<div dir="ltr"><p>Confirmed still a bug, I asked TAC to review the "enhancement" mark as configuration options exist .  </p><p dir="ltr">Good idea will do tomorrow, I saw somthing with active active dns round robin<br>

On 05/06/2014 9:43 PM, "Tim Smith" <<a href="mailto:tim.smith@enject.com.au" target="_blank">tim.smith@enject.com.au</a>> wrote:<br>
><br>
> Hi mate,<br>
><br>
>  <br>
><br>
> I remember something about this, I thought it was waiting for a fix in Jabber client, but can’t seem to find anything.<br>
><br>
> Have you tried a profile to test the 2nd server as the primary mail store? i.e. just confirm it is actually working in non-failover.<br>
><br>
>  <br>
><br>
> I like how bug was marked as 6, product enhancement.<br>
><br>
>  <br>
><br>
> Cheers,<br>
><br>
>  <br>
><br>
> Tim.<br>
><br>
>  <br>
><br>
> From: cisco-voip [mailto:<a href="mailto:cisco-voip-bounces@puck.nether.net" target="_blank">cisco-voip-bounces@puck.nether.net</a>] On Behalf Of Andrew Grech<br>
> Sent: Thursday, 5 June 2014 5:03 PM<br>
> To: Cisco VoIP Group<br>
> Subject: [cisco-voip] Voice-mail Failover CUC is not working<br>
><br>
>  <br>
><br>
> Hi All,<br>
><br>
>  <br>
><br>
> I have just finished installing a subscriber Unity 10.x server. Then I changed my ports to distribute Incoming and outgoing calls.<br>
><br>
>  <br>
><br>
> I tested a fail over and it worked fine, apart from the fact Jabber was unable to connect to the voice-mail sever. I then checked my presence template and added the new server. Like this post<br>
><br>
>  <br>
><br>
> <a href="https://supportforums.cisco.com/discussion/11843221/failover-cuc-not-working#comment-9745211" target="_blank">https://supportforums.cisco.com/discussion/11843221/failover-cuc-not-working#comment-9745211</a><br>

><br>
>  <br>
><br>
> Does anyone know if this bug is still valid for CUCM\Presence 10 \ Unity 10 jabber 10?<br>
><br>
>  <br>
><br>
> Is there anything else I should be doing to finish off the cluster setup?<br>
><br>
>  <br>
><br>
> Thanks<br>
><br>
>  <br>
><br>
> Andrew</p>
</div>