blank">cisco-voip@puck.nether.net</a></span></p><div><div class="h5"><br>
<b>Subject:</b> Re: [cisco-voip] dial into ddi and get a secondary dial tone to call a new number<u></u><u></u></div></div><p></p><div><div class="h5">
<p class="MsoNormal"><u></u> <u></u></p>
<div>
<div>
<p class="MsoNormal"><span style="font-family:"Tahoma","sans-serif"">TCL scripts on MGCP gateway ??<u></u><u></u></span></p>
</div>
</div>
<div>
<p class="MsoNormal" style="margin-bottom:12.0pt"><u></u> <u></u></p>
<div>
<p class="MsoNormal">On 11 February 2014 10:40, Matthew Collins <<a href="mailto:mcollins@block.co.uk" target="_blank">mcollins@block.co.uk</a>> wrote:<u></u><u></u></p>
<p class="MsoNormal">This can also be set up as part of Single number reach using Mobile Voice Access, You need to install a TCL script on the router. Users dial in, Prompted for extension number and pin then get secondary dial tone to dial out.<br>
<br>
Regards<br>
<br>
Matthew<u></u><u></u></p>
<div>
<div>
<p class="MsoNormal" style="margin-bottom:12.0pt"><br>
-----Original Message-----<br>
From: cisco-voip [mailto:<a href="mailto:cisco-voip-bounces@puck.nether.net" target="_blank">cisco-voip-bounces@puck.nether.net</a>] On Behalf Of Buchanan, James<br>
Sent: 11 February 2014 10:21<br>
To: abbas Wali; <a href="mailto:cisco-voip@puck.nether.net" target="_blank">cisco-voip@puck.nether.net</a><br>
Subject: Re: [cisco-voip] dial into ddi and get a secondary dial tone to call a new number<br>
<br>
Not really. Some have done this using call handlers with pre-programmed speed dials. Some have also tried changing the restriction tables in Unity to allow for this, but that has a tone of security issues. UCCX would be your best place to do this, but you would
want to make sure you secured it with a PIN.<br>
<br>
James Buchanan | Sr. Network Engineer<br>
Presidio | <a href="http://www.presidio.com" target="_blank">www.presidio.com</a><br>
12 Cadillac Drive Suite 130, Brentwood, TN 37027<br>
D: 615.866.5729 | C: 931.797.2326 | F: 615.866.5781 | <a href="mailto:jbuchanan@presidio.com" target="_blank">
jbuchanan@presidio.com</a><br>
<br>
<br>
<br>
PRESIDIO<br>
Practical thinking for a connected world.<br>
<br>
<br>
Follow Us: <a href="http://www.twitter.com/presidio" target="_blank">www.twitter.com/presidio</a><br>
<br>
<br>
<br>
<br>
________________________________________<br>
From: cisco-voip [<a href="mailto:cisco-voip-bounces@puck.nether.net" target="_blank">cisco-voip-bounces@puck.nether.net</a>] on behalf of abbas Wali [<a href="mailto:abbaseo@gmail.com" target="_blank">abbaseo@gmail.com</a>]<br>
Sent: Tuesday, February 11, 2014 4:11 AM<br>
To: <a href="mailto:cisco-voip@puck.nether.net" target="_blank">cisco-voip@puck.nether.net</a><br>
Subject: [cisco-voip] dial into ddi and get a secondary dial tone to call a new number<br>
<br>
hi all,<br>
<br>
is there a feature in CUCM 8.5 where you call into a tollfree number into cucm cluster and then from there you call out to different destinations i.e. getting a secondary dialtone after the first call connects<br>
<br>
Thanks<br>
<br>
<br>
--<br>
<br>
This message w/attachments (message) is intended solely for the use of the intended recipient(s) and may contain information that is privileged, confidential or proprietary. If you are not an intended recipient, please notify the sender, and then please delete
and destroy all copies and attachments. Please be advised that any review or dissemination of, or the taking of any action in reliance on, the information contained in or attached to this message is prohibited.<u></u><u></u></p>
</div>
</div>
<p class="MsoNormal">_______________________________________________<br>
cisco-voip mailing list<br>
<a href="mailto:cisco-voip@puck.nether.net" target="_blank">cisco-voip@puck.nether.net</a><br>
<a href="https://puck.nether.net/mailman/listinfo/cisco-voip" target="_blank">https://puck.nether.net/mailman/listinfo/cisco-voip</a><u></u><u></u></p>
</div>
<p class="MsoNormal"><br>
<br clear="all">
<br>
-- <u></u><u></u></p>
<div>
<p class="MsoNormal"><b><u><span style="font-size:13.5pt;color:#eeeeee;background:#999999">Abbas Wali</span></u></b><u></u><u></u></p>
</div>
</div>
</div></div></div>
</div>
</blockquote></div><br><br clear="all"><br>-- <br><div dir="ltr"><font style="font-family:comic sans ms,sans-serif;color:rgb(51,102,255)" size="4"><span style="color:rgb(238,238,238)"><span style="background-color:rgb(153,153,153)"><u><b><font size="4"><font face="times new roman,serif">Abbas Wali</font></font></b></u><span></span></span></span><br>
</font><div><div><font style="font-family:comic sans ms,sans-serif;color:rgb(51,102,255)" size="4"><span><span style="background-color:rgb(255,0,0)"></span></span></font></div></div></div>
</div>