<html>
<head>
<style><!--
.hmmessage P
{
margin:0px;
padding:0px
}
body.hmmessage
{
font-size: 12pt;
font-family:Calibri
}
--></style></head>
<body class='hmmessage'><div dir='ltr'>Add a new phone device using the 7942 device type. Then build out the device config line for line compared with the 7940 config. Pay attention the phone template/softkey templates ... etc.<br><br>Thanks,<br><br>Ryan Huff<br>ryanthomashuff.com<br>CCNA R/S, CCNA Wireless, CCNP Voice, UCCX Specialist<br><br><br><div><hr id="stopSpelling">Date: Wed, 17 Dec 2014 09:10:56 -0500<br>From: dzhars@gmail.com<br>To: cisco-voip@puck.nether.net<br>Subject: [cisco-voip] Replace 7940 with 7942<br><br><div dir="ltr"><div>I have a two line 7940 setup but the internal mic is not working. SO i bought a 7942 replacement. If I were doing a 7940 for 7940 replacement, I would just login to CM to do a MAC Address change. What is the best/easiest way to do this since I am replacing it with a 7942?<br><br></div>Thanks.<br></div>
<br>_______________________________________________
cisco-voip mailing list
cisco-voip@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip</div> </div></body>
</html>