What if...just what if, it's alternating between 3 and 4 digits every time you unplug it? Try unplugging it and re-plugging it into the same router to validate this crazy idea.<br><br><div class="gmail_quote">On Sun Nov 16 2014 at 7:21:11 PM Jason Aarons (AM) <<a href="mailto:jason.aarons@dimensiondata.com">jason.aarons@dimensiondata.com</a>> wrote:<br><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">
<div>
<div>If you move circuit to another router and it works, then its hard to blame the carrier! </div>
<div><br>
</div>
<div>CAS stinks.</div>
<div><br>
</div>
<div><br>
</div>
<div>
<div style="font-size:8px;color:#575757">Sent from my Verizon Wireless 4G LTE Smartphone</div>
</div></div><div>
<br>
<br>
<div>-------- Original message --------</div>
<div>From: Ryan Huff </div>
<div>Date:11/16/2014 15:45 (GMT-05:00) </div>
<div>To: "Jason Aarons (AM)" , <a href="mailto:cisco-voip@puck.nether.net" target="_blank">cisco-voip@puck.nether.net</a> </div>
<div>Subject: RE: [cisco-voip] E1 CAS card in Mexico not getting enough digits </div>
<div><br>
</div>
<div>
<div dir="ltr">Ahh, missed the part about CAS, sorry. <br>
<br>
So is the provider doing something on their side with the MAC of the E1 on your side? If the provider is sending 3 digits (regardless if it works on the other router) then it should be their issue.<br>
<br>
You have the plan and type set according to what the provider expects?<br>
<br>
Are you getting 3 digits for the calling or called party?<br>
<br>
<hr>
From: <a href="mailto:jason.aarons@dimensiondata.com" target="_blank">jason.aarons@dimensiondata.com</a><br>
To: <a href="mailto:ryanhuff@outlook.com" target="_blank">ryanhuff@outlook.com</a>; <a href="mailto:cisco-voip@puck.nether.net" target="_blank">cisco-voip@puck.nether.net</a><br>
Subject: RE: [cisco-voip] E1 CAS card in Mexico not getting enough digits<br>
Date: Sun, 16 Nov 2014 19:56:50 +0000<br>
<br>
<div>
<p><span style="font-size:11.0pt;font-family:"Calibri",sans-serif;color:#1f497d">CAS no q931</span></p>
<p><span style="font-size:11.0pt;font-family:"Calibri",sans-serif;color:#1f497d"> </span></p>
<p><span style="font-size:11.0pt;font-family:"Calibri",sans-serif;color:#1f497d">Debug shows on bad router we receive 3 digits from provider, move circuit to another router we receive 4 digits from provider.</span></p>
<p><a name="msg-f:1484979983879917956__MailEndCompose"><span style="font-size:11.0pt;font-family:"Calibri",sans-serif;color:#1f497d"> </span></a></p>
<div>
<div style="border:none;border-top:solid #e1e1e1 1.0pt;padding:3.0pt 0in 0in 0in">
<p><b><span style="font-size:11.0pt;font-family:"Calibri",sans-serif">From:</span></b><span style="font-size:11.0pt;font-family:"Calibri",sans-serif"> Ryan Huff [mailto:<a href="mailto:ryanhuff@outlook.com" target="_blank">ryanhuff@outlook.com</a>]
<br>
<b>Sent:</b> Sunday, November 16, 2014 8:52 AM<br>
<b>To:</b> Jason Aarons (AM); <a href="mailto:cisco-voip@puck.nether.net" target="_blank">cisco-voip@puck.nether.net</a><br>
<b>Subject:</b> RE: [cisco-voip] E1 CAS card in Mexico not getting enough digits</span></p>
</div>
</div>
<p> </p>
<p> </p>
<div>
<p>So on router B, do the following and then place an inbound call from a known number:<br>
<br>
hostname# conf t<br>
hostname (config)# logging console <br>
hostname (config)# exit<br>
hostname# term mon <br>
hostname# debug isdn q931<br>
<br>
What do you see for "Calling Party Number i =", "Plan:" and "Type:"? The "plan" and "type" fields should be located below the "calling party number" field. Once you've determined that you really are receiving 4 digits from the telco on that circuit the next
step is to figure out what in the router config is stripping the digit. If you find that you are not receiving 4 digits from the telco, you can either work with the telco to fix it on the PRI or if the missing digit is a constant, you can add it with an inbound
voice translation rule.<br>
<br>
Look at your inbound dial peers; do you have any voice translation rules that are doing any digit stripping? Are the inbound voice translations using different regex than on the router that is working and if so, what is different?<br>
<br>
Thanks,<br>
<br>
Ryan Huff<br>
CCIE Collaboration (Written), CCNP Voice, CCNA Voice<br>
CCNA Route/Switch, CCNA Wireless, UCCX Specialist</p>
<div align="center" style="text-align:center">
<hr size="3" width="100%" align="center">
</div>
<p>From: <a href="mailto:jason.aarons@dimensiondata.com" target="_blank">
jason.aarons@dimensiondata.com</a><br>
To: <a href="mailto:cisco-voip@puck.nether.net" target="_blank">cisco-voip@puck.nether.net</a><br>
Date: Sun, 16 Nov 2014 08:18:22 +0000<br>
Subject: [cisco-voip] E1 CAS card in Mexico not getting enough digits</p>
<div>
<p>I have a problem with a E1 CAS site in Mexico. I have two routers. Router B is problem. </p>
<p> </p>
<p>In router A I see 4 digits come in on DTMF. </p>
<p>In router B I see 3 digits come in on DTMF. We are missing 1 digit.</p>
<p> </p>
<p>I swap the circuit and works fine in router A. Same IOS both routers.</p>
<p> </p>
<p>Controller e1 0/0/0</p>
<p> Framing NO-CRC4</p>
<p> dso-group 0 timeslots 1-10 type r2-digital dtmf dnis</p>
<p> cas-custom 0</p>
<p> Country telmex</p>
<p> Seizure-ackt-time 2</p>
<p> </p>
<p> </p>
<p> </p>
<p> </p>
</div>
<p><br>
_______________________________________________ cisco-voip mailing list <a href="mailto:cisco-voip@puck.nether.net" target="_blank">
cisco-voip@puck.nether.net</a> <a href="https://puck.nether.net/mailman/listinfo/cisco-voip" target="_blank">
https://puck.nether.net/mailman/listinfo/cisco-voip</a> </p>
</div>
<p><br>
<br>
<span style="color:white">itevomcid</span> </p>
</div>
</div>
</div>
</div>
______________________________<u></u>_________________<br>
cisco-voip mailing list<br>
<a href="mailto:cisco-voip@puck.nether.net" target="_blank">cisco-voip@puck.nether.net</a><br>
<a href="https://puck.nether.net/mailman/listinfo/cisco-voip" target="_blank">https://puck.nether.net/<u></u>mailman/listinfo/cisco-voip</a><br>
</blockquote></div>