<div dir="ltr">The only that i found to make Voice VLAN work ate this device, is to map the beginning of MAC address of some phones that will be attached at this Switch. We are using at this customer 69XX series phones and CUCM 8.6.<div>
<br></div><div>This is the config:</div><div>!</div><div><div>voice vlan id 3 </div><div>voice vlan state oui-enabled </div><div>voice vlan oui-table add 28940f CISCO___________________<br></div><div>voice vlan oui-table add 44d3ca CISCO___________________</div>
<div>voice vlan oui-table add 503de5 CISCO___________________</div><div>voice vlan oui-table add 649ef3 CISCO___________________</div></div><div>!</div><div><div>interface fastethernet1/2/1</div><div> spanning-tree portfast </div>
<div> switchport trunk native vlan XX (PC VLAN) </div><div> lldp optional-tlv port-desc sys-name sys-desc sys-cap 802.3-mac-phy 802.3-lag 802.3-max-frame-size</div><div> lldp med notifications topology-change enable </div>
<div> lldp med enable network-policy poe-pse</div><div> macro description ip_phone_desktop</div><div> voice vlan enable </div><div> voice vlan cos mode all </div><div> no macro auto smartport </div><div> !next command is internal.</div>
<div> macro auto smartport dynamic_type unknown </div></div></div><div class="gmail_extra"><br clear="all"><div><div>--</div><div>Michel Perez</div><div>Skype: michelmbperez</div><div><a href="mailto:michelmbperez@gmail.com" target="_blank">michelmbperez@gmail.com</a></div>
<div><span style="font-family:Arial,Helvetica,'Nimbus Sans L',sans-serif;font-size:13px;line-height:15px"><a href="http://br.linkedin.com/in/michelmbperez" target="_blank">http://br.linkedin.com/in/michelmbperez</a></span></div>
</div>
<br><br><div class="gmail_quote">2014-05-20 15:42 GMT-03:00 Jeffrey Girard <span dir="ltr"><<a href="mailto:jeffrey.girard@girardinc.com" target="_blank">jeffrey.girard@girardinc.com</a>></span>:<br><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">
<div lang="EN-US" link="blue" vlink="purple"><div><p class="MsoNormal"><span style="font-family:"Arial","sans-serif";color:#44546a">Coy –<u></u><u></u></span></p><p class="MsoNormal"><span style="font-family:"Arial","sans-serif";color:#44546a"> That would be very helpful. I would appreciate the assistance if you could provide me that information.<u></u><u></u></span></p>
<p class="MsoNormal"><span style="font-family:"Arial","sans-serif";color:#44546a"><u></u> <u></u></span></p><p class="MsoNormal"><span style="font-family:"Arial","sans-serif";color:#44546a"> Thanks!<u></u><u></u></span></p>
<p class="MsoNormal"><span style="font-family:"Arial","sans-serif";color:#44546a"><u></u> <u></u></span></p><div><div style="border:none;border-top:solid #e1e1e1 1.0pt;padding:3.0pt 0in 0in 0in"><p class="MsoNormal">
<b><span style="font-size:11.0pt;font-family:"Calibri","sans-serif"">From:</span></b><span style="font-size:11.0pt;font-family:"Calibri","sans-serif""> <a href="mailto:coy.hile@coyhile.com" target="_blank">coy.hile@coyhile.com</a> [mailto:<a href="mailto:coy.hile@coyhile.com" target="_blank">coy.hile@coyhile.com</a>] <br>
<b>Sent:</b> Tuesday, May 20, 2014 2:41 PM<br><b>To:</b> Jeffrey Girard<br><b>Cc:</b> <a href="mailto:bmeade90@vt.edu" target="_blank">bmeade90@vt.edu</a>; Cisco VOIP (<a href="mailto:cisco-voip@puck.nether.net" target="_blank">cisco-voip@puck.nether.net</a>)</span></p>
<div><div class="h5"><br><b>Subject:</b> Re: [cisco-voip] Anyone using the Cisco 300 Series switches? Unable to get Auto Voice VLAN to work<u></u><u></u></div></div><p></p></div></div><div><div class="h5"><p class="MsoNormal">
<u></u> <u></u></p><div><p class="MsoNormal">I've used these at home and got them to work in the lab. I think I had to define LLDP profiles for the specific phones I was using as voice OUIs or some such. Been a while. I can try to grab a config and check if that would be helpful.<u></u><u></u></p>
</div><div><p class="MsoNormal">-c<br><br>Sent from my iPhone<u></u><u></u></p></div><div><p class="MsoNormal" style="margin-bottom:12.0pt"><br>On May 20, 2014, at 13:45, Jeffrey Girard <<a href="mailto:jeffrey.girard@girardinc.com" target="_blank">jeffrey.girard@girardinc.com</a>> wrote:<u></u><u></u></p>
</div><blockquote style="margin-top:5.0pt;margin-bottom:5.0pt"><div><p class="MsoNormal"><span style="font-family:"Arial","sans-serif";color:#44546a">Yes, VLAN 30 is a regular VLAN. You can make it a voice vlan unless its already created as a regular vlan</span><u></u><u></u></p>
