<div dir="ltr">We are seeing an odd error on a migration from a Nortel setup over to an h323 setup.<div><br></div><div><div>the error message after entering PRI 2 is </div><div><br></div><div><b>crsvr1(config-controller)#pri-group timeslots 1-24 nfas_ backup nfas_int 1 nfas_group 1</b></div><div><b><br></b></div><div><b>%The Primary-group is already defined</b></div><div><b>%The first definition of the primary-group must be removed before the primary-group can be redefined</b></div></div><div><br></div><div>Getting this after putting the timeslots command on the first pri, then seeing this error on the 2nd controller.</div><div><br></div><div>This is on 15.2 on a 3945.  I've done this before with no issues, but have never seen this error before.</div><div><br></div><div>Thanks</div><div><br></div></div>