<p dir="ltr">As pavan n Brian said, exact reason would be in traces. Second port cdp output referring seems pc port, so that shouldn't be a problem.</p>
<p dir="ltr">Time issue was seen in past with 69xx phone. But should be fixed in 9.4, which you are running. </p>
<div class="gmail_quote">On 11-Apr-2014 8:06 pm, "Brian Meade" <<a href="mailto:bmeade90@vt.edu">bmeade90@vt.edu</a>> wrote:<br type="attribution"><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">
<div dir="ltr">Is the phone picking up the TFTP server address? What do the status messages on the phone show? Can you get to the phone's web page and look at console logs?<div><br></div><div>It could be a dbreplication problem as well.<br>
<div><br></div><div>CallManager traces should also give some detail on why it is coming up as rejected. </div></div></div><div class="gmail_extra"><br><br><div class="gmail_quote">On Fri, Apr 11, 2014 at 10:00 AM, costas georgiou <span dir="ltr"><<a href="mailto:ckos1976@hotmail.com" target="_blank">ckos1976@hotmail.com</a>></span> wrote:<br>
<blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">
<div><div dir="ltr">HI All,<br>
<br>
I am having issues trying to register a Ciso 961 IP Phone, it comes up as rejected. I have entered the phone in CUCM. The phone is picking up a IP address, the switch configuration is correct. We have even movedit to a working port. Below is the show CDP output:<br>
<br>
Device ID: SEP44ADD9BD1D7D<br>Entry address(es):<br> IP address: 2.x.x.x<br>Platform: Cisco IP Phone 6961 , Capabilities: Host Phone Two-port Mac Relay<br>Interface: FastEthernet0/14, Port ID (outgoing port): Port 1<br>
Holdtime : 143 sec<br>Second Port Status: Down<br>
Version :<br>SCCP 9.4.1.3<br>
advertisement version: 2<br>Duplex: full<br>Power drawn: 6.000 Watts<br>Power request id: 10524, Power management id: 3<br>Power request levels are:6000 0 0 0 0<br>Management address(es):<br>
<br>
I have noticed 2nd port status is down, not sure if thi has anything to do with it. We are having a problem at the momet with 6961 where the time is out by 1 hour and they are all running the sam firmware SCCP 9.4.1.3. I am a bit stumped now, any ideas?<br>
<br>
Regards<span><font color="#888888"><br>
<br>
Costas<br><br> </font></span></div></div>
<br>_______________________________________________<br>
cisco-voip mailing list<br>
<a href="mailto:cisco-voip@puck.nether.net" target="_blank">cisco-voip@puck.nether.net</a><br>
<a href="https://puck.nether.net/mailman/listinfo/cisco-voip" target="_blank">https://puck.nether.net/mailman/listinfo/cisco-voip</a><br>
<br></blockquote></div><br></div>
<br>_______________________________________________<br>
cisco-voip mailing list<br>
<a href="mailto:cisco-voip@puck.nether.net">cisco-voip@puck.nether.net</a><br>
<a href="https://puck.nether.net/mailman/listinfo/cisco-voip" target="_blank">https://puck.nether.net/mailman/listinfo/cisco-voip</a><br>
<br></blockquote></div>