<p class="MsoNormal"><span style="font-family:"Arial","sans-serif";color:#44546a"> </span><u></u><u></u></p><p class="MsoNormal"><span style="font-family:"Arial","sans-serif";color:#1f497d">------------------------------------------------------------------------------------</span><u></u><u></u></p>
<p class="MsoNormal"><span style="font-family:"Arial","sans-serif";color:#44546a"> </span><u></u><u></u></p><p class="MsoNormal"><b><span style="font-size:11.0pt;font-family:"Calibri","sans-serif"">From:</span></b><span style="font-size:11.0pt;font-family:"Calibri","sans-serif""> <a href="mailto:bmeade90@gmail.com" target="_blank">bmeade90@gmail.com</a> [<a href="mailto:bmeade90@gmail.com" target="_blank">mailto:bmeade90@gmail.com</a>] <b>On Behalf Of </b>Brian Meade<br>
<b>Sent:</b> Tuesday, May 20, 2014 1:44 PM<br><b>To:</b> Jeffrey Girard<br><b>Cc:</b> Cisco VOIP (<a href="mailto:cisco-voip@puck.nether.net" target="_blank">cisco-voip@puck.nether.net</a>)<br><b>Subject:</b> Re: [cisco-voip] Anyone using the Cisco 300 Series switches? Unable to get Auto Voice VLAN to work</span><u></u><u></u></p>
<p class="MsoNormal"> <u></u><u></u></p><div><p class="MsoNormal">Do you have VLAN 30 defined under VLAN Management or just under the Voice VLAN section? Make sure it's added as a regular VLAN first.<u></u><u></u></p>
</div><div><p class="MsoNormal" style="margin-bottom:12.0pt"> <u></u><u></u></p><div><p class="MsoNormal">On Tue, May 20, 2014 at 1:14 PM, Jeffrey Girard <<a href="mailto:jeffrey.girard@girardinc.com" target="_blank">jeffrey.girard@girardinc.com</a>> wrote:<u></u><u></u></p>
<blockquote style="border:none;border-left:solid #cccccc 1.0pt;padding:0in 0in 0in 6.0pt;margin-left:4.8pt;margin-top:5.0pt;margin-right:0in;margin-bottom:5.0pt"><div><div><p class="MsoNormal"><span style="font-family:"Arial","sans-serif";color:#44546a">Im playing with a SG300-10MP in a lab for a potential client purchase.</span><u></u><u></u></p>
<p class="MsoNormal"><span style="font-family:"Arial","sans-serif";color:#44546a"> </span><u></u><u></u></p><p class="MsoNormal"><span style="font-family:"Arial","sans-serif";color:#44546a">I am unable to get the Auto Voice VLAN function to work correctly.</span><u></u><u></u></p>
<p class="MsoNormal"><span style="font-family:"Arial","sans-serif";color:#44546a"> </span><u></u><u></u></p><p class="MsoNormal"><span style="font-family:"Arial","sans-serif";color:#44546a">I have set the “user ports” as untagged for VLAN 20 (data vlan)</span><u></u><u></u></p>
<p class="MsoNormal"><span style="font-family:"Arial","sans-serif";color:#44546a"> </span><u></u><u></u></p><p class="MsoNormal"><span style="font-family:"Arial","sans-serif";color:#44546a">Under VLAN Management -> Voice VLAN -> Properties, I have defined VLAN 30 as the voice vlan and enabled the auto voice vlan with activation immediate. CDP and LLDP are all configured (defaults). Smartport features are all defaults.</span><u></u><u></u></p>
<p class="MsoNormal"><span style="font-family:"Arial","sans-serif";color:#44546a"> </span><u></u><u></u></p><p class="MsoNormal"><span style="font-family:"Arial","sans-serif";color:#44546a">I have connected two IP Phones – a 7941 and and a 7940. Both draw an IP address from the attached router (port 9 on the switch is configured as a trunk up to a router running DHCP) – but an IP address out of the data VLAN. As they don’t get an Option 150 address, they don’t register.</span><u></u><u></u></p>
<p class="MsoNormal"><span style="font-family:"Arial","sans-serif";color:#44546a"> </span><u></u><u></u></p><p class="MsoNormal"><span style="font-family:"Arial","sans-serif";color:#44546a">When I look at the Smartport Interface settings for ports 7 and 8, it indicates Smartport Application Method is disabled as the Smartport Type is Unknown.</span><u></u><u></u></p>
<p class="MsoNormal"><span style="font-family:"Arial","sans-serif";color:#44546a"> </span><u></u><u></u></p><p class="MsoNormal"><span style="font-family:"Arial","sans-serif";color:#44546a">I also attached a regular laptop to Port 5 on the switch. It drew a data vlan IP address and it too showed up as Smartport Type Unknown</span><u></u><u></u></p>
<p class="MsoNormal"><span style="font-family:"Arial","sans-serif";color:#44546a"> </span><u></u><u></u></p><p class="MsoNormal"><span style="font-family:"Arial","sans-serif";color:#44546a">So, I ran the diagnostics on the two ports to which the IP phones were attached. The macro is failing at the line</span><u></u><u></u></p>
