<div dir="ltr">I think the CUBE should do RTCP passthrough. Make sure RTCP is enabled on the 9971 under the Product Specific Config.<div><br></div><div>Run "show voip rtp connections detail" on the CUBE to see the RTCP packet counters. I'm not sure how accurate these numbers will be using flow-around.</div>
<div><br></div><div>Brian</div></div><div class="gmail_extra"><br><br><div class="gmail_quote">On Mon, Jun 9, 2014 at 11:00 AM, Jason Aarons (AM) <span dir="ltr"><<a href="mailto:jason.aarons@dimensiondata.com" target="_blank">jason.aarons@dimensiondata.com</a>></span> wrote:<br>
<blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">
<div lang="EN-US" link="blue" vlink="purple">
<div>
<p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1f497d">I do not.
<u></u><u></u></span></p>
<p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1f497d"><u></u> <u></u></span></p>
<p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1f497d">The CUBE is flow-around. I tested adding a video codec h264 on the CME dial-peer and that didn’t resolve it.<u></u><u></u></span></p>
<p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1f497d"><u></u> <u></u></span></p>
<p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1f497d">I’ll pull more ccm and CME traces and dig into it this week.
<u></u><u></u></span></p>
<p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1f497d"><u></u> <u></u></span></p>
<p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1f497d">Does CME 9971 have RTCP enabled by default out a SIP trunk? Does CUBE care about RTCP?<u></u><u></u></span></p>
<p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1f497d"><u></u> <u></u></span></p>
<div>
<div style="border:none;border-top:solid #e1e1e1 1.0pt;padding:3.0pt 0in 0in 0in">
<p class="MsoNormal"><b><span style="font-size:11.0pt;font-family:"Calibri","sans-serif"">From:</span></b><span style="font-size:11.0pt;font-family:"Calibri","sans-serif""> <a href="mailto:bmeade90@gmail.com" target="_blank">bmeade90@gmail.com</a> [mailto:<a href="mailto:bmeade90@gmail.com" target="_blank">bmeade90@gmail.com</a>]
<b>On Behalf Of </b>Brian Meade<br>
<b>Sent:</b> Monday, June 09, 2014 10:31 AM<br>
<b>To:</b> Jason Aarons (AM)<br>
<b>Cc:</b> cisco-voip (<a href="mailto:cisco-voip@puck.nether.net" target="_blank">cisco-voip@puck.nether.net</a>)<br>
<b>Subject:</b> Re: [cisco-voip] Jabber 9.7 Softphone to CME 9.1 IOS 15.2 9971 no video<u></u><u></u></span></p>
</div>
</div><div><div class="h5">
<p class="MsoNormal"><u></u> <u></u></p>
<p class="MsoNormal" style="margin-bottom:12.0pt"><u></u> <u></u></p>
<div>
<p class="MsoNormal">Jason,<u></u><u></u></p>
<div>
<p class="MsoNormal"><u></u> <u></u></p>
</div>
<div>
<p class="MsoNormal">Do you have MTP Required on the SIP Trunk? Can you pull the CallManager traces with the SIP Stack trace enabled as well?<u></u><u></u></p>
</div>
<div>
<p class="MsoNormal"><u></u> <u></u></p>
</div>
<div>
<p class="MsoNormal">Thanks,<u></u><u></u></p>
</div>
<div>
<p class="MsoNormal">Brian<u></u><u></u></p>
</div>
</div>
<div>
<p class="MsoNormal" style="margin-bottom:12.0pt"><u></u> <u></u></p>
<div>
<p class="MsoNormal">On Sun, Jun 8, 2014 at 1:23 PM, Jason Aarons (AM) <<a href="mailto:jason.aarons@dimensiondata.com" target="_blank">jason.aarons@dimensiondata.com</a>> wrote:<u></u><u></u></p>
<blockquote style="border:none;border-left:solid #cccccc 1.0pt;padding:0in 0in 0in 6.0pt;margin-left:4.8pt;margin-right:0in">
<div>
<div>
<p class="MsoNormal">I can make calls Jabber sotphone/Jabber softphone with video fine.<u></u><u></u></p>
<p class="MsoNormal">I can make calls Jabber softphone to same cluster CUCM 9971 with video fine.<u></u><u></u></p>
<p class="MsoNormal"> <u></u><u></u></p>
<p class="MsoNormal">When I make a call Jabbe Softphone call via CUCM SIP Trunk to CUBE to CME 9.1 15.2 I get no video. Any ideas? Is there a setting for RTCP on a sip trunk or in CME somewhere?
As I saw a similar issue on NetPro resolve that.<u></u><u></u></p>
<p class="MsoNormal"> <u></u><u></u></p>
<p class="MsoNormal">CUCM 9.1<u></u><u></u></p>
<p class="MsoNormal">CUE IOS 15.1<u></u><u></u></p>
<p class="MsoNormal">CME 9.1 / IOS 15.2M5<u></u><u></u></p>
<p class="MsoNormal">9971 SIP9.4.1.9<u></u><u></u></p>
</div>
</div>
<p class="MsoNormal" style="margin-bottom:12.0pt"><br>
_______________________________________________<br>
cisco-voip mailing list<br>
<a href="mailto:cisco-voip@puck.nether.net" target="_blank">cisco-voip@puck.nether.net</a><br>
<a href="https://puck.nether.net/mailman/listinfo/cisco-voip" target="_blank">https://puck.nether.net/mailman/listinfo/cisco-voip</a><u></u><u></u></p>
</blockquote>
</div>
<p class="MsoNormal"><u></u> <u></u></p>
</div>
</div></div><p class="MsoNormal"><br>
<br>
<span style="color:white">itevomcid</span> <u></u><u></u></p>
</div>
</div>
</blockquote></div><br></div>