<HTML><HEAD></HEAD>
<BODY dir=ltr>
<DIV dir=ltr>
<DIV style="FONT-SIZE: 12pt; FONT-FAMILY: 'Calibri'; COLOR: #000000">
<DIV>Hello Group</DIV>
<DIV> </DIV>
<DIV>we try to set up the SIP Outbounddialer with a UCCE 9.</DIV>
<DIV>The UCCE part is working and the PG is sending SIP to the Gateway. However,
the Gateway (2921 IOS 15.2(3) T4) does not accept the SIP requests.</DIV>
<DIV>The gateway is also used for PSTN calls to the CUCM. We habe dialpeers set
up to the PRI (PSTN) as well as to the CUCM (h.323).</DIV>
<DIV> </DIV>
<DIV>dial-peer voice 9900 voip</DIV>
<DIV>tone ringback alert-no-PI</DIV>
<DIV>description to CUCM PreProd</DIV>
<DIV>preference 2</DIV>
<DIV>destination-pattern 99[0-7].</DIV>
<DIV>progress_ind setup enable 3</DIV>
<DIV>session target ipv4: [CUCM IP]</DIV>
<DIV>voice-class codec 3</DIV>
<DIV>voice-class h323 1</DIV>
<DIV>dtmf-relay h245-alphanumeric</DIV>
<DIV>playout-delay nominal 50</DIV>
<DIV>no vad</DIV>
<DIV> </DIV>
<DIV>Has anyone a sample SIP configuartion of a Gateway that works with the SIP
Outbound Dialer?</DIV>
<DIV>we have added this config to the gateway</DIV>
<DIV> </DIV>
<DIV>voice service voip</DIV>
<DIV>ip address trusted list</DIV>
<DIV> ipv4 [UCCE PG IP]</DIV>
<DIV>allow-connections h323 to h323</DIV>
<DIV>allow-connections h323 to sip</DIV>
<DIV>allow-connections sip to h323</DIV>
<DIV>allow-connections sip to sip</DIV>
<DIV>sip</DIV>
<DIV> rel1xx supported 100rel</DIV>
<DIV> </DIV>
<DIV>Thanks for you help</DIV>
<DIV> </DIV>
<DIV>Reto</DIV></DIV></DIV></BODY></HTML>