<p class="MsoNormal"><span style="font-family:"Arial","sans-serif";color:#44546a"> </span><u></u><u></u></p><p class="MsoNormal"><span style="font-family:"Arial","sans-serif";color:#44546a">“smartport switchport trunk allowed vlan add <i>$voice-vlan</i>”</span><u></u><u></u></p>
<p class="MsoNormal"><span style="font-family:"Arial","sans-serif";color:#44546a"> </span><u></u><u></u></p><p class="MsoNormal"><span style="font-family:"Arial","sans-serif";color:#44546a">So, this makes sense to me. The macro is not applying the voice vlan to the switchport, hence the phone is not getting the correct vlan and thus not getting the correct dhcp scope and tftp service IP address.</span><u></u><u></u></p>
<p class="MsoNormal"><span style="font-family:"Arial","sans-serif";color:#44546a"> </span><u></u><u></u></p><p class="MsoNormal"><span style="font-family:"Arial","sans-serif";color:#44546a">So, the question is, why is the macro failing?</span><u></u><u></u></p>
<p class="MsoNormal"><span style="font-family:"Arial","sans-serif";color:#44546a"> </span><u></u><u></u></p><p class="MsoNormal"><span style="font-family:"Arial","sans-serif";color:#44546a">I go back to the Voice Vlan properties page and confirm that I have 30 set for the voice vlan and that I have applied the change. The page shows that the operational status of the voice vlan is 30.</span><u></u><u></u></p>
<p class="MsoNormal"><span style="font-family:"Arial","sans-serif";color:#44546a"> </span><u></u><u></u></p><p class="MsoNormal"><span style="font-family:"Arial","sans-serif";color:#44546a">Anyone run into this or have any suggestions?</span><u></u><u></u></p>
<p class="MsoNormal"><span style="font-family:"Arial","sans-serif";color:#44546a"> </span><u></u><u></u></p><div><p class="MsoNormal"><span style="font-family:"Arial","sans-serif";color:#1f497d">------------------------------------------------------------------------------------</span><u></u><u></u></p>
<p class="MsoNormal"><span style="font-family:"Arial","sans-serif";color:#1f497d">Dr. Jeffrey T. Girard (Jeff), PhD</span><u></u><u></u></p><p class="MsoNormal"><span style="font-family:"Arial","sans-serif";color:#1f497d">Colonel, United States Army (Retired)</span><u></u><u></u></p>
<p class="MsoNormal"><span style="font-family:"Arial","sans-serif";color:#1f497d">Senior Network Engineer / VoIP Engineer - <a href="http://WireMeHappy.com" target="_blank">WireMeHappy.com</a></span><u></u><u></u></p>
<p class="MsoNormal"><span style="font-family:"Arial","sans-serif";color:#1f497d">reply to: <a href="mailto:jeffrey.girard@wiremehappy.com" target="_blank">jeffrey.girard@wiremehappy.com</a></span><u></u><u></u></p>
<p class="MsoNormal"><span style="font-family:"Arial","sans-serif";color:#1f497d"><a href="tel:%28607%29835-0406" target="_blank">(607)835-0406</a> (home office)</span><u></u><u></u></p><p class="MsoNormal">
<span style="font-family:"Arial","sans-serif";color:#1f497d"><a href="tel:%28845%29764-1661" target="_blank">(845)764-1661</a> (mobile)</span><u></u><u></u></p><p class="MsoNormal"><span style="font-family:"Arial","sans-serif";color:#1f497d"><a href="tel:%28607%29835-0458" target="_blank">(607)835-0458</a> (fax)</span><u></u><u></u></p>
</div></div></div><p class="MsoNormal" style="margin-bottom:12.0pt"><br>_______________________________________________<br>cisco-voip mailing list<br><a href="mailto:cisco-voip@puck.nether.net" target="_blank">cisco-voip@puck.nether.net</a><br>
<a href="https://puck.nether.net/mailman/listinfo/cisco-voip" target="_blank">https://puck.nether.net/mailman/listinfo/cisco-voip</a><u></u><u></u></p></blockquote></div><p class="MsoNormal"> <u></u><u></u></p></div></div>
</blockquote><blockquote style="margin-top:5.0pt;margin-bottom:5.0pt"><div><p class="MsoNormal">_______________________________________________<br>cisco-voip mailing list<br><a href="mailto:cisco-voip@puck.nether.net" target="_blank">cisco-voip@puck.nether.net</a><br>
<a href="https://puck.nether.net/mailman/listinfo/cisco-voip" target="_blank">https://puck.nether.net/mailman/listinfo/cisco-voip</a><u></u><u></u></p></div></blockquote></div></div></div></div><br>_______________________________________________<br>
cisco-voip mailing list<br>
<a href="mailto:cisco-voip@puck.nether.net">cisco-voip@puck.nether.net</a><br>
<a href="https://puck.nether.net/mailman/listinfo/cisco-voip" target="_blank">https://puck.nether.net/mailman/listinfo/cisco-voip</a><br>
<br></blockquote></div><br></div>